La Crosse WT525 User manual

Model: WT525 www.lacrossetechnology.fr Page | 1
Model: WT525
Quick Setup Guide
Projection Time Alarm
Time
Calendar or
Alarm Time
Projection Arm
Adjustable
FRONT
Foldout
Stand Open
Clock Closed
Pull firmly to open.
Battery compartment
2-“AAA” batteries
Standard USB
Output 1A for charging
mobile devices
Micro-USB port
to operate clock
BUTTONS

Model: WT525 www.lacrossetechnology.fr Page | 2
GET STARTED
Step 1: With the cover/stand closed, insert 2 new“AAA”batteries (not
included) into the back of projection alarm. Observe correct polarity.
Step 2: Looking at the top of the clock, firmly pull the cover/stand
open to view the clock.
Step 3: Optional Micro-USB power cord (included) for constant,
adjustable backlight and projection.
Insert the Micro-USB end of the cord into the clock and the
USB end into your computer USB port or a USB outlet (not
included).
Restart: Unplug the Micro-USB cord and remove batteries from the
projection alarm, press a button 20 times. After 15 minutes, return to
Step 1 above.
SET TIME AND DATE
1. Hold the MODE/REG button to enter time set mode.
2. Use the ▲+ or ▼ -buttons to adjust values.
Press and hold those buttons for fast adjustment.
3. Press the MODE/REG button to confirm adjustments and move to
the next item.
Time and Date setting order:
1. 12/24 Hour Time Format
2. Hour
3. Minutes
4. Year
5. Month
6. Date
Note: Day of the week sets automatically when year, month and date
are set.
Press the MODE/REG button to exit, or wait 20 seconds without
pressing buttons to return to the normal time display.
SET TIME ALARM
1. Press the ALARME button to view the alarm time, in
alarm mode.
2. In alarm mode, hold the ALARME button to enter
alarm time set mode.
3. Use the ▲+ or ▼- buttons to adjust values.

Model: WT525 www.lacrossetechnology.fr Page | 3
4. Press the ALARME button to confirm
adjustments and move to the next item.
Alarm Time setting order:
1. Hours
2. Minutes
ACTIVATE/DEACTIVATE TIME ALARM
Press the ALARME button once to view alarm time.
Press the ALARME button again to activate the alarm.
Bell icon appears.
Press the ALARME button again to deactivate the
alarm.
The bell icon disappears.
SNOOZE (Silences alarm temporarily)
Press the SNOOZE/ECLAIRAGE button to
silence alarm for 10 minutes.
Zz will show above the time.
When in snooze mode, press
SNOOZE/ECLAIRAGE to stop alarm for one day.
Note: The alarm is crescendo sound. The alarm will sound for 2
minutes and then shut off completely.
CALENDAR OR ALARM TIME DISPLAY
Press the MODE/REG button to select Alarm Time
or Calendar to be displayed.
BACKLIGHT BRIGHTNESS-MICRO-USB POWER
Press and release the SNOOZE/ECLAIRAGE button
to adjust the brightness of the backlight:
ON Bright (HA)
ON Dim (BAS)
OFF
Note: When the Micro-USB cord is NOT in use, the High/Low/Off
(HA-BAS-OFF) features are not available.
When operating on battery power only, press the
SNOOZE/ECLAIRAGE button for a 10 second backlight and
projection. The projection will not stay on with battery power only.

Model: WT525 www.lacrossetechnology.fr Page | 4
PROJECTION (rotate, projection arm)
Battery Power: Press and release the
SNOOZE/ECLAIRAGE button to show the projection
for 10 seconds.
Micro-USB Cord: Projection is displayed constantly.
Note: Projection will not display constantly when operating on battery
power only.
Rotate Projection:
Press the ▲+button to rotate the projection image 90 degrees.
Press the ▲+button again to rotate another 90 degrees.
Continue until the projected image is right side up.
Projection Arm: The projection arm will move forward or backward
so you can project on the wall or ceiling.
USB CHARGE PORT
Charge a smart phone, camera or other devices when the clock is
plugged into a USB outlet with the Micro-USB cord.
Note: This is a power-output charging port. It does not supply power
to the clock.
Use the Micro-USB cord to connect the clock to a USB power
outlet (not included) or your computer.
Note: You cannot charge mobile devices when operating the clock on
battery power only.
Connect your mobile device’s USB charging cable (not included)
to the USB charging port.
Charging times will vary.
USB Power Output: 1.0A maximum current. Charge 1.0A devices
or devices that are self-regulating.
Note: Most USB cables included with mobile devices will work for
charging. Some USB cables sold with a mobile device, are for data
transfer only and cannot be used for charging. Make sure that the
USB cable you use will charge your mobile device.

Model: WT525 www.lacrossetechnology.fr Page | 5
CARE AND MAINTENANCE
Do not mix old and new batteries
Do not mix Alkaline, Standard, Lithium or Rechargeable
Batteries
Always purchase the correct size and grade of battery most
suitable for the intended use.
Replace all batteries of a set at the same time.
Clean the battery contacts and also those of the device prior to
battery installation.
Ensure the batteries are installed correctly with regard to polarity
(+and -).
Remove batteries from equipment when is not to be used for an
extended period of time.
Remove used batteries promptly.
Do not expose to extreme temperature, vibration or shock.
Clean with a soft damp cloth. Do not use solvents or scouring
agents.
The product is not a toy. Keep it out of reach of children.
The product is not to be used for medical purpose or for public
information. It is intended for home use only.
The specs of this product may change without prior notice.
Improper use or unauthorized opening of housing voids warranty.
If the product is not working properly, change the batteries.
SPECIFICATIONS
USB Charging Port
USB Output:
1.0 Amp maximum current
Power:
USB/Micro-USB cable
Micro-USB to USB outlet (included)
USB outlet or plug (not included)
Batteries
2-AAA, IEC, LR3 batteries
(not included)
Battery Life:
Projection Alarm
Battery life is over 12months with reputable
battery brands.
Dimensions:
Projection Alarm Open:
Closed
4.5” L x 3” W x 3” H
(114.3 x 76.2 x 76.2 mm)
4.5”L x 0.94” W x 3”H
(114.3 x 24 x 76.2mm)

Model: WT525 www.lacrossetechnology.fr Page | 6
LIABILITY DISCLAIMER
The electrical and electronic wastes contain hazardous substances.
Disposal of electronic waste in wild country and/or in unauthorized
grounds strongly damages the environment.
Please contact your local or/and regional authorities to retrieve the
addresses of legal dumping grounds with selective collection.
All electronic instruments must from now on be recycled. User shall
take an active part in the reuse, recycling and recovery of the
electrical and electronic waste.
The unrestricted disposal of electronic waste may do harm on
public health and the quality of environment.
As stated on the gift box and labeled on the product, reading the
“User manual” is highly recommended for the benefit of the user.
This product must however not be thrown in general rubbish
collection points.
The manufacturer and supplier cannot accept any responsibility for
any incorrect readings and any consequences that occur should an
inaccurate reading take place.
This product is designed for use in the home only as indication of
the temperature.
This product is not to be used for medical purposes or for public
information.
The specifications of this product may change without prior notice.
This product is not a toy. Keep out of the reach of children.
No part of this manual may be reproduced without written
authorization of the manufacturer.
R&TTE Directive 1999/5/EC
Summary of the Declaration of Conformity : We hereby declare that
this wireless transmission device does comply with the essential
requirements of R&TTE Directive 1999/5/EC.