Lantronix ION219-x User manual

ION219-x
ION 19-Slot Chassis
Install Guide
Part Number 33412
Revision D January 2022

Lantronix ION219-x Install Guide
33412 Rev. D https://www.lantronix.com/ 2
Intellectual Property
© 2022 Lantronix, Inc. All rights reserved. No part of the contents of this publication may be transmitted or
reproduced in any form or by any means without the written permission of Lantronix.
Lantronix is a registered trademark of Lantronix, Inc. in the United States and other countries. All other
trademarks and trade names are the property of their respective holders.
Patented: https://www.lantronix.com/legal/patents/; additional patents pending.
Warranty
For details on the Lantronix warranty policy, go to our web site at http://www.lantronix.com/support/warranty.
Contacts
Lantronix Corporate Headquarters
48 Discovery, Suite 250
Irvine, CA 92618, USA
Toll Free: 800-526-8766
Phone: [phone]
Fax: [phone]
Technical Support
Tel: [phone], Tel: [phone], or https://www.lantronix.com/technical-support/
Sales Offices
For a current list of our domestic and international sales offices, go to the Lantronix web site at
www.lantronix.com/about/contact.
Disclaimer
All information contained herein is provided “AS IS.” Lantronix undertakes no obligation to update the information
in this publication. Lantronix does not make, and specifically disclaims, all warranties of any kind (express,
implied, or otherwise) regarding title, non-infringement, fitness, quality, accuracy, completeness, usefulness,
suitability, or performance of the information provided herein. Lantronix shall have no liability whatsoever to any
user for any damages, losses and causes of action (whether in contract or in tort or otherwise) in connection with
the user’s access or usage of any of the information or content contained herein. The information and
specifications contained in this document are subject to change without notice.
Revision History
Rev
Date
Description
2/16/10
A
Initial release for ION219-x 19-Slot Chassis.
3/25/11
B
Added DC power supply technical content.
1/28/20 C
Add ION219-AAMB, IONPS-A-R1, IONPS-D-R1, S3221-1040-T, PS 25138, DoC and
MTBF, update power supply and contact info, and change format. Update to reflect UL
and cUL.
3/10/22
D
Initial Lantronix rebrand.

Lantronix ION219-x Install Guide
33412 Rev. D https://www.lantronix.com/ 3
Cautions and Warnings
Definitions
Cautions indicate that there is the possibility of poor equipment performance or potential damage to the
equipment. Warnings indicate that there is the possibility of injury to person.
Cautions and Warnings appear here and may appear throughout this manual where appropriate. Failure to read
and understand the information identified by this symbol could result in poor equipment performance, damage
to the equipment, or injury to persons.
Cautions
Caution: Do not ship or store devices near strong electrostatic, electromagnetic, magnetic, or radioactive fields.
Caution: When handling chassis Devices (NIDs) observe electrostatic discharge precautions. This requires proper grounding
(i.e., wear a wrist strap).
Caution: Copper based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232, RS422, RS485, DS1, DS3, Video Coax, etc.,
are intended to be connected to intra-building (inside plant) link segments that are not subject to lightening transients or
power faults. They are not to be connected to inter-building (outside plant) link segments that are subject to lightening.
Caution: Do not install the NIDs in areas where strong electromagnetic fields (EMF) exist. Failure to observe this caution
could result in poor NID performance.
Caution: Read the installation instructions before connecting the chassis to a power source. Failure to observe this caution
could result in poor performance or damage to the equipment.
Caution: Only trained and qualified personnel should install or perform maintenance on the device. Failure to observe this
caution could result in poor performance or damage to the equipment.
Caution: Do not let optical fibers come into physical contact with any bare part of the body since they are fragile, and
difficult to detect and remove from the body.
Caution: Do not bend any part of an optical fiber/cable to a diameter that is smaller than the minimum permitted according
to the manufacturer’s specification (usually about 65 mm or 2.5 in)!

Lantronix ION219-x Install Guide
33412 Rev. D https://www.lantronix.com/ 4
Warnings
Warning: Use of controls, adjustments, or the performance of procedures other than those specified herein may result in
hazardous radiation exposure.
Warning: Visible and invisible laser radiation when open. Do not look into the beam or view the beam directly with optical
instruments. Failure to observe this warning could result in an eye injury or blindness.
Warning:DO NOT connect the power supply module to external power before installing it into the chassis. Failure to
observe this warning could result in an electrical shock or death.
Warning: Select mounting bracket locations on the chassis that will keep the chassis balanced when mounted in the rack.
Failure to observe this warning could allow the chassis to fall, resulting in equipment damage and/or possible injury to
persons.
Warning: Do not work on the chassis, connect, or disconnect cables during a storm with lightning. Failure to observe this warning
could result in an electrical shock or death.
See Electrical Safety Warnings on page 29 for Electrical Safety Warnings translated into multiple languages.
FCC warning
This equipment has been tested and found to comply with the limits for class A devices, pursuant to part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
commercial installation. This equipment generates, uses, and radiates radio frequency energy; therefore, if not
installed and used in accordance with the instructions in this document, the device could cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference; all customers will be required to correct the interference problem at their expense.

Lantronix ION219-x Install Guide
33412 Rev. D https://www.lantronix.com/ 5
Contents
1Introduction and Description.................................................................................................................8
Product Description ................................................................................................................................................8
Features..................................................................................................................................................................8
Ordering Information...............................................................................................................................................9
ION219-x Chassis Specifications ........................................................................................................................ 10
IONPS-x Power Supply Specifications ................................................................................................................ 11
About this Manual ................................................................................................................................................ 11
Related Manuals and Online Help....................................................................................................................... 11
Unpacking............................................................................................................................................................ 12
2Site Preparation...................................................................................................................................13
Chassis Management Methods ........................................................................................................................... 13
Chassis Rear ....................................................................................................................................................... 14
3Installation...........................................................................................................................................15
Cautions............................................................................................................................................................... 15
Safety Considerations.......................................................................................................................................... 15
Lifting Safety .................................................................................................................................................... 15
Electrical Safety ............................................................................................................................................... 15
Site Requirements ............................................................................................................................................... 16
AC Power......................................................................................................................................................... 16
Plant Wiring ..................................................................................................................................................... 16
Site Environment ............................................................................................................................................. 16
Equipment Racks............................................................................................................................................. 16
Installation Procedures ........................................................................................................................................ 17
Installing the Chassis....................................................................................................................................... 17
Tabletop Installation......................................................................................................................................... 17
Rack Installation .............................................................................................................................................. 17
Rack Mount Ears ............................................................................................................................................. 17
Rack Installation Procedure............................................................................................................................. 19
Grounding Lugs ............................................................................................................................................... 19
Grounding Path................................................................................................................................................ 20
Ground Installation........................................................................................................................................... 21
Chassis Slide-In Cards (SICs) and IONMM Installation ...................................................................................... 21
Chassis Power LEDs ........................................................................................................................................... 22
Power Indicator LEDs ...................................................................................................................................... 22
Powering the ION219-x chassis .......................................................................................................................... 23
4Network Connectivity ..........................................................................................................................24
Connecting Chassis SICs to the Network............................................................................................................ 24
SICs to Network Connections.......................................................................................................................... 24
Chassis Daily Operation .................................................................................................................................. 24
SIC Monitoring ................................................................................................................................................. 24
Network Management.......................................................................................................................................... 24
Firmware and FocalPoint Applications ............................................................................................................ 24
5Troubleshooting ..................................................................................................................................25
Introduction .......................................................................................................................................................... 25

Lantronix ION219-x Install Guide
33412 Rev. D https://www.lantronix.com/ 6
Record Model and System Information ............................................................................................................... 26
Compliance Information....................................................................................................................................... 27
Declaration of Conformity .................................................................................................................................... 28
Electrical Safety Warnings................................................................................................................................... 29
Appendix A Cable Specification and Connectors ..................................................................................30
RJ45 Cable .......................................................................................................................................................... 30
Coax Cable and BNC Connectors....................................................................................................................... 31
USB (Universal Serial Bus) ................................................................................................................................. 32
Cable Shield Grounding ...................................................................................................................................... 32
Fiber Cables ........................................................................................................................................................ 33
Fiber Connectors ................................................................................................................................................. 33

Lantronix ION219-x Install Guide
33412 Rev. D https://www.lantronix.com/ 7
Figures
Figure 1: ION219-x Chassis .........................................................................................................................................9
Figure 2: Unpacking ................................................................................................................................................. 12
Figure 3: ION219-x Chassis Front ............................................................................................................................ 13
Figure 4: ION219-x Chassis Rear View..................................................................................................................... 14
Figure 5: Unsafe Lifting Techniques ........................................................................................................................ 15
Figure 6: Rack Mount Ear Installation Positions...................................................................................................... 17
Figure 7: ION219-x Rack Mount Ear Installation ..................................................................................................... 18
Figure 8: Rack Mounting.......................................................................................................................................... 19
Figure 9: Chassis Grounding Hardware ................................................................................................................... 20
Figure 10: Grounding the Chassis............................................................................................................................ 21
Figure 11: Power Supply LEDs ................................................................................................................................. 22
Figure 12: RJ45 Pinouts ........................................................................................................................................... 30
Figure 13: Coax Cable and BNC Coax Connector Ends ............................................................................................ 31
Figure 14: USB Peripheral and Cable Ends .............................................................................................................. 32
Figure 15: Simplex Fiber Optic Equipment Cable .................................................................................................... 33
Figure 16: Fiber Optic Cable Connector Ends.......................................................................................................... 33

Lantronix ION219-x Install Guide
33412 Rev. D https://www.lantronix.com/ 8
1 Introduction and Description
Product Description
The ION219-x is an intelligent, high-density, multi-protocol system supporting a variety of network interface
devices. Designed for both carrier class and enterprise network applications where multiple points of fiber
integration and secure network management of the fiber interface devices is essential. An end-to-end fiber
integration solution can be achieved by pairing the modules in a high density ION chassis with the modules in
another ION chassis, an ION stand-alone, or a Lantronix’ Point System™ stand-alone device. To take full
advantage of all the features and functions available with the ION Chassis, an ION Management Module
(IONMM) is required. The IONMM connects to the chassis backplane and communicates with the individual
cards in the ION Chassis. Each slide-in-module for the ION Chassis has specific features and functions that are
controlled via the IONMM. A network administrator can configure, monitor, and troubleshoot ION slide-in-
modules remotely via the IONMM.
Features
Access Methods
•Web-browser: Access the ION Management Module using a standard web browser such as Internet Explorer
or Mozilla Firefox.
•Command Line Interface (CLI): CLI access can be done via telnet remotely or via the local console port on
the ION Management Module.
•SNMP: Since the ION platform is based on public MIBs you can easily manage the ION with a standard
network management system (NMS) such as SNMPc, HPOV or any other standard SNMP platform.
•Focal Point: Lantronix offers a free SNMP graphical user interface (GUI) software (Focal Point) for the
management purposes. Focal Point offers full read and read/write capabilities in a user friendly GUI.
Security Features
When the optional management module is used, the following security features are available, allowing you to
control access to the ION Chassis via the ION Management Module. Ensuring that only authorized personnel can
view and change the settings to the slide-in-modules.
•Management VLAN
•SSL
•SSH
•802.1x
•SNMPv1, v2, and v3
Key Management Features
•Variety of management access methods including; telnet, web, SNMP
•Single slot design allows for more slide-in-modules to be inserted in the ION Chassis
•Management VLAN
•Based on Public MIBs
•Two 10/100 Ethernet interfaces
•USB console port
•Syslog
•TFTP upgrade/backup of slide-in-modules
•Import/Export configuration files in human readable / editable format
•Multiple community strings

Lantronix ION219-x Install Guide
33412 Rev. D https://www.lantronix.com/ 9
The ION219-x is shown below:
Figure 1: ION219-x Chassis
Ordering Information
These ION219-x chassis standard product and options are available:
Product Number Description
ION219-A 19-Slot Chassis for the ION Platform, AC Powered.
ION219-D 19-Slot Chassis for the ION Platform, DC Powered.
ION219-AAMB 19-Slot Chassis for the ION Platform with (2) AC power supplies and (1) ION
Management Module
Accessories (sold separately)
IONMM Management Module for the ION Chassis.
IONPS-A Redundant AC Power Supply for 19-Slot ION Chassis.
IONPS-D Redundant -48VDC Power Supply for 19-Slot ION Chassis.
IONPS-A-R1 Redundant AC Power Supply for ION219 Chassis.
IONPS-D-R1 Redundant -48VDC Power Supply Module for ION19 Chassis.
WMBC-2RU Wall mount brackets for 2RU Chassis.
IONRE-23 ION Rack Mount Ears.
IONFP ION Blank face plate (required for open slots).
Power Cord
(included)
To order the country-specific power cord, add the -xx from the list below to the
end of the SKU; Ex: ION219-A-xx, where -xx = Country Code: -NA = North
America, -LA = Latin America, -EU = Europe, -UK = United Kingdom, -SA = South
America, -JP = Japan, -OZ = Australia, -BR = Brazil. Note: Only for ION219-A and
ION219-AAMB.
SFPs
Lantronix offers a full line of small form factor pluggable (SFP) transceivers and
passive coarse wave division multiplexing (CWDM) filters.
See the Lantronix SFP page for details.

Lantronix ION219-x Install Guide
33412 Rev. D https://www.lantronix.com/ 10
ION219-x Chassis Specifications
The ION219-x chassis was designed to meet these standards:
Slots 19 Slots in front for ION slide in-cards and 2 Slots in rear for power supply modules.
IEEE Standards IEEE 802.3™-2000
Unit LEDs Power On LED for each installed power supply module.
Compliance UL listed, EN55022 Class A, EN55024, CE Mark, FCC Class A, CISPR Class A
Power
Two open bays for ION power supply modules, supporting Universal Input 100 –
240 VAC, or -48VDC rated at 200 watts max output. Note: Power supply module
supplies +12VDC maximum to each slot in the chassis. Only one power supply
module is required to power the chassis and the installed modules, the optional
second power supply module provides redundancy for instant fail-over.
Power Consumption up to 150 watts
Power Source IONPS-A, IONPS-D, IONPS-A-R1, IONPS-D-R1
Dimensions Width: 17.0” (430mm) x Depth: 15.8” (401mm) x Height: 3.5” (89mm).
Weight 19 lbs. [8.6 kg] (ION219 shipping weight).
Operating Temp. 0° ~ +50 °C
Storage Temp. -40° ~ +85 °C
Altitude 0-10,000 feet
Operating Humidity 5% to 95% (non-condensing).
Compliance UL/cUL listed, EN55022, EN55024, CE Mark, FCC Class A, CISPR Class A.
MTBF*
ION219-A: Greater than 23,570 MIL-HDBK-217F Hours.
Greater than 64,800 Bellcore Hours.
ION219-D: Greater than 42,900 MIL-HDBK-217F Hours.
Greater than 118,000 Bellcore Hours.
ION219-A-R1: Greater than 23,570 MIL-HDBK-217F Hours.
Greater than 64,800 Bellcore Hours.
ION219-D-R1: Greater than 42,900 MIL-HDBK-217F Hours.
Greater than 118,000 Bellcore Hours.
Warranty Limited Lifetime Warranty
* MTBF calculations done with these settings: Prediction Method: MIL-HDBK-217F Parts Count. Environment:
GB, Ground Benign. Temperature 25°C.