
2/2
Quartz MoveMent | Quarz uhrwerk
SEIKO VK64
INSTRUCTION MANUAL
settinG the tiMe
1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hand
3. Push the crown back into the
normal position.
settinG the date
1. Pull the crown out to the 1st position.
2. Turn the crown clockwise for date setting.
*Do not set the date between 9 PM and 3 AM,
otherwise the day may not change
properly.
3. Push the crown back into the
normal position.
chronoGraph
Button A: Start and Stop
Button B: Reset
settinG chronoGraph to 0
Setting the Chronographen to 0, in case the
hand position is not correct:
Pull the crown out to the 2nd position and
press button A to set the hand clockwise, or
Button B to set it counter-clockwise.
GEBRAUCHSANLEITUNG
zeit einsteLLen
1. Krone auf Position 2 ziehen.
2. Krone drehen um den
Stunden- und Minutenzeiger
einzustellen.
3. Krone wieder auf die Normalposition
stellen.
datuM einsteLLen
1. Krone auf Position 1 ziehen.
2. Krone im Uhrzeigersinn drehen um das
Datum einzustellen.
*Datum nicht zwischen 21.00 Uhr und 03.00
Uhr einstellen, sonst könne es Probleme bei
der Datumsumstellung geben.
3. Krone wieder zurück in Normalposition
stellen.
chronoGraph
Knopf A: Start und Stop
Knopf B: Zurücksetzen
nuLLsteLLunG des chronoGraphen
Nullstellung des Chronographen, sollte dieser
verstellt sein:
Krone auf Position 2 ziehen und den Knopf A,
um den Zeiger im Uhrzeigersinn einzustellen,
oder Knopf B gegen den Uhrzeigersinn.