La Crosse 404-4070 User manual

1 | Page
27.5” Decorative
Analog Wall Clock
Model: 404-4070
DC: 022817

2 | Page
Get Started
1. Insert 1 AA battery into the movement in the
center of the clock.
2. Spin the time set wheel to set the time.
3. Mount on the wall and enjoy your clock.
Note: The quartz movement will keep the clock
running accurately. If the clock does not operate, or
steadily loses time, replace the battery.
Position Clock
Mount the clock on a wall with the hanging hole on
the back of the clock.
Time Set
Wheel
Battery
Compartment

3 | Page
Specifications
Battery Requirements: 1 AA (IEC LR6) required in
movement (Alkaline recommended)
Battery life: 1 battery; over 12 months
Visit Us on Social Media
http://bit.ly/LaxTech_YouTube
http://bit.ly/LaxTech_Facebook
http://bit.ly/LaxTech__Twitter
http://bit.ly/LaxTech_Pinterest

4 | Page
Care and Maintenance
•Always purchase the correct size and grade of battery
most suitable for intended use.
•Clean the battery contacts and also those of the device
prior to battery installation.
•Ensure the battery is installed with correct polarity
(+ and -).
•Remove battery from equipment that is not to be used
for an extended period of time.
•Promptly remove expired battery.
Limited Warranty Information
La Crosse McCormick, LLC. provides a 2-year limited
warranty (from the date of the original consumer
purchase), on this product against manufacturing defects
in materials and workmanship. Send $5.00 with date and
proof of purchase to the following address. Please include
the model number of your product and your complete
address and phone number.
La Crosse McCormick, Warranty Department, 2830 S.
26th St., La Crosse, WI 54601
www.lacrossetechnology.com/support
Made in China – Printed in China