La Crosse 403-312 User manual

www.lacrosseclock/support
Instructions Manual:
403-312
DC: 092616
Wall Clock with Glowing Hands
Setup
1: Insert 4 fresh AA, LR6 1.5 volt ALKALINE batteries according to
the polarity markings.
2: Rotate the Time Set Wheel to set the time.
3: Mount on the wall and enjoy!
Note: The quartz movement will keep the clock running accurately. If the
clock does not operate, or steadily loses time, replace the batteries.
Glowing Hands
•There is a light sensor between the number 4 and 5.
•Light sensor activates efficient green LEDs to illuminate minute and
hour hands in darkness
Frequently Asked Questions
Q. How long will the batteries last?
A. Good AA alkaline batteries will last over 12 months.
Q: Will this clock provide times around the world?
A: The time is set manually. The clock may be set for any time around
the world.
AA
AA
AA
AA
Clock Battery
Glowing Hands
Batteries
Time Set

www.lacrosseclock/support
Q: Why do the hands spin?
A: Hands may spin if the batteries is under powered or over powered.
Use only Alkaline batteries in the clock.
Limited Warranty
This product is warranted to be free from defects in material and
workmanship under normal use and service for a period of 2 years from
the date of sale to the customer. Warranty will not apply to defects
resulting from abuse, accidents, or misuse. If a defect that is covered by
this warranty arises during the warranty period, promptly return the clock
(postage prepaid) with proof of purchase showing the date the clock was
purchased to the following address and such defects will be repaired, or
the products will be replaced at La Crosse Clock Company option
without charge.
La Crosse Clock Company
Warranty Department
2830 South 26th Street.
La Crosse, WI 54601
www.lacrosseclock.com/support
Specifications
Power Requirements: 4 AA (LR6, IEC) Alkaline Batteries (not included)
Battery Life: over 12 months
Care and Maintenance
•Always purchase the correct size and grade of batteries most
suitable for intended use.
•Clean the batteries contacts and also those of the device prior to
batteries installation.
•Ensure the batteries is installed with correct polarity (+and -).
•Remove batteries from equipment which is not to be used for an
extended period of time.
•Remove expired batteries promptly.
•The specs of this wall clock may change without prior notice.
•Improper use or unauthorized opening of housing voids warranty.
Made in China – Printed in China