Lacava 5050S User manual

LACAVA LLC ® Page 1 of 9
LACAVA ®
Owner’s Manual
Important: Keep this manual for future technical assistance an /or replacement parts.
Please rea the instructions within the booklet carefully prior to installation. LACAVA
recommen s that this fixture be installe by a professional plumber an will not be hel
responsible for any amage cause by improper installation. It is the responsibility of the
homeowner to ensure that this fixture complies with all local plumbing co es. Please see
our Terms an Con itions foun in this booklet for a itional information. For technical
assistance please contact: 888-522-2823 (toll free).
Please reference this number:
Table of Contents
Page 2: Cleaning & Care Instructions
Page 3: Warranty
Page 4: Installation Instructions
Page 5: Pro uct Specifications
Page 8: Terms an Con itions
2243 S. Throop St.
Chicago, IL 60608
[email protected]
www.lacava.com
Twin Set Washbasins #5050S & #5050-42S
and Wall-mounting Brackets #TS0142 & #TS0152
PS#:

LACAVA LLC ® Page 2 of 9
Cleaning & Care Instructions
STAINLESS STEEL
Stainless steel is a very wear-resistant material. In order to achieve maximum corrosion resistance, the
surface of stainless steel must be kept clean. Provided that you follow a few simple steps, it will last a
lifetime in good condition.
• After each use, wash the sink with water and mild soap detergents rinse the surface with clean warm
water and dry the sink with a soft dry cloth.
• Do not leave liquids containing chlorine, rusty items, toilet cleaners, acids, concentrated disinfectants,
or strong alkalis in the sink for long periods because they may discolor the surface.
• AVOID using coarse abrasive materials such as scouring pads, wire wool, etc. which scratch the
surface of polished stainless steel.
NEVER let strong acids come into contact with stainless steel.
Other Metals (like faucets, chrome brackets, etc.). Use pure water for regular care. If the parts are
heavily congested, dissolve a couple of drops of dish soap in a small amount of water for cleaning. Do not
use abrasive agents - they will cause scratches. For best results, rub the surface with a soft cloth until dry.
GLASS
To prevent the formation of deposits, rinse and dry the glass after each use. To remove permanent water
stains, apply any glass cleaning aids and detergents available and/or baking soda(apply directly with a soft
cloth and a couple drops of water), like the ones used to clean shower doors, rinse the surface with clean
water, and dry with soft dry cloth. DO NOT use coarse abrasive materials or sharp objects which may
scratch the surface and leave marks on the glass.
WOOD
Clean the surface with soft cloth using only cleaning agents designated for wood care. To preserve and
restore the natural beauty of wood, apply paste wax with a soft cloth once a week and polish the surface
until wax evenly spread. NEVER use course abrasive materials which will scratch and discolor the surface,
and avoid oily agents that can engage in chemical reactions with lacquered surface. Extensive use of water
may also discolor and damage the wood surface, so wiping the wood surface dry after each use is highly
recommended.
MARBLE
Marble stone should be treated with marble sealer (we recommend Stoneguard Sealer) at least once a
week to prevent staining. Please follow the sealer manufacturer’s instructions to assure the best results.
VITREOUS CHINA
Vitreous china can be cleaned with a range of cleaning agents designated for bathroom maintenance: only
strong acids and abrasive agents should be avoided in order to prevent discoloration and scratches in the
glazed surface. Wash with detergent and warm water and rinse. Black marks in the glaze created by contact
with metal elements can be removed with very fine steel wool. The marks should be damped with water or
glass cleaner and rubbed with steel wool until it is removed (this may take longer than a couple of minutes).
Lime deposits may be removed by a solution of vinegar and water. Bathroom fixtures should be disinfected
weekly with a solution of chlorine bleach and water or a spray-on disinfectant or by using disinfectant cleaning
foam. Rust stains can be removed by using commercial rust remover or by using a solution of 1 tablespoon
oxalic acid crystals (poison), dissolved in ½ cup warm water. Apply to stain, allowing to stand a few minutes,
and then rinse well.
ACR LIC & SOLID SURFACE
Acrylic and solid surface is non-porous so liquids cannot penetrate it. Use water with dish soap or an
ammonia-based cleanser (such as glass cleanser).Wipe away water stains with a damp cloth and sponge and
dry with a towel. Occasionally wipe sinks and bowls with diluted household bleach (1/1 water/bleach solution)
to disinfect. Surfaces exposed to acetone-based polish removers and paint removers should be promptly
flushed with water. To remove stains, use Soft Scrub(r) diluted bleach and a sponge to rub in circular motion.
If the area is dull in contrast with the surrounding surface, use a white polishing compound with a sponge to
get a higher gloss. To remover cuts and scratches, sand with 400-grit (30 micron) or 600-grit (20 micron)
sandpaper buff with polishing pad at a low speed (1,500 - 2,000 rpm) polisher equipped with a wool pad
finish with wax.

LACAVA LLC ® Page 3 of 9
Warranty
Lacava oes not make any warranties, expresse or implie , except for warranty that
our pro uct be free from manufacturing efects in material an workmanship for a
perio of one year from the ate of purchase. If a pro uct is etermine to be efective
when still un er warranty, Lacava will repair or replace the pro uct (whichever cost is
smaller to Lacava) at its own expense (exclu ing shipping an installation charges). The
warranty oes not cover the normal wear an tear, amages ue to negligence,
improper installation, alterations, improper repairs, improper use, improper maintenance,
or amages ue to uses of the pro uct other than its inten e an normal use. In
accor ance with the laws of limitation an exclusion state by state, an therefore
provi e the uly exceptions, Lacava will not be hel liable, in any event, for any
special, in irect, inci ental or consequential amages or losses (inclu ing but not limite
to amages for loss of business, loss of profits, etc.) for breach of contract, tort (inclu ing
negligence), pro uct liability or otherwise, even if it has been a vise of the possibility of
such amages. LACAVA’s liability on any claim (inclu ing negligence) will not in any
case excee the contract price pai by the original purchaser for the pro uct claime
efective or unsuitable.
Important Information:
Failure to fully comply with these installation instructions will voi your warranty LACAVA
LLC is not responsible for any amages resulting form non-compliance with these
instructions. Furthermore it is the responsibility of the installer to ensure that this pro uct
complies with all local plumbing co es
Warranty Conditions:
1. LACAVA Subjects all its pro ucts to quality controls an guarantees them against
manufacturing efects. The guarantee covers the free elimination of all faults, as
ju ge by LACAVA, by repair an /or replacement of the pro uct or parts of it.
The guarantee covers all countries in which the pro uct is supplie by LACAVA.
2. LACAVA guarantees its pro ucts for a perio of:
• 5 years against fusion an porosity faults
• 5 years against cartri ge or bolts faults
• 5 years for chrome-plating efects
• 1 year for faults with all other finishes (woo )
• 1 year for washer or o-rings faults
3. The warranty is acknowle ge exclusively if proof of purchase is available in the
form of a receipt or invoice bearing the ate of purchase an the name of the
ealer bought from.
4. Faulty material must be returne to our facility together with proof or purchase
an RGA sheet.
5. For the pro ucts which have not been installe , the warranty will only be
acknowle ge if the returne to LACAVA in the original packaging, along with
proof of purchase an RGA sheet.
6. The warranty oes not cover amages ue to :
• Failure to observe the instructions in this installation booklet an ; therefore
incorrect installation , improper use , incorrect maintenance
• Transport an han ling
• Wear of parts (valves, membranes, etc…)
• Tampering or repairs carrie out by anyone other that those authorize by
LACAVA, an the use of non-original LACAVA spare parts
• Frost an foreign bo ies insi e the pipes
7. The warranty oes not cover assembly or isassembly of the pro uct, transfers
an technical intervention by authorize personnel.

LACAVA LLC ® Page 4 of 9
Installation Instructions
1. In or er to provi e proper support for wall-mounting a sink, it's usually necessary
to remove a small section of rywall so you can access the wall stu s an attach
blocking between them.
2. Base on the esire mounting height, eci e where support will be nee e .
Then remove the rywall in that area an install 2-by-6 or 2-by-8 blocking
between the wall stu s. Then using 3 1/2” galvanize common nails, toenail the
blocking to the stu s an repair the rywall.
3. If for some reason the stu s cannot be use , then ¾” plywoo behin the wall
can also provi e the necessary support.
4. Measure an rill four pilot holes in the reinforce wall for the anchors. Insert
anchors an secure bracket A to the wall with provi e mounting bolts. Double
check to make sure that bracket A is completely level on the wall.
5. Mount bracket B (with open en facing own) to the washbasin by following the
sequence shown above: 1 ¾” Bolt (1), small metal washer (2), steel bracket B (3),
white plastic sleeve (4), Twin Set washbasin mounting hole (5), clear plastic
washer (6), large steel washer (7), an locking nut (8).
6. Fix steel brackets A & B together on the si e of the brackets using one of the 1”
bolts in each of the four holes.

LACAVA LLC ® Page 5 of 9
Product Specifications
#5050S:
Note:
Drawings provi e herein are meant to give the user an i ea of the pro uct an are not ma e to
scale. The sizes in inches are roun e up to the nearest 1/16.

LACAVA LLC ® Page 6 of 9
Product Specifications
#5050- 2S:
Note:
Drawings provi e herein are meant to give the user an i ea of the pro uct an are not
ma e to scale. The sizes in inches are roun e up to the nearest 1/16.

LACAVA LLC ® Page 7 of 9
Product Specifications
#TS01 2:
#TS0152:
Note:
Drawings provi e herein are meant to give the user an i ea of the pro uct an are not ma e to
scale. The sizes in inches are roun e up to the nearest 1/16.

LACAVA LLC ® Page 8 of 9
Terms and Conditions
UNIQUENESS
Many pro ucts are ma e of natural stone, woo s, or metals. Because of the natural
variations, an /or han ma e nature of the pro ucts, slight ifferences are expecte
an are not eeme manufacturing efects.
SHIPPING POLICIES
Once the merchan ise is release to an accepte by the carrier, LACAVA’s
responsibility en s. LACAVA LLC is not responsible for amages occurring in transit. After
the merchan ise is elivere an the shipping ocument is signe , it becomes the
property of the purchaser. We constantly improve the packaging as new technologies
become available, but amages in transit may still occur. Therefore, we recommen
that all packages be inspecte by the purchaser in the carrier’s presence upon elivery.
In case of amages, either visible or conceale , the purchaser is responsible for filing any
amage claim against the carrier. In this regretful circumstance, we suggest you be very
conservative an have the carrier’s agent explain the steps to submit a vali claim
against the carrier (as each carrier has ifferent claim policies). Please ocument
everything in writing, preferably on the shipping ocuments an have also the carrier’s
agent sign along. If you wish for us to assist you in the claim process, please fax us copies
of the shipping an claim ocuments at your earliest convenience. In the case of missing
items, since we on’t know whether it is ue our mistake or a theft uring transit, please
follow same process as above for shipping amages, with the only ifference being that
the claim will be about something completely missing, rather than amage . Please
take note, in the presence of the carrier’s agent, any visible tampering with the
packaging. In case of missing items, you also have to inform LACAVA an sen to
LACAVA all relate ocuments within 24 hours from the elivery ate. We will open an
internal investigation an check the inventory count to etermine if it was an error on our
part. If we realize it was our mistake, we will promptly ship the missing item(s) to the
purchaser by stan ar groun at our cost.
RETURN POLICIES
LACAVA will replace any pro uct non-conforming with or ere pro uct ue to
pro uction efects only after the non-conforming pro uct is returne to LACAVA’s
warehouse in salable con ition within 30 (thirty) ays from the shipping ate. In any case,
LACAVA oes not cover installation costs. If the pro uct is not satisfactory for any reason
ifferent from efects, it can be returne to LACAVA LLC up to 30 (thirty) ays from the
shipping ate after obtaining a Return Goo s Authorization (RGA) vali for 60 (sixty)
ays. If the pro uct is not returne to LACAVA within that timeframe, the RGA will be
voi e an no further RGAs will be issue for the pro uct. The merchan ise must be in its
original packaging an packe safely. A restocking fee of 25 percent an applicable
shipping charges to the customer an back will be e ucte from the cre it amount.
Cre it (exclu ing shipping an han ling charges) will be given only for returns of intact
pro ucts up to 30 ays from the shipping ate. After 30 ays from the shipping ate, no
returns will be accepte . All returne merchan ise is at the purchaser’s risk an cost.
Special or er an custom ma e items are not returnable. Pro ucts must be inspecte
prior to installation an installation of the pro uct means its acceptance. Pro uct, once
installe , cannot be returne . Damages occurring in installation are not consi ere
efects an are not subject to return or refun .

LACAVA LLC ® Page 9 of 9
Notes