La Crosse Technology 922-818 Dimensions

La Crosse Technology, Ltd. Page 1
922-818 FAQS
The links below will work in most PDF viewers and link to the topic area by clicking the link. We
recommend Adobe Reader version 10 or greater available at: http://get.adobe.com/reader
CONTENTS
922-818 FAQS........................................................................................................................... 1
What is the distance between Thermometer and Pager? ............................................ 1
Power Requirements .......................................................................................................... 1
How do I switch from Fahrenheit to Celsius?................................................................. 1
How do I set time? ............................................................................................................. 1
How do I set the timer?..................................................................................................... 2
What does RANGE OUT mean?......................................................................................... 2
What does Lo readings mean? ......................................................................................... 2
Using the temperature probe........................................................................................... 2
Grilling tips. ......................................................................................................................... 2
What is the distance between Thermometer and Pager?
100 feet in open air.
Power Requirements
Thermometer = 2 AAA batteries
Pager = 2 AAA batteries
How do I switch from Fahrenheit to Celsius?
Press and release the MODE button three times and °F (Fahrenheit) will flash.
Press the HR or MIN button to change to Celsius.
How do I set time?
1. Press MODE to display time.
2. Hold MODE: Time will flash.
3. Press HR to set the hours.
4. Press MIN to set the minutes.
5. Press MODE: 12hr will flash.
6. Press HR or MIN for 24-hour time.
7. Press MODE: °F will flash for Fahrenheit.
8. Press HR or MIN to select Celsius.
9. Press MODE to confirm and exit.

La Crosse Technology, Ltd. Page 2
How do I set the timer?
Thermometer:
1. Press MODE to display timer.
2. Press HR and MIN to set timer. (The down arrow shows timer is set)
3. Press START/STOP to start or stop the countdown timer.
Pager:
1. Press MODE to display timer.
2. Press HR and MIN to set timer. (The down arrow shows timer is set)
3. Press START/STOP to start or stop the countdown
timer.
Reset Timers:
Hold both HR and MIN buttons together for 3 seconds to reset timer to zero.
What does RANGE OUT mean?
If you move the pager out of transmission range, the temperature reading will
show dashes, sound one long beep, and flash RANGE OUT.
The reception icon (tower) will not show.
What does Lo readings mean?
A reading of Lo °F indicates that the temperature probe is not connected to the
thermometer.
Using the temperature probe.
Before cooking, insert the metal temperature probe deeply into your meat.
With roasts, steaks, and thick chops, insert the thermometer into the thickest
part, away from bone, fat, and gristle.
With whole poultry, insert the thermometer into the inner thigh area near the
breast but away from the bone.
With ground meat (such as meat loaf), insert the thermometer into the
thickest area.
Thin meats such as chops and hamburger patties; insert the thermometer
sideways for accurate readings.
Grilling tips.
Be sure the thermometer cord is out of the grill, away from flareups.
Tinfoil may be used to minimize chance of flareup.
Part of the probe not in the meat should be positioned over the meat.
Do not place probe on direct heat.
Clean thoroughly before each use.