LaCie FireWire 800 ExpressCard 34 User manual

FireWire 800 ExpressCard 34
Quick Install Guide

1. Insert the controller card into an empty
ExpressCard 34 or 54 slot.
The LaCie FireWire 800 ExpressCard 34 is plug & play and driver-free for
Windows and Mac OS.
2. Use FireWire 800 cables to connect your FireWire 800 devices.
NOTE: Windows users – if your system does not contain the necessary
drivers for the controller card, you can install the drivers from the included
Drivers & Utilities CD-ROM.
Installation
Protect your investment – register for free technical support: www.lacie.com/register

If you experience problems with your LaCie FireWire 800 ExpressCard 34:
1. Make sure you have installed the driver for the controller card
according to the installation procedure, above.
2. If an older version driver is installed previously, uninstall the old driver
and install the included driver according to the procedure, above.
3. If a driver for a similar product is installed, uninstall the similar driver
and install the included driver according to the procedure, above.
4. If none of the above issues are present, or if the driver has been
installed properly and the controller card is still not functioning, the
controller card may be defective. Please contact LaCie Customer
Support.
Troubleshooting