
2/2
Quartz MoveMent | Quarz uhrwerk
RONDA 505.24H
INSTRUCTION MANUAL
settinG the tiMe
1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour hand.
3. Push the crown back to
the normal position.
settinG the date
1. Pull the crown out to the 1st position.
2. Turn the crown clockwise to set the date. *If
the date is set between the hours of around 9
PM and 1 AM, the date may not change the
following day.
3. After the date has been set, push the crown
back to the normal position.
Quick fix: 24 hour dispLay
1. Pull crown to 1st Position (Watch still works)
2. Turn the crown counter-clockwise until you
get the right time.
3. Push crown back to normal position.
GEBRAUCHSANLEITUNG
zeit einsteLLen
1. Krone auf Position 2 ziehen.
2. Krone drehen um den
Stundenzeiger einzustellen.
3. Krone wieder auf Normalposition
stellen.
datuM einsteLLen
1. Krone auf Position 1 ziehen.
2. Krone im Uhrzeigersinn drehen, um das
Datum einzustellen.
*Datum nicht zwischen 21.00 Uhr und 03.00
Uhr einstellen, sonst könnte es Probleme bei
der Datumsumstellung geben.
3. Nachdem das Datum eingestellt wurde,
Krone wieder in die Normalposition bringen.
schneLLkorrektur der 24 stunden anzeiGe
1. Krone in Position 1 bringen
(Uhr läuft weiter)
2. Krone gegen den Uhrzeigersinn drehen, bis
die gewünschte Zeit angezeigt wird.
3. Krone zurück in Normal-Position.