Lantronix Eds-md eds-md4 User manual

Part Number 900-591

Revision D November 2011

EDS-MD TM User Guide

EDS-MD4

EDS-MD8

EDS-MD16

EDS-MD User Guide 2

reproduced in any form or by any means without the written permission of Lantronix. Printed in the

United States of America.

Ethernet is a trademark of XEROX Corporation. Windows is a trademark of Microsoft Corporation.

Linux is a registered trademark of Linus Torvalds.

Warranty

For details on the Lantronix warranty replacement policy, please go to our web site at

www.lantronix.com/support/warranty.

Contacts

Lantronix Corporate Headquarters

167 Technology Drive

Irvine, CA 92618, USA

Phone: 949-453-3990

Fax: 949-450-7249

Technical Support

Online: www.lantronix.com/support

Sales Offices

For a current list of our domestic and international sales offices, go to the Lantronix web site at

www.lantronix.com/about/contact.

Disclaimer

The information in this guide may change without notice. The manufacturer assumes no

responsibility for any errors that may appear in this guide.

Revision History

Date Rev. Comments

September 2011 A Initial Document for firmware release 7.2.0.0.

October 2011 B Updated power cord part number information.

November 2011 C Updated ethernet port information and cover product image.

November 2011 D Added Suppliers Declaration of Conformity document.

EDS-MD User Guide 3

Table of Contents

Warranty _________________________________________________________________2

Contacts _________________________________________________________________2

Disclaimer ________________________________________________________________2

Revision History ___________________________________________________________2

List of Figures ____________________________________________________________12

List of Tables _____________________________________________________________13

1: Using This Guide 15

Purpose and Audience _____________________________________________________15

Summary of Chapters ______________________________________________________15

Safety Information _________________________________________________________16

Cover _______________________________________________________________16

Power Plug ___________________________________________________________16

Input Supply __________________________________________________________16

Grounding ____________________________________________________________16

Fuses _______________________________________________________________16

Battery ______________________________________________________________17

Wall Mounting _________________________________________________________17

Port Connections ______________________________________________________17

Equipment Classifications _______________________________________________18

Environmental Conditions for Transportation and Storage _______________________18

Cleaning Instructions ___________________________________________________18

Electromagnetic Interference _____________________________________________18

Additional Documentation ___________________________________________________19

2: Introduction 20

Key Features _____________________________________________________________20

Applications ______________________________________________________________20

Protocol Support _________________________________________________________20

Troubleshooting Capabilities _________________________________________________21

Configuration Methods _____________________________________________________21

Addresses and Port Numbers ________________________________________________21

Hardware Address _____________________________________________________21

IP Address ___________________________________________________________21

Port Numbers _________________________________________________________22

Product Information Label ___________________________________________________22

EDS-MD User Guide 4

3: Installation of EDS-MD4/8/16 Device Servers 23

Package Contents _________________________________________________________23

User-Supplied Items _______________________________________________________23

Identifying Hardware Components ____________________________________________23

Serial Ports ___________________________________________________________24

Ethernet Port _________________________________________________________24

LEDs ________________________________________________________________24

Reset to Default Button _________________________________________________25

To restore factory default settings: ______________________________________25

Technical Specification _____________________________________________________26

Installing the EDS-MD ______________________________________________________27

Finding a Suitable Location ______________________________________________27

Connect the EDS-MD to one or more serial devices ___________________________27

4: Using DeviceInstaller 28

Accessing EDS-MD Using DeviceInstaller ______________________________________28

Device Detail Summary _____________________________________________________28

5: Configuration Using Web Manager 30

Accessing Web Manager ___________________________________________________30

Device Status Page ____________________________________________________31

Web Manager Page Components _____________________________________________32

Navigating the Web Manager ________________________________________________33

6: Line and Tunnel Settings 35

RS232/RS485 _________________________________________________________35

Line Settings _____________________________________________________________35

To Configure Line Settings _______________________________________________36

Using Web Manager ________________________________________________36

Using the CLI ______________________________________________________36

Using XML ________________________________________________________36

To View Line Statistics __________________________________________________36

Using Web Manager ________________________________________________36

Using the CLI ______________________________________________________37

Using XML ________________________________________________________37

Tunnel Settings ___________________________________________________________37

Serial Settings ________________________________________________________37

To Configure Tunnel Serial Settings ________________________________________37

Using Web Manager ________________________________________________37

Using the CLI ______________________________________________________38

Using XML ________________________________________________________38

Packing Mode _________________________________________________________38

EDS-MD User Guide 5

To Configure Tunnel Packing Mode Settings _________________________________38

Using Web Manager ________________________________________________38

Using the CLI ______________________________________________________39

Using XML ________________________________________________________39

Accept Mode __________________________________________________________39

To Configure Tunnel Accept Mode Settings __________________________________40

Using Web Manager ________________________________________________40

Using the CLI ______________________________________________________40

Using XML ________________________________________________________40

Connect Mode ________________________________________________________41

To Configure Tunnel Connect Mode Settings ________________________________42

Using Web Manager ________________________________________________42

Using the CLI ______________________________________________________42

Using XML ________________________________________________________42

Disconnect Mode ______________________________________________________42

To Configure Tunnel Disconnect Mode Settings ______________________________43

Using Web Manager ________________________________________________43

Using the CLI ______________________________________________________43

Using XML ________________________________________________________43

Modem Emulation ______________________________________________________43

To Configure Tunnel Modem Emulation Settings ______________________________44

Using Web Manager ________________________________________________44

Using the CLI ______________________________________________________44

Using XML ________________________________________________________44

Statistics _____________________________________________________________44

To View Tunnel Statistics ________________________________________________44

Using Web Manager ________________________________________________44

Using the CLI ______________________________________________________45

Using XML ________________________________________________________45

7: Network Settings 46

Network Interface Settings __________________________________________________46

To Configure Network Interface Settings ____________________________________47

Using Web Manager ________________________________________________47

Using the CLI ______________________________________________________47

Using XML ________________________________________________________47

To View Network Interface Status _________________________________________47

Using Web Manager ________________________________________________47

Network Link Settings ______________________________________________________48

To Configure Network Link Settings ________________________________________48

Using Web Manager ________________________________________________48

Using the CLI ______________________________________________________48

Using XML ________________________________________________________48

EDS-MD User Guide 6

8: Terminal and Host Settings 49

Terminal Settings _________________________________________________________49

To Configure the Terminal Network Connection _______________________________50

Using Web Manager ________________________________________________50

Using the CLI ______________________________________________________50

Using XML ________________________________________________________50

To Configure the Terminal Line Connection __________________________________50

Using Web Manager ________________________________________________50

Using the CLI ______________________________________________________50

Using XML ________________________________________________________50

Host Configuration ________________________________________________________50

To Configure Host Settings ______________________________________________51

Using Web Manager ________________________________________________51

Using the CLI ______________________________________________________51

Using XML ________________________________________________________51

9: Services Settings 52

DNS Settings _____________________________________________________________52

To View or Configure DNS Settings: _______________________________________52

Using Web Manager ________________________________________________52

Using the CLI ______________________________________________________52

Using XML ________________________________________________________52

FTP Settings _____________________________________________________________53

To Configure FTP Settings _______________________________________________53

Using Web Manager ________________________________________________53

Using the CLI ______________________________________________________53

Using XML ________________________________________________________53

Syslog Settings ___________________________________________________________53

To View or Configure Syslog Settings: ______________________________________54

Using Web Manager ________________________________________________54

Using the CLI ______________________________________________________54

Using XML ________________________________________________________54

HTTP Settings ____________________________________________________________54

To Configure HTTP Settings _____________________________________________55

Using Web Manager ________________________________________________55

Using the CLI ______________________________________________________55

Using XML ________________________________________________________55

To Configure HTTP Authentication _________________________________________56

Using Web Manager ________________________________________________56

Using the CLI ______________________________________________________56

Using XML ________________________________________________________56

RSS Settings _____________________________________________________________56

EDS-MD User Guide 7

To Configure RSS Settings ______________________________________________56

Using Web Manager ________________________________________________56

Using the CLI ______________________________________________________57

Using XML ________________________________________________________57

Real Time Clock (RTC) Settings ______________________________________________57

To Configure RTC Settings ______________________________________________57

Using Web Manager ________________________________________________57

Using the CLI ______________________________________________________57

Using XML ________________________________________________________57

10: Security Settings 58

SSH Settings _____________________________________________________________58

SSH Server Host Keys __________________________________________________58

SSH Client Known Hosts ________________________________________________59

SSH Server Authorized Users ____________________________________________59

SSH Client Users ______________________________________________________60

To Configure SSH Settings ______________________________________________61

Using Web Manager ________________________________________________61

Using the CLI ______________________________________________________61

Using XML ________________________________________________________61

SSL Settings _____________________________________________________________61

Certificate and Key Generation ___________________________________________62

To Create a New Credential ______________________________________________62

Using Web Manager ________________________________________________62

Using the CLI ______________________________________________________62

Using XML ________________________________________________________63

Certificate Upload Settings _______________________________________________63

To Configure an Existing SSL Credential ____________________________________63

Using Web Manager ________________________________________________63

Using the CLI ______________________________________________________63

Using XML ________________________________________________________63

Trusted Authorities _____________________________________________________64

To Upload an Authority Certificate _________________________________________64

Using Web Manager ________________________________________________64

Using the CLI ______________________________________________________64

Using XML ________________________________________________________64

11: Maintenance and Diagnostics Settings 65

Filesystem Settings ________________________________________________________65

File Display ___________________________________________________________65

To Display Files _______________________________________________________65

Using Web Manager ________________________________________________65

Using the CLI ______________________________________________________65

EDS-MD User Guide 8

Using XML ________________________________________________________65

File Modification _______________________________________________________66

File Transfer __________________________________________________________66

To Transfer or Modify Filesystem Files ______________________________________67

Using Web Manager ________________________________________________67

Using the CLI ______________________________________________________67

Using XML ________________________________________________________67

IP Network Stack Settings ___________________________________________________67

To Configure IP Network Stack Settings ____________________________________67

Using Web Manager ________________________________________________67

Using the CLI ______________________________________________________67

Using XML ________________________________________________________67

To Configure ICMP Network Stack Settings __________________________________68

Using Web Manager ________________________________________________68

Using the CLI ______________________________________________________68

Using XML ________________________________________________________68

To Configure ARP Network Stack Settings __________________________________68

Using Web Manager ________________________________________________68

Using the CLI ______________________________________________________68

Using XML ________________________________________________________68

To Configure SMTP Network Stack Settings _________________________________69

Using Web Manager ________________________________________________69

Using the CLI ______________________________________________________69

Using XML ________________________________________________________69

Query Port _______________________________________________________________69

To Configure Query Port Settings _________________________________________69

Using Web Manager ________________________________________________69

Using the CLI ______________________________________________________69

Using XML ________________________________________________________70

Diagnostics ______________________________________________________________70

Hardware ____________________________________________________________70

To View Hardware Information ____________________________________________70

Using Web Manager ________________________________________________70

Using the CLI ______________________________________________________70

Using XML ________________________________________________________70

IP Sockets ___________________________________________________________70

To View the List of IP Sockets ____________________________________________70

Using Web Manager ________________________________________________70

Using the CLI ______________________________________________________70

Using XML ________________________________________________________70

Ping ________________________________________________________________70

To Ping a Remote Host _________________________________________________71

Using Web Manager ________________________________________________71

EDS-MD User Guide 9

Using the CLI ______________________________________________________71

Using XML ________________________________________________________71

Traceroute ___________________________________________________________71

To Perform a Traceroute ________________________________________________71

Using Web Manager ________________________________________________71

Using the CLI ______________________________________________________71

Using XML ________________________________________________________71

Log _________________________________________________________________72

To Configure the Diagnostic Log Output ____________________________________72

Using Web Manager ________________________________________________72

Using the CLI ______________________________________________________72

Using XML ________________________________________________________72

Memory ______________________________________________________________72

To View Memory Usage _________________________________________________72

Using Web Manager ________________________________________________72

Using the CLI ______________________________________________________72

Using XML ________________________________________________________72

Processes ____________________________________________________________73

To View Process Information _____________________________________________73

Using Web Manager ________________________________________________73

Using the CLI ______________________________________________________73

Using XML ________________________________________________________73

Threads _________________________________________________________________73

To View Thread Information ______________________________________________73

Using Web Manager ________________________________________________73

Using the CLI ______________________________________________________73

Using XML ________________________________________________________73

System Settings __________________________________________________________74

To Reboot or Restore Factory Defaults _____________________________________74

Using Web Manager ________________________________________________74

Using the CLI ______________________________________________________74

Using XML ________________________________________________________74

12: Advanced Settings 75

Email Settings ____________________________________________________________75

To View, Configure and Send Email ________________________________________75

Using Web Manager ________________________________________________75

Using the CLI ______________________________________________________76

Using XML ________________________________________________________76

Command Line Interface Settings _____________________________________________76

Basic CLI Settings _____________________________________________________76

To View and Configure Basic CLI Settings ___________________________________76

Using Web Manager ________________________________________________76

EDS-MD User Guide 10

Using the CLI ______________________________________________________76

Using XML ________________________________________________________76

Telnet Settings ________________________________________________________77

To Configure Telnet Settings _____________________________________________77

Using Web Manager ________________________________________________77

Using the CLI ______________________________________________________77

Using XML ________________________________________________________77

SSH Settings _________________________________________________________77

To Configure SSH Settings ______________________________________________78

Using Web Manager ________________________________________________78

Using the CLI ______________________________________________________78

Using XML ________________________________________________________78

XML Settings _____________________________________________________________78

XML: Export Configuration _______________________________________________78

To Export Configuration in XML Format _____________________________________79

Using Web Manager ________________________________________________79

Using the CLI ______________________________________________________79

Using XML ________________________________________________________79

XML: Export Status _____________________________________________________79

To Export in XML Format ________________________________________________79

Using Web Manager ________________________________________________79

Using the CLI ______________________________________________________79

Using XML ________________________________________________________80

XML: Import Configuration _______________________________________________80

Import Configuration from External File _____________________________________80

Import Configuration from the Filesystem ____________________________________80

To Import Configuration in XML Format _____________________________________80

Using Web Manager ________________________________________________80

Using the CLI ______________________________________________________80

Using XML ________________________________________________________80

13: Updating Firmware 81

Obtaining Firmware ________________________________________________________81

Loading New Firmware _____________________________________________________81

14: VIP Settings 82

Virtual IP (VIP) Configuration ________________________________________________82

To Configure VIP Settings _______________________________________________82

Using Web Manager ________________________________________________82

Using the CLI ______________________________________________________82

Using XML ________________________________________________________82

Virtual IP (VIP) Status ______________________________________________________82

To View VIP Status _____________________________________________________82

EDS-MD User Guide 11

Using Web Manager ________________________________________________82

Using the CLI ______________________________________________________82

Using XML ________________________________________________________83

Virtual IP (VIP) Counters ____________________________________________________83

To View VIP Counters __________________________________________________83

Using Web Manager ________________________________________________83

Using the CLI ______________________________________________________83

Using XML ________________________________________________________83

15: Branding the EDS-MD4/8/16 84

Web Manager Customization ________________________________________________84

Short and Long Name Customization __________________________________________85

To Customize Short or Long Names _______________________________________85

Using Web Manager ________________________________________________85

Using the CLI ______________________________________________________85

Using XML ________________________________________________________85

Appendix A: Technical Support 86

Appendix B: Binary to Hexadecimal Conversions 87

Converting Binary to Hexadecimal ____________________________________________87

Conversion Table ______________________________________________________87

Scientific Calculator ____________________________________________________87

Appendix C: Compliance 89

Appendix D: Lantronix Cables, Adapters

and Serial Port Pinouts 93

Cables and Adapters _______________________________________________________93

Adapters and Serial Port Pinouts _____________________________________________94

EDS-MD User Guide 12

List of Figures

Figure 2-1 EDS-MD Product Label ___________________________________________________22

Figure 3-1 Front View of the EDS-MD16 ______________________________________________24

Figure 3-2 Back View of the EDS-MD4, EDS-MD8 and EDS-MD16 _________________________24

Figure 5-1 Components of the Web Manager Page ______________________________________32

Figure 17-2 Windows Scientific Calculator _____________________________________________88

Figure 17-3 Hexadecimal Values in the Scientific Calculator _______________________________88

Figure 18-4 Suppliers Declaration of Conformity ________________________________________91

Figure 19-2 RJ45 Receptacle to DB25M DTE Adapter (PN 200.2066A) ______________________94

Figure 19-3 RJ45 Receptacle to DB25M DCE Adapter (PN 200.2073) _______________________94

Figure 19-4 RJ45 Receptacle to DB25F DTE Adapter (PN 200.2067A )______________________95

Figure 19-5 RJ45 Receptacle to DB25F DCE Adapter (PN 200.2074) _______________________95

Figure 19-6 RJ45 Receptacle to DB9M DTE Adapter (PN 200.2069A)_______________________96

Figure 19-7 RJ45 Receptacle to DB9M DCE Adapter (PN 200.2071)________________________96

Figure 19-8 RJ45 Receptacle to DB9F DTE Adapter (PN 200.2070A)________________________97

Figure 19-9 RJ45 Receptacle to DB9F DCE Adapter (PN 200.2072) ________________________97

Figure 19-10 RJ45 to RJ45 Adapter (ADP010104-01)____________________________________98

EDS-MD User Guide 13

List of Tables

Table 3-3 System LEDs on the Top of EDS-MD ________________________________________24

Table 3-4 Serial Indicator LEDs on the Top of EDS-MD __________________________________25

Table 3-5 RJ45 LEDs on the Back Panel (Ethernet Indicators). ____________________________25

Table 6-1 Line Configuration Settings ________________________________________________35

Table 6-2 Line Command Mode Settings ______________________________________________36

Table 6-3 Tunnel Serial Settings ____________________________________________________37

Table 6-4 Tunnel Packing Mode Settings _____________________________________________38

Table 6-5 Tunnel Accept Mode Settings ______________________________________________39

Table 6-6 Tunnel Connect Mode Settings _____________________________________________41

Table 6-7 Tunnel Disconnect Mode Settings ___________________________________________42

Table 6-8 Tunnel Modem Emulation Settings __________________________________________43

Table 7-1 Network Interface Settings _________________________________________________46

Table 7-2 Network 1 (eth0) Link Settings ______________________________________________48

Table 8-1 Terminal on Network and Line Settings _______________________________________49

Table 8-2 Host Configuration _______________________________________________________50

Table 9-1 DNS Settings ___________________________________________________________52

Table 9-2 FTP Settings ___________________________________________________________53

Table 9-3 Syslog Settings _________________________________________________________53

Table 9-4 HTTP Settings __________________________________________________________54

Table 9-5 HTTP Authentication Settings ______________________________________________55

Table 9-6 RSS Settings ___________________________________________________________56

Table 9-7 RTC Settings ___________________________________________________________57

Table 10-1 SSH Server Host Keys ___________________________________________________58

Table 10-2 SSH Client Known Hosts _________________________________________________59

Table 10-3 SSH Server Authorized Users _____________________________________________60

Table 10-4 SSH Client Users _______________________________________________________60

Table 10-5 Certificate and Key Generation Settings _____________________________________62

Table 10-6 Upload Certificate Settings _______________________________________________63

Table 10-7 Trusted Authority Settings ________________________________________________64

Table 11-1 File Display Settings ____________________________________________________65

Table 11-2 File Modification Settings _________________________________________________66

Table 11-3 File Transfer Settings ____________________________________________________66

Table 11-4 IP Network Stack Settings ________________________________________________67

Table 11-5 ICMP Network Stack Settings _____________________________________________68

Table 11-6 ARP Network Stack Settings ______________________________________________68

Table 11-7 SMTP Network Stack Settings _____________________________________________69

EDS-MD User Guide 14

Table 11-8 Query Port Settings _____________________________________________________69

Table 11-9 Ping Settings __________________________________________________________71

Table 11-10 Traceroute Settings ____________________________________________________71

Table 11-11 Log Settings __________________________________________________________72

Table 11-12 System Settings _______________________________________________________74

Table 12-1 Email Configuration _____________________________________________________75

Table 12-2 CLI Configuration Settings ________________________________________________76

Table 12-3 Telnet Settings ________________________________________________________77

Table 12-4 SSH Settings __________________________________________________________77

Table 12-5 XML Exporting Configuration ______________________________________________78

Table 12-6 Exporting Status ________________________________________________________79

Table 12-7 Import Configuration from Filesystem Settings ________________________________80

Table 14-1 VIP Configuration _______________________________________________________82

Table 14-2 VIP Counters __________________________________________________________83

Table 15-1 Short and Long Name Settings ____________________________________________85

Table 17-1 Binary to Hexadecimal Conversion _________________________________________87

Table 18-1 Applicable Medical Standards _____________________________________________89

Table 18-2 Applicable ITE Standards ________________________________________________89

Table 18-3 Regulatory Compliance __________________________________________________90

Table 19-1 Lantronix Cables and Adapters ____________________________________________93

EDS-MD User Guide 15

1: Using This Guide

Purpose and Audience

This guide provides the information needed to configure, use, and update the EDS-MD4, EDS-

MD8 and EDS-MD16. It is intended for system integrators who are installing this product into their

designs.

Note: EDS-MD device servers (which include models EDS-MD4, EDS-MD8 and

EDSMD16) are commonly referred to as either EDS-MD4/8/16 or as EDS-MD when

mentioned within a description equally applicable to any of the three models.

Summary of Chapters

The remaining chapters in this guide include:

Chapter Description

2: Introduction Main features of the product and the protocols it supports.

Includes technical specifications.

3: Installation of EDS-MD4/8/16 Device

Servers Instructions for installing the EDS-MD.

4: Using DeviceInstaller Instructions for viewing the current configuration using

DeviceInstaller.

5: Configuration Using Web Manager Instructions for accessing Web Manager and using it to configure

settings for the device.

7: Network Settings Instructions for configuring network settings.

6: Line and Tunnel Settings Instructions for configuring line and tunnel settings.

8: Terminal and Host Settings Instructions for configuring terminal and host settings.

9: Services Settings Instructions for configuring DNS, FTP, HTTP and Syslog settings.

10: Security Settings Instructions for configuring SSL security settings.

11: Maintenance and Diagnostics

Settings Instructions to maintain the EDS-MD, view statistics, files, and

diagnose problems.

12: Advanced Settings Instructions for configuring email, CLI and XML settings.

13: Updating Firmware Instructions for obtaining the latest firmware and updating the

EDS-MD.

14: VIP Settings Information about Virtual IP (VIP) features available on the device

and instructions on configuring settings.

15: Branding the EDS-MD4/8/16 Instructions on how to brand your device.

Appendix A: Technical Support Instructions for contacting Lantronix Technical Support.

Appendix B: Binary to Hexadecimal

Conversions Instructions for converting binary values to hexadecimals.

Appendix C: Compliance Lantronix compliance information.

Appendix D: Lantronix Cables,

Adapters and Serial Port Pinouts Information about the device driver for windows host.

1: Using This Guide

EDS-MD User Guide 16

Safety Information

This section describes the safety precautions that should be followed when installing and

operating the EDS-MD.

Warning: This equipment is not suitable for use in the presence of a flammable

anaesthetic mixture including air, oxygen or nitrous oxide.

Cover

Note: Refer all servicing to Lantronix.

Power Plug

When disconnecting the power cable from the socket, pull on the plug, not the cord.

Always connect the power cord to a properly wired and grounded power source. Do not use

adapter plugs or remove the grounding prong from the cord.

Only use a power cord with a voltage and current rating greater than the voltage and current

rating marked on the unit.

Note: Unit is shipped with a power cord for medical application.

Install the unit near an AC outlet that is easily accessible.

Always connect any equipment used with the product to properly wired and grounded power

sources.

To help protect the product from sudden, transient increases and decreases in electrical

power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).

Do not connect or disconnect this product during an electrical storm.

Input Supply

Check nameplate ratings to assure there is no overloading of supply circuits that could affect

over current protection and supply wiring.

Grounding

Maintain reliable grounding of this product.

Pay particular attention to supply connections when connecting to power strips, rather than

directly to the branch circuit.

Fuses

There are fuses on the internal power supply serviceable only by Lantronix.

Warning: Do not remove the cover of the EDS-MD. There are no user-serviceable

parts inside. Opening or removing the cover may expose you to

dangerous voltage that could cause fire or electric shock. Do not

operate the EDS-MD if the housing is broken.

1: Using This Guide

EDS-MD User Guide 17

Battery

A Lithium battery cell inside the unit maintains the unit's date and time when the device is powered

off. Do not attempt to replace it. The battery is serviceable only by Lantronix.

Caution: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.

REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER. DISPOSE OF USED

BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

Attention: IL Y A DANGER D'EXPLOSION S'IL Y A REMPLACEMENT INCORRECT

DE LA BATTERIE, REMPLACER UNIQUEMENT AVEC UNE BATTERIE

DU MÊME TYPE OU D'UN TYPE ÉQUIVALENT RECOMMANDÉ PAR LE

CONSTRUCTEUR. METTRE AU REBUT LES BATTERIES USAGÉES

CONFORMÉMENT AUX INSTRUCTIONS DU FABRICANT.

Wall Mounting

If wall-mounted units are installed, the following items must be considered:

Do not install the unit in such a way that a hazardous stability condition results because of

uneven loading. A drop or fall could cause injury.

Make sure to install the EDS-MD in an environment with an ambient temperature less than the

maximum operating temperature of the EDS-MD. Therefore, consideration should be given to

installing the equipment in an environment compatible with the maximum ambient temperature

(Tma) specified by the manufacturer.

Install the equipment on a wall in such a way that the amount of airflow required for safe

operation of the equipment is not compromised.

Maintain reliable earthing of wall-mounted equipment. Give particular attention to supply

connections other than direct connections to the branch circuit (e.g. use of power strips)

because of the effect that overloading of the circuits might have on overcurrent protection and

supply wiring. Appropriate consideration of equipment nameplate ratings should be used

when addressing this concern.

Before operating the EDS-MD, make sure the EDS-MD mounting is secured.

Port Connections

Only connect the network port to an Ethernet network that supports 10 Base-T/100 Base-TX/

1000 Base-T.

Only connect device ports to equipment with serial ports that support EIA-232 (formerly RS-

232C).

Unless specified otherwise, only connect USB ports to USB thumb drives.

Warning: To avoid overloading and overheating, do not use a USB port as a

charger port or a power port for other devices such as a cellular phone,

PDA device, disk drive, etc.

1: Using This Guide

EDS-MD User Guide 18

Equipment Classifications

Classification according to the type of protection against electric shock: Class I Equipment

Classification according to the degree of protection against electric shock: No Applied Parts

Classification according to the degree of protection against ingress of water: IP20

Classification according to the mode of operation: Continuous Operation

Environmental Conditions for Transportation and Storage

An ambient temperature range of -30°C to +80°C

A relative humidity range of 0% to 95%, noncondensing

An atmospheric pressure range of 50 kPa to 106 kPa

Cleaning Instructions

1. Disconnect all cables and unplug ac power from the device.

2. Prepare a disinfectant solution using 1 part bleach mixed with 9 parts water.

3. Lightly moisten a tissue with the mild detergent and wipe down only the outside of the device.

4. Allow the device to air-dry or wipe dry with a clean dry tissue before use.

Caution: To avoid electric shock and for the device to work properly, do not allow

cleaning solution get inside the device, specifically the interface port

connectors or the ac inlet. Do not immerse the device in any liquid.

Electromagnetic Interference

This equipment has been tested and found to comply with the EMC limits for the Medical Device

Directive 93/42/EEC (EN 55022 Class A and EN 60601-1-2). These limits are designed to provide

reasonable protection against harmful interference in a typical medical installation. The equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with these instructions, may cause harmful interference to other devices in the vicinity.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference with other devices, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

Reorient or relocate the receiving device

Increase the separation between the equipment

Connect the equipment into an outlet on a circuit different from that to which the other

device(s) is connected

Consult the manufacturer or field service technician for help

1: Using This Guide

EDS-MD User Guide 19

Additional Documentation

Visit the Lantronix Web site at www.lantronix.com/support/documentation for the latest

documentation and the following additional documentation.

Document Description

EDS-MD Command Reference Instructions for accessing Command Mode (the command line

interface) using a Telnet connection, SSH connection or through the

serial port. Detailed information about the commands. Also provides

details for XML configuration and status.

EDS-MD Quick Start Guide Instructions for getting the EDS-MD up and running.

DeviceInstaller Online Help Instructions for using the Lantronix Windows-based utility to locate the

EDS-MD and to view its current settings.

Com Port Redirector Quick Start

and Online Help Instructions for using the Lantronix Windows-based utility to create

virtual com ports.

Secure Com Port Redirector

User Guide Instructions for using the Lantronix Windows-based utility to create

secure virtual com ports.

EDS-MD User Guide 20

2: Introduction

The EDS-MD4, EDS-MD8 and EDS-MD16 Ethernet Device Servers are complete network-

enabling solutions. This device server allows system integrators and administrators to go to

market quickly and easily with Ethernet networking and web server capabilities. EDS-MD models

are available in 4, 8 and 16 port configurations.

Key Features

Power Supply: Direct plug-in to wall ac with universal 100-240 VAC input

Controller: 32-bit ARM11 microprocessor running at 600 megahertz (Mhz)

Memory: 64 megabit Flash, 2 gigabit DDR2 DRAM, and a 4 gigabyte SDHC card (internal

only-not user replaceable).

Ethernet: Gigabit Ethernet support (10/100/1000Base-T) speed auto-sensing, automatic MDI/

MDIX (straight and cross-over cables are OK to use)

Serial Ports: 4 to 16 ports depending on model (EDS-MD4, EDS-MD8 or EDS-MD16),

electrically isolated from one another and other circuits. Hardware/Software handshaking

capability. Custom/standard baud rates up to 921600 bits per second (bps).

USB ports: 2 ports of fixed full-speed 2.0 USB Host, electrically isolated from one another and

other circuits, capable of providing 0.5A each.

Temperature Range: 0°C to +55°C.

Applications

The EDS-MD4/8/16 device server connects serial devices such as those listed below to Ethernet

networks using the IP protocol family.

Patient Monitoring Devices

Glucose Analyzers

Infusion Pumps

Protocol Support

The EDS-MD4/8/16 device server contains a full-featured IP stack. Supported protocols include:

ARP, UDP, TCP, ICMP, DHCP, Auto IP, Telnet, SMTP, DNS, FTP, TFTP, and Syslog for

network communications and management.

TCP, UDP and tunneling to the serial port.

TFTP for uploading/downloading files.

FTP, SFTP, HTTPS and HTTP for firmware upgrades and uploading/downloading files.

Other manuals for EDS-MD EDS-MD4

This manual suits for next models

Table of contents

Other Lantronix Server manuals

Lantronix

Lantronix CoBox-Micro User manual

Lantronix

Lantronix xDirect User manual

Lantronix

Lantronix WiBox User manual

Lantronix

Lantronix I/O 2100 User manual

Lantronix

Lantronix SCS User manual

Lantronix

Lantronix xPico User manual

Lantronix

Lantronix EDS1100 Installation manual

Lantronix

Lantronix PremierWave XN User manual

Lantronix

Lantronix XPress DR+ Instruction Manual

Lantronix

Lantronix SCS100 User manual

Lantronix

Lantronix EDS4100 User manual

Lantronix

Lantronix Device Installer User manual

Lantronix

Lantronix CoBox E2 01 User manual

Lantronix

Lantronix EDS32PR User manual

Lantronix

Lantronix EDS32PR User manual

Lantronix

Lantronix MatchPort b/g Quick setup guide

Lantronix

Lantronix WiBox2100E User manual

Lantronix

Lantronix SecureBox SDS1100 User manual

Lantronix

Lantronix MSS1-T User manual

Lantronix

Lantronix UDS2100 User manual

Lantronix

Lantronix PremierWave XN User manual

Lantronix

Lantronix EDS3000PR User manual

Lantronix

Lantronix XPort Direct+ User manual

Lantronix

Lantronix SLC8 User manual

Popular Server manuals by other brands

Request

Request AudioReQuest Interface guide

AAxeon

AAxeon STW-601C user manual

Intplus

Intplus FlexWATCH 1110 user manual

Vidyo

Vidyo VidyoGateway Administrator's guide

HPE

HPE Cloudline CL2600 Gen10 User and maintenance guide

Thales

Thales SafeNet ProtectServer Network HSM 5.9 Installation and configuration guide

Lenovo

Lenovo ThinkServer TD230 Informacje dotyczące gwarancji i wsparcia

Dell

Dell 8 Installation

VSCOM

VSCOM ModGate Plus user manual

Point Six

Point Six OneSix user guide

HPE

HPE Edgeline EL300 Product End-of-Life Disassembly Instructions

Fujitsu

Fujitsu PRIMERGY TX200 S6 Options guide

Honeywell

Honeywell T320 Planning, installation and service guide

Orolia

Orolia VersaPNT user manual

SMC Sierra Monitor

SMC Sierra Monitor FieldServer FS-8700-122 PROFIBUS DP Master Driver manual

Asus

Asus RS260-E3 RS8 Service guide

DW Blackjack DX DW-BJDX31xxT quick start guide

Dell

Dell EMC DSS 9000R manual

Lantronix EDS-MD EDS-MD4 User manual

Popular Server manuals by other brands