
2/2
Quartz MoveMent | Quarz uhrwerk
MIYOTA 2115
INSTRUCTION MANUAL
settinG the tiMe
1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute
hands.
3. When the crown is pushed back to the nor-
mal position,
the second hand begins to run.
settinG the date
1. Pull the crown out to the 1st position.
2. Turn the crown counter-clockwise to set the
date. *If the date is set between the hours of
around 9 PM and 1 AM, the date may not
change the following day.
3. After the date has been set, push the crown
back to the normal position.
GEBRAUCHSANLEITUNG
zeit einsteLLen
1. Krone auf Position 2 ziehen.
2. Krone drehen um den
Stunden- und Minutenzeiger
einzustellen.
3. Krone wieder auf Normalposition
stellen; Sekundenzeiger
bewegt sich wieder.
datuM einsteLLen
1. Krone auf Position 1 ziehen.
2. Krone gegen den Uhrzeigersinn drehen, um
das Datum einzustellen.
*Datum nicht zwischen 21.00 Uhr und 03.00
Uhr einstellen, sonst könnte es Probleme bei
der Datumsumstellung geben.
3. Nachdem das Datum eingestellt wurde,
Krone wieder in die Normalposition bringen.