LANSING LIGHTING TY10D User manual

Shanghai Lansing Electronics Co., Ltd Tel : [phone] Fax：[phone] Web：www.lansinglight.com E-mail：[e-mail]
Add: No 609, Tahui Rd, Shihudang Town, Songjiang Dist Shanghai, China, 201612
All rights reserved by Lansing,without the written authorization of the Lansing, any part thereof shall not be reproduced or transmitted in any form.
TY10D LED Dual Low Intensity Solar
Powered Obstruction Light (Type A)
1/71 /7
Descriptions:
Based on LANSING TY10, TY10D is a “twin”model which can be working synchronization.
An internal solar panel comes with each single light of TY10D, provides power supply to the
light, which makes TY10D a self-contained and care-free light unit. Also, with the solar
function, the light is easy to deploy to almost any condition and any emergency case. Robust
body built and surface coating provides good protection against hash environments.
Features& Benefits:
• High quality optics for excellent beam spread control
• Ultra-light LEDs, energy saving
• Self-contained without outside power supply
• Maximum visibility distance 3.6 KM
• Once fully charged, it can work for up to 200 hours
• Auto-off after being packed for 18 hours
• All hardware of obstruction lights are made of corrosion resistant metals.
• Bird spikes for protection against droppings.
• Use of quality components and sophisticated technology reduce chances of maintenance
and replacement.
• LED light source ensures long lifetime, maintenance free
• Shock and vibration resistant
• Corrosion resistant and UV stable polycarbonate housing
• Ease of mount, mount accessories available
• With GPS function, can work with other lights synchronously(optional).
• Corrosion resistant lamp& housing-suitable for off-shore use.
Applications:
• High rise building marking • Telecom tower marking
• Road obstruction marking • Wind turbine
• Port, dock entrance & walkway • Bridge cranes
• Offshore gas & oil platform

Shanghai Lansing Electronics Co., Ltd Tel : [phone] Fax：[phone] Web：www.lansinglight.com E-mail：[e-mail]
Add: No 609, Tahui Rd, Shihudang Town, Songjiang Dist Shanghai, China, 201612
All rights reserved by Lansing,without the written authorization of the Lansing, any part thereof shall not be reproduced or transmitted in any form.
TY10D LED Dual Low Intensity Solar
Powered Obstruction Light (Type A)
2/72 /7
Product Dimension
Specifications:
Peak Intensity(cd)
Steady-on: Blue-2.8 Red-6 Green-8.0 White-7.0 Yellow-6.5
Flashing: Blue-5.5 Red-10 Green-15 White-12.1 Yellow-11.2
Available colors
Red, Green, White, Yellow or Blue
Nominal Night Range
>3.6KM
Horizontal Output(degree)
360
Vertical Divergence
0 to +7
Reflector Type
Omnidirectional 360 LED Reflector
Led life Expectancy(hours)
>100,000
Operating Voltage(V)
3.6
Temperature Range
-40 to 80℃
Solar module Type
Multicrystalline
Output(watts)
1.8(watt)
Charging regulation
17
Power supply
Microprocessor controlled
Battery type
High grade NiMH- Environmentally Friendly
Battery Capacity(Ah)
8
Nominal Voltage(V)
3.6
Autonomy(nights)
Steady Burning: >10 days
Flashing: >20 days (14 hours darkness, 12.5% duty cycle)
Body material
Polycarbonate or Die casting Aluminum
Lens Material
Polycarbonate (UV stabilized)
Weight
3.5kg (polycarbonate) or 5kg (die casting aluminum)
Humidity
0 to 100%
Product life Expectancy
Up to 8 years
Warranty
5 years on the light, and 2 years on the battery

Shanghai Lansing Electronics Co., Ltd Tel : [phone] Fax：[phone] Web：www.lansinglight.com E-mail：[e-mail]
Add: No 609, Tahui Rd, Shihudang Town, Songjiang Dist Shanghai, China, 201612
All rights reserved by Lansing,without the written authorization of the Lansing, any part thereof shall not be reproduced or transmitted in any form.
TY10D LED Dual Low Intensity Solar
Powered Obstruction Light (Type A)
3/73 /7
Compliance with
• ICAO Annex 14, Volume I,
Obstruction Light Low Intensity Type A
• FAA AC No. 150/5345-43, L-810
• DGAC Mexico
TY10DA
TY10DA is updated with a flash frequency adjustable switch, which can set 40, 50, 60, 70 and
90 FPM (Flash per minute). Additional, a Dry Contact Relay is built in the light to report light
failure to central monitoring devices, in case of working with junction box or control box.
Alarm report conditions:
• Lamp low current(when lamp current falls<50%)
• Solar panel failure
• Battery fail
TY10DW
TY10DW is further updated from TY10DA, which can realize both Flashing Frequency
Adjusting&Alarm
Reporting functions, through built in 2.4G wireless module.
In case of working with our wireless control box, TY10DW can report failure status to central
monitoring in the BTS. Distance between TY10DW& receiver should be <100meters
Alarm report conditions:
• Lamp low current(when lamp current falls<50%)
• Solar panel failure
• Battery fail
Ordering Code
TY10D
TY10DA
TY10DW
Basic functions
Flashing frequency adjustable
Synchronization
Light failure alarm report
Wireless
Note: Synchronization & alarm report functions need junction box or control box to be
in the system

Shanghai Lansing Electronics Co., Ltd Tel : [phone] Fax：[phone] Web：www.lansinglight.com E-mail：[e-mail]
Add: No 609, Tahui Rd, Shihudang Town, Songjiang Dist Shanghai, China, 201612
All rights reserved by Lansing,without the written authorization of the Lansing, any part thereof shall not be reproduced or transmitted in any form.
TY10D LED Dual Low Intensity Solar
Powered Obstruction Light (Type A)
4/74 /7

Shanghai Lansing Electronics Co., Ltd Tel : [phone] Fax：[phone] Web：www.lansinglight.com E-mail：[e-mail]
Add: No 609, Tahui Rd, Shihudang Town, Songjiang Dist Shanghai, China, 201612
All rights reserved by Lansing,without the written authorization of the Lansing, any part thereof shall not be reproduced or transmitted in any form.
TY10D LED Dual Low Intensity Solar
Powered Obstruction Light (Type A)
5/75 /7
Installation and operation:
Option 1
1. Secure the light on a smooth surface which has enough strength, if there is no mounting
surface, we can customize special mounting bracket as request
2. When installation, please stay away the nearby light source
3. Use 4XM8 screws to fix the light base on the smooth place
Option 2:
Use a MBP80 Mounting brackets below picture) to fix the light on the pole, pipe, telecom
tower or any other places required the light.

Shanghai Lansing Electronics Co., Ltd Tel : [phone] Fax：[phone] Web：www.lansinglight.com E-mail：[e-mail]
Add: No 609, Tahui Rd, Shihudang Town, Songjiang Dist Shanghai, China, 201612
All rights reserved by Lansing,without the written authorization of the Lansing, any part thereof shall not be reproduced or transmitted in any form.
TY10D LED Dual Low Intensity Solar
Powered Obstruction Light (Type A)
6/76 /7
Notice:
• The part of material of products is PC( like lamp cover and lamp shell ), so it cannot direct
or indirect touch the organic solvent, such as industrial alcohol, banana oil, isopropyl alcohol,
carbon tetrachloride, cyclohexanone and so on, otherwise, the product will be corrosion.
• Please read the instruction manual carefully before operation.
• For protection of batteries during transport and storage, lights bottom installed sleep
switch, and is set to sleep mode, please check whether the lamp is in normal working
condition before installation or testing, turn on the switch according to the instruction.
• The bottom of the switch control: Press 3 to 5 seconds, the light starts to sleep (stopped
working); Press 1 to 2 seconds, the lights began to work); testing and operation of switches in
the dark environments, or covered with black shade cloth in order to operate correctly.
• Any question in operation please contact our company.

Shanghai Lansing Electronics Co., Ltd Tel : [phone] Fax：[phone] Web：www.lansinglight.com E-mail：[e-mail]
Add: No 609, Tahui Rd, Shihudang Town, Songjiang Dist Shanghai, China, 201612
All rights reserved by Lansing,without the written authorization of the Lansing, any part thereof shall not be reproduced or transmitted in any form.
TY10D LED Dual Low Intensity Solar
Powered Obstruction Light (Type A)
7/77 /7
BATTERY CHARGING IF NECESSARY:
FIRST WAY: Put the light under sunlight
SECOND WAY:Use a Charger( around 4.2v-5v) such as switching power supply etc
1.open the cover
2. Put the dip switch
to “ON” position
3. Close the cover,
and put the light
under sunlight
1.Open the back cover
(take care of the seal
ring)
2.Take off the
battery
3.Find a suitable charger
（4.2v-5V ）and connect
with the battery(note +/-),
and charge the battery for
2-3 hrs
4.After finishing the
charging, assemble the
light. Note the seal ring
to waterproof.