Lake Shore Market DD491 User manual

Lakeshore Market
Your sturdy new hardwood market will be ready for business in no
time—simply follow the instructions in this guide to assemble and
attach the roof. You’ll need a Phillips screwdriver and a standard
screwdriver. All other tools and hardware are provided for you.
What’s Included
• Market stand • 3 baskets • Cloth canopy
• 2 large posts • 2 roof panels • 7 dowels
• 2 barrel nuts • 2 bolts • 18 screws
• Allen wrench
Assembly Instructions
©2007 Lakeshore
[phone]
www.lakeshorelearning.com DD491
• Slide a barrel nut all the way into the
hole in the side of a large post. Use a
regular screwdriver to turn the nut so
that the slot is vertical.
1. Attach two large posts to the stand.
• Set the post on top of the market stand,
making sure the notch at the top is facing
out. Insert a bolt from below and tighten it
with the Allen wrench. Repeat for the other
large post.
(continued on back)

That’s it! Your market is ready for business, so bring on the shoppers!
2. Assemble the roof.
• Fit 7 dowels into the recessed holes of one of the roof panels.
Secure each dowel with a screw. Tighten the screws with a Phillips
screwdriver.
• Attach the other roof panel with 7 more screws.
3. Attach the roof to the posts.
• Fit the roof panels into the notches at the
tops of the large posts. Use 2 screws and
a Phillips screwdriver to secure each side.
4. Finish your market.
• Slide the cloth canopy over
the roof framework. Place the
baskets on the tilted display
shelf. Fill the baskets and
shelves with whatever goodies
children want to sell.