La Crosse Technology WS-9160Uv3 User manual

SET UP GUIDE
MODEL: WS-9160Uv3
Wireless Thermometer

Table of Contents
Power Up
Custom Calendar Display
Settings Menu
03
03
04
09
10
11
11
11
12
12
12
BASICS TEMPERATURE/HUMIDITY
APPENDIX
Temp./Humidity Readings
Temp./Humidty Records
Reset Records
05
06
07
2
Stay in Touch
Specifications
Care & Maintenance
California Statement
FCC Statement
We’re Here to Help
Warranty & Patents
Double Warranty Oer
ADD-ON SENSORS
Add Sensors
View Add-on Sensors
Purchase Add-on Sensors
09
09
09
SENSORS
Sensor Mounting
Search for Sensors
Factory Restart
Sensor Weather Shield
07
08
08
08

1. Insert 2-AA batteries into your Temperature Sensor.
2. Insert 2-AA batteries into your Station.
4. Once readings from you sensor appears on your station, you can mount
it outside. See page 7for more details.
Watch our sensor mounting videos: bit.ly/th_sensor_mounting
Power Up
3
TH Sensor
TX141-B
(all versions)
Weather Station
WS-9160Uv3
AA
AA
• Press and release the DATE button to change the display of the Calendar,
or have it not show.
• Thermometer will stay on selection.
Custom Calendar Display
AA
AA

4
Settings Menu
1. Hold the SET button until the display changes, to enter the Settings
Menu.
2. Press and release the +/- buttons to adjust values. Hold to adjust quickly.
3. Press and release the SET button to confirm values and move to
the next setting or exit.
Settings Menu Order:
• Hello
• Language (English, Español, Français, Deutsch)
• 12/24 Hour Format
• Hour
• Minutes
• Year
• Month
• Date
• Month/Date, Date/Month
• Fahrenheit/Celsius
• Thank You
Language: The language selected in this menu will control other menu
items as well as your full weekday readout.
Weekday: The Weekday will set automatically when your Year, Month and
Date are set.

5
Temperature/Humidity Readings
Current Indoor Humidity.
Press the HUMIDITY
button to view.
Indicates readings from
sensor on channel 1, 2, or
3 if multiple sensors are
connected to the station.
Current Indoor
Temperature.
Current Outdoor
Temperature.
Low Battery in Station
3. LOW BATTERY ICON
1. INDOOR TEMPERATURE
Indicates if the station is
receiving data from the
sensor.
6. RECEPTION ICON
8. CHANNEL INDICATOR
4. OUTDOOR TEMPERATURE
2. INDOOR HUMIDITY
Readings will automatically
scroll through each
channel when multiple
sensors are connected..
7. AUTO-SCROLL ICON
INDOOR
OUTDOOR
INDOOR
OUTDOOR
Low Battery in Sensor
5. LOW BATTERY ICON

6
Viewing Records
Temperature Records (MIN/MAX)
Press and release the MIN/MAX button to toggle MIN/MAX readings with
time/date stamp. Time and date of the record will show.
Viewing Order:
• Indoor Minimum Temperature Record
• Indoor Maximum Temperature Record
• Outdoor Minimum Temperature Record Channel 1
• Outdoor Maximum Temperature Record Channel 1
Note: If additional Temperature sensors are added, additional presses of
the MIN/MAX button will show those records as well.
INDOOR
OUTDOOR
MAX
INDOOR
OUTDOOR
MIN INDOOR
OUTDOOR MAX
INDOOR
OUTDOOR MIN
Indoor MIN Temp. Indoor MAX Temp. Outdoor MIN Temp. Outdoor MAX Temp.

7
Reset Temperature Records
1. Press and release the MIN/MAX button to view the individual
temperature values you’d like to reset.
2. Hold the MINUS (-) button until dashes appear.
3. The reading will then reset to the current value.
Sensor Mounting
For Accurate Temperature Measurements
•Insert a mounting screw through the hole at the top to
securely mount the sensor. It can also hang from the
back using a nail.
•Mount the sensor vertically in a protected well-shaded
area. Keeping it out of direct weather elements such
as sunlight, rain, snow, etc. will help avoid inaccurate
readings.
•For additional protection against weather elements, a
Sensor Weather Shield: bit.ly/weather-shield can be
purchased separately.
•The maximum wireless transmission range to the station
is up to 330ft (100m) in open air. This does not include
walls, floors, or other large obstructions.
•For online video instructions, visit:
bit.ly/th_sensor_mounting

8
If you are seeing “NO” or dashes for any sensor readings, please try the
following steps:
1. Hold the SENSOR button to search for all sensors.
The Reception Indicator will begin to animate.
2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside next
to the display and remove power from the sensor and station.
3. Press any button on the station 20 times and leave the parts sit for a few
moments with the power o.
4. Install a new set of alkaline batteries into the sensor, then power up your
station again.
5. If your sensor data is still not appearing after these steps, please contact our
support sta. For additional help visit: bit.ly/basic_restart
Search for Sensors
• The Sensor Weather Shield is designed to protect your outdoor
sensor from rain and snow.
• This shield will oer limited protection from the sun’s heat.
• Optional purchase at: bit.ly/925-1418
Sensor Weather Shield (not included)
Factory Restart
If your station is acting strangly, hold the DATE and RAIN buttons together to
factory restart your station.

9
This station can read an add-on Rain Sensor, which will read in the Time Area. It can
also read up to two additional Temperature/Humidity Sensors , which will show as
Channel 2 or 3 in the Outdoor Temperature Area.
Add Sensors
1. Install batteries into your add-on Rain or Temperature/Humidity sensor(s).
Note: For Temp/Humidity sensors, be sure to select channel (2 or 3) before you
insert batteries.
2. Hold the SENSOR button until the Reception Indicator starts to animate. This
will start a search for your sensors.
3. Your sensor(s) should connect within the next few minutes.
View Add-on Sensors:
• Press the RAIN button to view Rain readings and history.
• Press the SENSOR button to toggle through readings from sensors 1, 2 or 3.
Note: When multiple sensors are connected the you can view individual sensors or
auto-scroll through all three channels. The auto-scroll indicator will lose one
segment every 1 second, for 5 seconds, then switch to the next channel.
Purchase Extra Sensors
Visit: bit.ly/ws-9160uv3_parts to find and purchase
compatible add-on sensors.
Optional Add-on Sensors
SCAN HERE
For Parts
Ask questions, watch setup videos, and provide feedback on our social media
outlets. Follow La Crosse Technology on YouTube, Twitter, Facebook and Instagram.
Stay in Touch!

10
Weather Station (WS-9160Uv3)
Temperature Range:
32ºF to 122ºF (0ºC to 50ºC)
Humidity Range:
10% - 99% RH
Power:
2-AA, IEC, LR6 batteries
(not included)
Battery Life:
Over 24 months
Specifications
TH Sensor (TX141-B (all versions)
Temperature Range:
-40°F to 140°F (-40°C to 60°C)
Humidity Range:
10% - 99% RH
Transmission Range:
Over 330 feet (100 meters) in
open air RF 433MHz
Update Interval:
About every 51 seconds
Power:
2-AA, IEC, LR6 batteries (not included)
Battery Life:
Over 24 months
3.96”
10.05cm
2.13”
5.41cm
1.06”
2.69cm
3.35”
8.50cm
5.91”
15.01cm