LaMetric Elf's crown User manual

Installation guide for
Elf's crown
Total surfaces:
2
Width:
16.14 in
Height:
8.27 in

Installation Guide
1. Mount
Once you decide on a design in the shape
catalog, mount it on the wall:
Take a water level, pencil and roulette
and make the marks on the wall in
order to be able evenly attach the
cable splitters
Clean the surface thoroughly using
rubbing alcohol or water and let it dry
Attach three double-sided tapes to
the rear side of each cable splitter
Attach every cable splitter to the wall
When placing cable splitter on the
wall, press and hold for 30 seconds
For wood texture and wallpapers, it’s
recommended to use a screw mount
(screws are not included).
2 / 5

Installation Guide
2. Connect
Connect the cable splitters with
cables like it is shown in the picture
above
Connect the power cable to one of
the free ports of any cable splitter
Plug the SKY in
Make sure that the light indicator on
each cable splitter emits a green light
Unplug the SKY
3 / 5

Installation Guide
3. Cover up
Cover up cable splitters with light
surfaces
Plug the SKY in
You did a great job!
4 / 5

Installation Guide
4. Setup
Setup your SKY via the LaMetric iPhone or
Android smartphone app to:
Use your smartphone as a remote
Control brightness and schedule
on/off settings
Enjoy vibrant effects or informational
apps
Enable voice control via Amazon
Alexa or Google Assistant
Utilize one-button control and
automatic brightness adjustment in
combination with LaMetric TIME
Create an ambient atmosphere in
sync with the screen of your
computer
Connect to Homey, IFTTT, Razer
Chroma, or Home Assistant
If you need any help during the installation procces, don't
hesitate to contact our Support Team at [e-mail]
5 / 5