Land Pride Rear Blades RBT40108 User manual

21
Blades, Rear
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
RBT40 Series
RBT4084 RBT4096 RBT40108
Blade Width 84” 96” 108”
Approximate Weight (lbs.)
w/manual links 689 lbs. 739 lbs. 789 lbs.
Maximum Engine Horsepower 100 HP - 2 Wheel drive
Maximum G.V.W. (lbs.) 9500 lbs.
Hitch Type Cat. 1 & 2
Fits Land Pride Quick Hitch
Blade Angle
Manual Linkage:
Hydraulic Cylinder:
With blade facing forward or reversed
Up to 45oin 15oincrements clockwise and counterclockwise in either direction
Up to 45oclockwise and counterclockwise in either direction
Angle Cylinder 3 1/2” X 16” X 1 1/4”
Blade OffsetManual Linkage
Hydraulic Cylinder Up to 30 inches left and right in 15 positions (Center, 7 left and 7 right) Up to 30 inches left and right
Offset Cylinder 3 1/2” X 16” X 1 1/4”
Tilt AngleManual Ratchet Jack
Hydraulic Cylinder Maximum 15oup and 15odown with blade facing forward or reversed Maximum 15oup and 15odown with blade facing forward or reversed
Tilt Cylinder 3” X 6” X 1 1/4”
Moldboard Height 17”
Moldboard Thickness 5/16” reinforced, 1/4” tapered reinforcement channel
MoldBoard Kingpin 3”
Cutting Edge 1/2” x 6” Heat treated reversible blade
Main Frame Fully enclosed welded, formed box
Parking Stand Retractable
Accessories Skid Shoes, End Plates, Hydraulic Selector Valve and Hydraulic Cushion Valve
301-206S 6/10/10
26810
Top View Side View