Land Pride Powered Rakes PR1672 User manual

Table of Contents
Cover photo may show optional equipment
not supplied with standard unit.
Read the Operator’s manual entirely. When you
see this symbol, the subsequent instructions and
warnings are serious - follow without exception.
Your life and the lives of others depend on it!
!
© Copyright 2012 Printed
24503
314-216M
PR1660, PR1672 & PR1690
Powered Rakes
Operator’s Manual
3/27/12

Table of Contents
PR1660, PR1672 & PR1690 Powered Rakes 314-216M 3/27/12
©Copyright 2012 All rights Reserved
Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparationofthismanual,Land Prideassumes noresponsibilityforerrorsoromissions.Neitheris anyliabilityassumedfordamagesresultingfrom theuse
ofthe information containedherein. Land Pride reservesthe right toreviseand improveits productsas it sees fit.This publicationdescribesthestate of this
product at the time of its publication, and may not reflect the product in the future.
Land Pride is a registered trademark.
All other brands and product names are trademarks or registered trademarks of their respective holders.
Printed in the United States of America.
Important Safety Information . . . . . . . . . . . . . 1
Safety at All Times . . . . . . . . . . . . . . . . . . . . . . . . . 1
Look For The Safety Alert Symbol . . . . . . . . . . . . .1
Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Further Assistance . . . . . . . . . . . . . . . . . . . . . . . . 8
Section 1: Assembly and Set-Up . . . . . . . . . . 9
Tractor Requirements . . . . . . . . . . . . . . . . . . . . . . . 9
Hydraulic Option . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Tractor Hook-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Driveline Installation . . . . . . . . . . . . . . . . . . . . . . . 10
Check Driveline Collapsible Length . . . . . . . . . . 10
Shorten Driveline Length . . . . . . . . . . . . . . . . . . 10
Check Driveline Interference . . . . . . . . . . . . . . . 11
Section 2: Operating . . . . . . . . . . . . . . . . . . . 12
Operating Checklist . . . . . . . . . . . . . . . . . . . . . . . . 12
Transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . 12
General Operating Instructions . . . . . . . . . . . . . . . 13
Section 3: Adjustments . . . . . . . . . . . . . . . . . 14
Gauge Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Rake Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Material Control Deflector . . . . . . . . . . . . . . . . . . . 14
Drive Chain Adjustment . . . . . . . . . . . . . . . . . . . . . 15
End Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Section 4: Maintenance & Lubrication . . . . . 16
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Drive Chain Maintenance . . . . . . . . . . . . . . . . . . .16
Sprocket and Chain Replacement . . . . . . . . . . . . .16
Chain Case Skid Shoe Replacement . . . . . . . . . . .16
Slip Clutch Maintenance . . . . . . . . . . . . . . . . . . . .17
Type B Slip Clutch . . . . . . . . . . . . . . . . . . . . . . . . .17
Clutch Run-In . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Clutch Disassembly, Inspection & Assembly . . .17
Type A Slip Clutch . . . . . . . . . . . . . . . . . . . . . . . . .18
Clutch Run-In . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Clutch Disassembly, Inspection & Assembly . . .18
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Pivot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Gauge Wheel Spindle . . . . . . . . . . . . . . . . . . . . .20
Gauge Wheel Axle . . . . . . . . . . . . . . . . . . . . . . .20
Drive Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Non-Drive Bearing . . . . . . . . . . . . . . . . . . . . . . .21
Gearbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Driveline U-Joints . . . . . . . . . . . . . . . . . . . . . . . .22
Driveline Inner Tube Bearings . . . . . . . . . . . . . .22
Driveline Profiles . . . . . . . . . . . . . . . . . . . . . . . .22
Section 5: Specifications & Capacities . . . . . 23
Section 6: Features & Benefits . . . . . . . . . . . 24
Section 7: Troubleshooting . . . . . . . . . . . . . . 25
Section 8: Torque & Tire Inflation Charts . . . 26
Section 9: Warranty . . . . . . . . . . . . . . . . . . . . 27
Table of Contents

1
Important Safety Information
3/27/12 PR1660, PR1672 & PR1690 Powered Rakes 314-216M
Table of Contents
Important Safety Information
▲
These are common practices that may or may not be applicable to the products described in
this manual.
Safety at All Times
Thoroughly read and understand
the instructions given in this
manual before operation. Refer to
the “Safety Label” section, read
all instructions noted on them.
Do not allow anyone to operate
this equipment who has not fully
read and comprehended this
manual and who has not been
properly trained in the safe
operation of the equipment.
▲Operator should be familiar with
all functions of the unit.
▲Operate implement from the
driver’s seat only.
▲Make sure all guards and shields
are in place and secured before
operating implement.
▲Do not leave tractor or implement
unattended with engine running.
▲Dismounting from a moving
tractor could cause serious injury
or death.
▲Do not allow anyone to stand
between the tractor and
implement while backing up to the
implement.
▲Keep hands, feet, and clothing
away from power-driven parts.
▲Wear snug fitting clothing to avoid
entanglement with moving parts.
▲Watch out for wires, trees, etc.,
when raising implement. Make
sure all persons are clear of
working area.
▲Turning tractor too tight may
cause implement to ride up on
wheels. This could result in injury
or equipment damage.
▲Do not carry passengers on
implement at any time.
Look For The Safety Alert Symbol
The SAFETY ALERT SYMBOL indicates there is a
potential hazard to personal safety involved and extra
safety precaution must be taken. When you see this
symbol, be alert and carefully read the message that
follows it. In addition to design and configuration of
equipment, hazard control and accident prevention
are dependent upon the awareness, concern,
prudence and proper training of personnel involved in
the operation, transport, maintenance and storage of
equipment.
!
Be Aware of
Signal Words
A Signal word designates a degree or
level of hazard seriousness. The
signal words are:
Indicates an imminently hazardous
situation which, if not avoided, will
result in death or serious injury. This
signal word is limited to the most
extreme situations, typically for
machine components that, for
functional purposes, cannot be
guarded.
!DANGER
Indicates a potentially hazardous
situation which, if not avoided, could
result in death or serious injury, and
includes hazards that are exposed
when guards are removed. It may also
be used to alert against unsafe
practices.
Indicates a potentially hazardous
situation which, if not avoided, may
result in minor or moderate injury. It
may also be used to alert against
unsafe practices.
!WARNING
!CAUTION
For Your Protection
▲Thoroughly read and understand
the “Safety Label” section, read all
instructions noted on them.
Shutdown and Storage
▲Lower machine to ground, put
tractor in park, turn off engine, and
remove the key.
▲Detach and store implements in a
area where children normally do
not play. Secure implement by
using blocks and supports.
OFF
REMOVE
Parts Manual QR Locator
The QR (Quick Reference) code on the front
cover and to the left will take you to the
Parts Manual for this equipment. Download
the appropriate App on your smart phone,
open the App, point your phone on the QR
code and take a picture.
Dealer QR Locator
The QR code on the left will
link you to available dealers
for Land Pride products.
Refer to Parts Manual
QR Locator on this page for
detailed instructions.

2
Important Safety Information
PR1660, PR1672 & PR1690 Powered Rakes 314-216M 3/27/12
Table of Contents
Transport
Machinery Safely
▲Comply with state and local laws.
▲Maximum transport speed for
implement is 20 mph. DO NOT
EXCEED. Never travel at a speed
which does not allow adequate
control of steering and stopping.
Some rough terrain require a
slower speed.
▲Sudden braking can cause a
towed load to swerve and upset.
Reduce speed if towed load is not
equipped with brakes.
▲Use the following maximum
speed - tow load weight ratios as
a guideline:
20 mph when weight is less
than or equal to the weight of
tractor.
10 mph when weight is double
the weight of tractor.
▲IMPORTANT: Do not tow a load
that is more than double the
weight of tractor.
Use Safety
Lights and Devices
▲Slow moving tractors, self-
propelled equipment and towed
implements can create a hazard
whendrivenon publicroads.They
are difficult to see, especially at
night.
▲Flashing warning lights and turn
signals are recommended
whenever driving on public roads.
Practice Safe
Maintenance
▲Understand procedure before
doing work. Use proper tools and
equipment, refer to Operator’s
Manual for additional information.
▲Work in a clean dry area.
▲Lower the implement to the
ground, put tractor in park, turn off
engine and remove key before
performing maintenance.
▲Allow implement to cool
completely.
▲Do not grease or oil implement
while it is in operation.
▲Inspect all parts. Make sure parts
are in good condition & installed
properly.
▲Remove buildup of grease, oil or
debris.
▲Remove all tools and unused
parts from implement before
operation.
These are common practices that may or may not be applicable to the products described in
this manual.
Keep Riders
Off Machinery
▲Riders obstruct the operator’s
view, they could be struck by
foreign objects or thrown from the
machine.
▲Never allow children to operate
equipment.

3
Important Safety Information
3/27/12 PR1660, PR1672 & PR1690 Powered Rakes 314-216M
Table of Contents
Prepare for Emergencies
▲Be prepared if a fire starts.
▲Keep a first aid kit and fire
extinguisher handy.
▲Keep emergency numbers for
doctor, ambulance, hospital and
fire department near phone.
911
Wear
Protective Equipment
▲Wear protective clothing and
equipment appropriate for the job.
Avoid loose fitting clothing.
▲Prolonged exposure to loud noise
can cause hearing impairment or
hearing loss. Wear suitable
hearing protection such as
earmuffs or earplugs.
▲Operating equipment safely
requires the full attention of the
operator. Avoid wearing radio
headphones while operating
machinery.
Avoid High
Pressure Fluids Hazard
▲Escapingfluidunder pressure can
penetrate the skin causing
serious injury.
▲Avoid the hazard by relieving
pressure before disconnecting
hydraulic lines or performing work
on the system.
▲Make sure all hydraulic fluid
connections are tight and all
hydraulic hoses and lines are in
good condition before applying
pressure to the system.
▲Use a piece of paper or
cardboard, NOT BODY PARTS, to
check for suspected leaks.
▲Wear protective gloves and safety
glasses or goggles when working
with hydraulic systems.
▲If an accident occurs, see a
doctor immediately. Any fluid
injected into the skin must be
treated within a few hours or
gangrene may result.
These are common practices that may or may not be applicable to the products described in
this manual.
Tire Safety
▲Tire changing can be dangerous
and should be preformed by
trained personnel using the
correct tools and equipment.
▲When inflating tires, use a clip-on
chuck and extension hose long
enough to allow you to stand to
one side and NOT in front of or
over the tire assembly. Use a
safety cage if available.
▲When removing and installing
wheels, use wheel handling
equipment adequate for the
weight involved.

4
Important Safety Information
PR1660, PR1672 & PR1690 Powered Rakes 314-216M 3/27/12
Table of Contents
Safety Labels
Your Powered Rake comes equipped with all safety
labels in place. They were designed to help you safely
operateyourimplement.Read and followtheirdirections.
1. Keep all safety labels clean and legible.
2. Replace all damaged or missing labels. To order new
labels go to your nearest Land Pride dealer or visit our
dealer locator at landpride.com.
3. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4. Refer to this section for proper label placement.
To install new labels:
a. Clean the area the label is to be placed.
b. Spray soapy water on the surface where the label is to
be placed.
c. Peel backing from label. Press firmly onto the surface.
d. Squeeze out air bubbles with the edge of a credit card.
KEEP AWAY
818-254C
Danger: Rotating Roller Hazard
23504
23504
818-255C
Warning: General Safety

5
Important Safety Information
3/27/12 PR1660, PR1672 & PR1690 Powered Rakes 314-216M
Table of Contents
818-230C
Red Reflector
(PR1690 only)
21122
24504
24503
818-335C
Red Reflector
818-229C
Amber Reflector
(PR1690 only)

6
Important Safety Information
PR1660, PR1672 & PR1690 Powered Rakes 314-216M 3/27/12
Table of Contents
24504 818-552C
Danger: Rotating Driveline
ROTATING DRIVELINE
KEEP AWAY!
24503
838-111C
Danger: Moving Parts
818-130C
Caution: 540 RPM
24503

7
Important Safety Information
3/27/12 PR1660, PR1672 & PR1690 Powered Rakes 314-216M
Table of Contents
24503
ROTATING DRIVELINE
KEEP AWAY!
818-552C
Danger: Rotating Driveline
818-540C
Danger: Guard Missing
Located under driveline shields
24503
24504
838-094C
Warning: High Pressure Fluid
Hazard

8
Introduction
PR1660, PR1672 & PR1690 Powered Rakes 314-216M 3/27/12
Table of Contents
Introduction If customer service or repair parts are required contact a
LandPride dealer. A dealerhastrainedpersonnel,repair
parts and equipment needed to service the Powered
Rake.
The parts on your Powered Rake have been specially
designedandshouldonlybereplacedwithgenuineLand
Pride parts. Therefore, should your Powered Rake
require replacement parts go to your Land Pride Dealer.
Serial Number
Model No. _____________Serial No. _______________
For quick reference and prompt service, record model
number and serial number in the spaces provided above
and again on warranty page 27. Always provide model
number and serial number when ordering parts and in all
correspondences with your Land Pride dealer. Refer to
Figure 1 for location of your serial number plate.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Powered Rake. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may haveand that he has had the opportunity to
assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3. For further assistance write to:
Land Pride
Service Department
P.O. Box 5060
Salina, KS 67402-5060
E-mail address
lpser[email protected]
24504
Land Pride welcomes you to the growing family of new
product owners. This Powered Rake has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance and safe
operating practices will help you get years of satisfactory
use from the machine.
Application
The PR16 Series Powered Rakes are designed and built
by Land Pride to be multi-functional seedbed and soil
surface preparation tools for landscapers and turf care
professionals. They are capable of grading, leveling,
shaping, cultivating, renovating, and pulverizing various
types of soil surfaces. They also are capable of raking
and windrowing soil, rocks and construction site debris.
The 60"and 72" working widths are compatible with
25-40 HP Cat. I 540rpm PTO tractors while the
90" working width is compatible with 540 rpm PTO Cat. I
and II tractors 35-75 HP. This means that Land Pride
customers can choose models for either smaller “space
restricted” landscaping and turf renovation jobs or all out
“wide-area” renovation.
See “Specifications & Capacities” on page 23 and
“Features & Benefits” on page 24 for additional
information and performance enhancing options.
Using This Manual
•This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•To order a new Operator’s or Parts Manual contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge from our website at
www.landpride.com.
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
Owner Assistance
The Warranty Registration card should be filled out by
the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
IMPORTANT: A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE: A special point of information that the
operator should be aware of before continuing.