Lake Shore JJ906 User manual

5. Attach the back, securing it with 8 short screws.
That’sit! Your dollhouse is ready to welcome a new doll family.
6. Turn the dollhouse upright and carefully set the roof in place,
aligning the pegs and holes. Secure the roof with 4 long screws
and 1 shortscrew.
short
screws
long screws
long
screws
short
screw
Lakeshore Giant
Classic Dollhouse
This spacious dollhouse has lots of realistic details and plenty of room
for one or more children to play. Assembly is simple—just follow the
directions in this guide. We’ve provided all the hardware and parts, so
all you’ll need is a Phillips screwdriver.
What’s Included
©2006 Lakeshore JJ906
[phone] Ages 3+
www.lakeshorelearning.com Printed in China
This product contains hardware that, before
assembly, can pose a choking hazard to children
under the age of 3 years. Care should be taken
when unpacking and assembling this product.
Adult assembly required.
base
center floor
back
sides (2)
stairs
small walls (2)
medium screws (4)
short screws (14 )
roof
glue (not shown)
long screws (4)

3
4. Put a drop of glue into each of the 4 holes in the floor. Position the
small walls as shown, aligning the pegs and the holes. (The green
sides of the walls should face each other.) Push the walls into place.
3. Position the center floor so that the holes align with the pegs on
the stairs and sides. Push the floor into place and secure with 3
short screws.
2
1. Put a drop of glue into each of
the two center holes of the base.
Fit the pegs of the stairs section
into the holes, making sure the
back of the stairs is at the rear of
the house. Use 2 short screws to
fasten the pieces together.
2. Attach the sides to the base,
using 4 medium screws. (Be
sure to position the sides
with the countersunk holes
facing out and the pilot
holes at the rear.)
short
screws
rear of house
medium
screws
pilot holes
on this edge
countersunk
holes face out short
screws

3
4. Put a drop of glue into each of the 4 holes in the floor. Position the
small walls as shown, aligning the pegs and the holes. (The green
sides of the walls should face each other.) Push the walls into place.
3. Position the center floor so that the holes align with the pegs on
the stairs and sides. Push the floor into place and secure with 3
short screws.
2
1. Put a drop of glue into each of
the two center holes of the base.
Fit the pegs of the stairs section
into the holes, making sure the
back of the stairs is at the rear of
the house. Use 2 short screws to
fasten the pieces together.
2. Attach the sides to the base,
using 4 medium screws. (Be
sure to position the sides
with the countersunk holes
facing out and the pilot
holes at the rear.)
short
screws
rear of house
medium
screws
pilot holes
on this edge
countersunk
holes face out short
screws

5. Attach the back, securing it with 8 short screws.
That’sit! Your dollhouse is ready to welcome a new doll family.
6. Turn the dollhouse upright and carefully set the roof in place,
aligning the pegs and holes. Secure the roof with 4 long screws
and 1 shortscrew.
short
screws
long screws
long
screws
short
screw
Lakeshore Giant
Classic Dollhouse
This spacious dollhouse has lots of realistic details and plenty of room
for one or more children to play. Assembly is simple—just follow the
directions in this guide. We’ve provided all the hardware and parts, so
all you’ll need is a Phillips screwdriver.
What’s Included
©2006 Lakeshore JJ906
[phone] Ages 3+
www.lakeshorelearning.com Printed in China
This product contains hardware that, before
assembly, can pose a choking hazard to children
under the age of 3 years. Care should be taken
when unpacking and assembling this product.
Adult assembly required.
base
center floor
back
sides (2)
stairs
small walls (2)
medium screws (4)
short screws (14 )
roof
glue (not shown)
long screws (4)