
2/2
Quartz MoveMent | Quarz uhrwerk
MIYOTA 2350
INSTRUCTION MANUAL
settinG the tiMe
1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hand
3. Push the crown back into the
normal position.
settinG the date
1. Pull the crown out to the 1st position.
2. Turn the crown clockwise for date setting.
*Do not set the date between 9 PM and 1 AM,
otherwise the day of the week may not
change on the following day.
3. Push the crown back into the
normal position.
settinG the date of the week
1. Push the crown out to the 1st position.
2. Turn the crown clockwise to set
the day of the week.
*Do not set the date between 9 PM and 1 AM,
otherwise the day of the week may not
change on the following day.
3. After the day of the week has been set,
push the crown back to the normal position.
GEBRAUCHSANLEITUNG
zeit einsteLLen
1. Krone auf Position 2 ziehen.
2. Krone drehen um den
Stunden- und Minutenzeiger
einzustellen.
3. Krone wieder auf die Normalposition
stellen.
datuM einsteLLen
1. Krone auf Position 1 ziehen.
2. Krone im Uhrzeigersinn drehen um das
Datum einzustellen.
*Datum nicht zwischen 21.00 Uhr und 03.00
Uhr einstellen, sonst könne es Probleme bei
der Datumsumstellung geben.
3. Krone wieder zurück in Normalposition
stellen.
wochentaG einsteLLen
1. Krone auf Position 1 ziehen.
2. Krone im Uhrzeigersinn drehen um das
Datum einzustellen.
*Datum nicht zwischen 21.00 Uhr und 03.00
Uhr einstellen, sonst könne es Probleme bei
der Datumsumstellung geben.
3. Krone wieder zurück in Normalposition
stellen.