Lantronix PremierWave EN User manual

Part Number 900-579
Revision D February 2013
PremierWave EN
User Guide

PremierWave EN User Guide 2
Copyright & Trademark
© 2013 Lantronix, Inc. All rights reserved. No part of the contents of this book may be transmitted
or reproduced in any form or by any means without the written permission of Lantronix.
Lantronix® and PremierWaveâ are registered trademarks and DeviceInstaller™ is a trademark of
Lantronix, Inc.
Windows® and Internet Explorer® are registered trademarks of Microsoft Corporation. Mozilla®
and Firefox® are registered trademarks of the Mozilla Foundation. Chrome™ is a trademark of
Google. Opera™ is a trademark of Opera Software ASA. Tera Termâ is a registered trademark of
Vector, Inc. All other trademarks and trade names are the property of their respective holders.
Warranty
For details on the Lantronix warranty policy, please go to our web site at
www.lantronix.com/support/warranty.
Contacts
Lantronix Corporate Headquarters
167 Technology Drive
Irvine, CA 92618, USA
Toll Free: 800-526-8766
Phone: [phone]
Fax: [phone]
Technical Support
Online: www.lantronix.com/support
Sales Offices
For a current list of our domestic and international sales offices, go to the Lantronix web site at
www.lantronix.com/about/contact.
Disclaimer
The information in this guide may change without notice. The manufacturer assumes no
responsibility for any errors that may appear in this guide.
Revision History
Date Rev. Comments
January 2011 A Initial Document.
July 2011 B Updated for release 7.2.0.0. Includes the new Bridging feature.
July 2011 C Added chapter on OEM branding capabilities.
February 2013 D Updated to firmware 7.3.0.1R7.

Table of Contents
List of Figures _____________________________________________________________9
List of Tables _____________________________________________________________10
1:Using This Guide 12
Purpose and Audience _____________________________________________________12
Summary of Chapters ______________________________________________________12
The remaining chapters in this guide include: ________________________________12
Additional Documentation ___________________________________________________13
2:Introduction 14
Key Features _____________________________________________________________14
Applications ______________________________________________________________15
Protocol Support _________________________________________________________15
Troubleshooting Capabilities _________________________________________________15
Configuration Methods _____________________________________________________16
Addresses and Port Numbers ________________________________________________16
Hardware Address _____________________________________________________16
IP Address ___________________________________________________________16
Port Numbers _________________________________________________________16
Product Information Label ___________________________________________________17
3:Using DeviceInstaller 18
Accessing PremierWave EN Using DeviceInstaller _______________________________18
Device Detail Summary _____________________________________________________18
4:Configuration Using Web Manager 20
Accessing Web Manager ___________________________________________________20
Device Status Page ____________________________________________________21
Web Manager Components _________________________________________________22
Navigating Web Manager ___________________________________________________23
5:Network Settings 25
Network Interface Settings __________________________________________________25
To Configure Network Interface Settings ____________________________________26
To View Network Interface Status _________________________________________27
Network Link Settings ______________________________________________________27
SmartRoam __________________________________________________________27
To Configure Network Link Settings ________________________________________29
WLAN Link Status and Scan Commands ____________________________________29

PremierWave EN User Guide 4
To View WLAN Link Scan and Status Information _____________________________30
WLAN Profiles ____________________________________________________________31
To Configure WLAN Profiles _____________________________________________31
To Configure WLAN Profile Basic Settings ___________________________________32
To Configure WLAN Profile Advanced Settings _______________________________33
WLAN Profile Security Settings ___________________________________________34
To Configure WLAN Profile Security Settings ________________________________35
WLAN Profile WEP Settings ______________________________________________35
To Configure WLAN Profile WEP Settings ___________________________________36
WLAN Profile WPA and WPA2/IEEE802.11i Settings __________________________36
To Configure WLAN Profile WPA and WPA/IEEE802.11i Settings ________________38
WLAN Quick Connect ______________________________________________________39
To Configure WLAN Quick Connect ________________________________________39
6:Line and Tunnel Settings 40
USB-CDC-ACM _______________________________________________________40
Line Settings _____________________________________________________________41
To Configure Line Settings _______________________________________________42
To View Line Statistics __________________________________________________43
Tunnel Settings ___________________________________________________________43
Serial Settings ________________________________________________________43
To Configure Tunnel Serial Settings ________________________________________44
Packing Mode _________________________________________________________44
To Configure Tunnel Packing Mode Settings _________________________________45
Accept Mode __________________________________________________________45
To Configure Tunnel Accept Mode Settings __________________________________47
Connect Mode ________________________________________________________48
To Configure Tunnel Connect Mode Settings ________________________________49
Disconnect Mode ______________________________________________________49
To Configure Tunnel Disconnect Mode Settings ______________________________50
Modem Emulation ______________________________________________________50
To Configure Tunnel Modem Emulation Settings ______________________________51
Statistics _____________________________________________________________51
To View Tunnel Statistics ________________________________________________52
7:Terminal and Host Settings 53
Terminal Settings _________________________________________________________53
To Configure the Terminal Network Connection _______________________________54
To Configure the Terminal Line Connection __________________________________54
Host Configuration ________________________________________________________54
To Configure Host Settings ______________________________________________55

PremierWave EN User Guide 5
8:Configurable Pin Manager 56
CPM: Configurable Pins ____________________________________________________56
CPM: Groups _________________________________________________________57
To Configure CPM Settings ______________________________________________58
9:Services Settings 59
DNS Settings _____________________________________________________________59
To View or Configure DNS Settings: _______________________________________59
FTP Settings _____________________________________________________________59
To Configure FTP Settings _______________________________________________60
Syslog Settings ___________________________________________________________60
To View or Configure Syslog Settings: ______________________________________60
HTTP Settings ____________________________________________________________61
To Configure HTTP Settings _____________________________________________62
To Configure HTTP Authentication _________________________________________63
RSS Settings _____________________________________________________________63
To Configure RSS Settings ______________________________________________63
SMTP Settings ___________________________________________________________64
To Configure SMTP Network Stack Settings _________________________________64
10:Security Settings 65
SSH Settings _____________________________________________________________65
SSH Server Host Keys __________________________________________________65
SSH Client Known Hosts ________________________________________________66
SSH Server Authorized Users ____________________________________________66
SSH Client Users ______________________________________________________67
To Configure SSH Settings ______________________________________________68
SSL Settings _____________________________________________________________68
Certificate and Key Generation ___________________________________________69
To Create a New Credential ______________________________________________69
Certificate Upload Settings _______________________________________________70
To Configure an Existing SSL Credential ____________________________________70
Trusted Authorities _____________________________________________________71
To Upload an Authority Certificate _________________________________________71
11:Maintenance and Diagnostics Settings 72
Filesystem Settings ________________________________________________________72
File Display ___________________________________________________________72
To Display Files _______________________________________________________72
File Modification _______________________________________________________73
File Transfer __________________________________________________________73
To Transfer or Modify Filesystem Files ______________________________________74

PremierWave EN User Guide 6
Protocol Stack Settings _____________________________________________________74
IP Settings ___________________________________________________________74
To Configure IP Network Stack Settings ____________________________________74
ICMP Settings _________________________________________________________75
To Configure ICMP Network Stack Settings __________________________________75
ARP Settings _________________________________________________________75
To Configure ARP Network Stack Settings __________________________________75
SMTP Settings ________________________________________________________76
To Configure ARP Network Stack Settings __________________________________76
Diagnostics ______________________________________________________________76
Hardware ____________________________________________________________76
To View Hardware Information ____________________________________________76
IP Sockets ___________________________________________________________77
To View the List of IP Sockets ____________________________________________77
Ping ________________________________________________________________77
To Ping a Remote Host _________________________________________________77
Traceroute ___________________________________________________________77
To Perform a Traceroute ________________________________________________78
Log _________________________________________________________________78
To Configure the Diagnostic Log Output ____________________________________78
Memory ______________________________________________________________79
To ViewMemory Usage _________________________________________________79
Processes ____________________________________________________________79
To View Process Information _____________________________________________79
Threads _________________________________________________________________79
To View Thread Information ______________________________________________79
System Settings __________________________________________________________80
To Reboot or Restore Factory Defaults _____________________________________80
Query Port _______________________________________________________________80
To Configure Query Port ________________________________________________81
12:Advanced Settings 82
Email Settings ____________________________________________________________82
To View, Configure and Send Email ________________________________________82
Command Line Interface Settings _____________________________________________83
Basic CLI Settings _____________________________________________________83
To View and Configure Basic CLI Settings ___________________________________83
Telnet Settings ________________________________________________________84
To Configure Telnet Settings _____________________________________________84
SSH Settings _________________________________________________________84
To Configure SSH Settings ______________________________________________85
XML Settings _____________________________________________________________85
XML: Export Configuration _______________________________________________85

PremierWave EN User Guide 7
To Export Configuration in XML Format _____________________________________86
XML: Export Status _____________________________________________________86
To Export in XML Format ________________________________________________86
XML: Import Configuration _______________________________________________87
Import Configuration from External File _____________________________________87
Import Configuration from the Filesystem ____________________________________87
To Import Configuration in XML Format _____________________________________87
13:Bridging 88
Bridging Configuration ______________________________________________________88
To configure and enable bridging: _________________________________________88
Bridging Operation ________________________________________________________89
Bridge Configuration _______________________________________________________89
To View or Configure Bridge Settings ______________________________________89
14:Security in Detail 91
Public Key Infrastructure ____________________________________________________91
TLS (SSL) _______________________________________________________________91
Digital Certificates _________________________________________________________91
Trusted Authorities ________________________________________________________91
Obtaining Certificates ______________________________________________________92
Self-Signed Certificates _____________________________________________________92
Certificate Formats ________________________________________________________92
OpenSSL ________________________________________________________________92
Steel Belted RADIUS ______________________________________________________93
Free RADIUS ____________________________________________________________93
15:Updating Firmware 94
Obtaining Firmware ________________________________________________________94
Loading New Firmware through FTP __________________________________________94
16:Branding the PremierWave EN 95
Web Manager Customization ________________________________________________95
Short and Long Name Customization __________________________________________96
To Customize Short or Long Names _______________________________________96
Appendix A:Technical Support 97
Appendix B:Binary to Hexadecimal Conversions 98
Converting Binary to Hexadecimal ____________________________________________98
Conversion Table ______________________________________________________98

PremierWave EN User Guide 8
Scientific Calculator ____________________________________________________98
Appendix C:Compliance 100
Appendix D:USB-CDC-ACM Device Driver File
for Windows Hosts 102

PremierWave EN User Guide 9
List of Figures
Figure 2-1 PremierWave ENProduct Label_____________________________________________17
Figure 4-1 Components of the Web Manager Page ______________________________________22

PremierWave EN User Guide 10
List of Tables
Table 5-1 Network Interface Settings _________________________________________________25
Table 5-2 Network 1 (eth0) Link Settings ______________________________________________27
Table 5-3 Network 2 (wlan0) Link Settings ____________________________________________28
Table 5-4 Network 2 Link Scan _____________________________________________________29
Table 5-5 Network 2 Link Scan Results on WebManager _________________________________29
Table 5-6 Network 2 Link Status ____________________________________________________30
Table 5-7 Creating, Deleting or Enabling WLAN Profiles __________________________________31
Table 5-8 WLAN Profile Basic Settings _______________________________________________32
Table 5-9 WLAN Profile Advanced Settings ___________________________________________33
Table 5-10 WLAN Profile Security Settings ____________________________________________34
Table 5-11 Additional WEP Settings for WLAN Profile. ___________________________________35
Table 5-12 WLAN Profile WPA and WPA2/IEEE802.11i Settings ___________________________37
Table 5-13 WLAN Quick Connect ___________________________________________________39
Table 6-1 Line Configuration Settings ________________________________________________41
Table 6-2 Line Command Mode Settings ______________________________________________42
Table 6-3 Tunnel Serial Settings ____________________________________________________43
Table 6-4 Tunnel Packing Mode Settings _____________________________________________44
Table 6-5 Tunnel Accept Mode Settings ______________________________________________46
Table 6-6 Tunnel Connect Mode Settings _____________________________________________48
Table 6-7 Tunnel Disconnect Mode Settings ___________________________________________50
Table 6-8 Tunnel Modem Emulation Settings __________________________________________50
Table 7-1 Terminal on Network and Line Settings _______________________________________53
Table 7-2 Host Configuration _______________________________________________________54
Table 8-1 Current Configurable Pins _________________________________________________56
Table 8-2 CP Status ______________________________________________________________56
Table 8-3 CPM Group Current Configuration ___________________________________________57
Table 8-4 CPM Group Status _______________________________________________________57
Table 9-1 DNS Settings ___________________________________________________________59
Table 9-2 FTP Settings ___________________________________________________________60
Table 9-3 Syslog Settings _________________________________________________________60
Table 9-4 HTTP Settings __________________________________________________________61
Table 9-5 HTTP Authentication Settings ______________________________________________62
Table 9-6 RSS Settings ___________________________________________________________63
Table 9-7 SMTP Network Stack Settings ______________________________________________64
Table 10-1 SSH Server Host Keys ___________________________________________________65
Table 10-2 SSH Client Known Hosts _________________________________________________66

PremierWave EN User Guide 11
Table 10-3 SSH Server Authorized Users _____________________________________________67
Table 10-4 SSH Client Users _______________________________________________________67
Table 10-5 Certificate and Key Generation Settings _____________________________________69
Table 10-6 Upload Certificate Settings _______________________________________________70
Table 10-7 Trusted Authority Settings ________________________________________________71
Table 11-1 File Display Settings ____________________________________________________72
Table 11-2 File Modification Settings _________________________________________________73
Table 11-3 File Transfer Settings ____________________________________________________73
Table 11-4 IP Network Stack Settings ________________________________________________74
Table 11-5 ICMP Network Stack Settings _____________________________________________75
Table 11-6 ARP Network Stack Settings ______________________________________________75
Table 11-7 SMTP Settings _________________________________________________________76
Table 11-8 Ping Settings __________________________________________________________77
Table 11-9 Traceroute Settings _____________________________________________________78
Table 11-10 Log Settings __________________________________________________________78
Table 11-11 System Settings _______________________________________________________80
Table 11-12 Query Port Settings ____________________________________________________80
Table 12-1 Email Configuration _____________________________________________________82
Table 12-2 CLI Configuration Settings ________________________________________________83
Table 12-3 Telnet Settings ________________________________________________________84
Table 12-4 SSH Settings __________________________________________________________84
Table 12-5 XML Exporting Configuration ______________________________________________85
Table 12-6 Exporting Status ________________________________________________________86
Table 12-7 Import Configuration from Filesystem Settings ________________________________87
Table 13-1 Bridge Settings _________________________________________________________89
Table 16-1 Short and Long Name Settings ____________________________________________96

PremierWave EN User Guide 12
1: Using This Guide
Purpose and Audience
This guide provides the information needed to configure, use, and update the PremierWave EN. It
is intended for software developers and system integrators who are embedding this product into
their designs.
Summary of Chapters
The remaining chapters in this guide include:
Chapter Description
2: Introduction Main features of the product and the protocols it supports.
Includes technical specifications.
3: Using DeviceInstaller Instructions for viewing the current configuration using
DeviceInstaller.
4: Configuration Using Web Manager Instructions for accessing Web Manager and using it to configure
settings for the device.
5: Network Settings Instructions for configuring network settings.
6: Line and Tunnel Settings Instructions for configuring line and tunnel settings.
7: Terminal and Host Settings Instructions for configuring terminal and host settings.
8: Configurable Pin Manager Information about the Configurable Pin Manager (CPM) including
how to set the configurable pins to work with a device and
instructions for accessing Web Manager and using it to configure
settings for the device.
9: Services Settings Instructions for configuring DNS, FTP, HTTP and Syslog settings.
10: Security Settings Instructions for configuring SSL security settings.
11: Maintenance and Diagnostics
Settings Instructions to maintain the PremierWave, view statistics, files,
and diagnose problems.
12: Advanced Settings Instructions for configuring email, CLI and XML settings.
13: Bridging Instructions for bridging configuration.
14: Security in Detail Provides additional information on security settings available.
15: Updating Firmware Instructions for obtaining the latest firmware and updating the
PremierWave.
16: Branding the PremierWave EN Instructions on how to brand your device.
Appendix A: Technical Support Instructions for contacting Lantronix Technical Support.
Appendix B: Binary to Hexadecimal
Conversions Instructions for converting binary values to hexadecimals.
Appendix C: Compliance Lantronix compliance information.
Appendix D: USB-CDC-ACM Device
Driver File for Windows Hosts Information about the device driver file for windows host.

1: Using This Guide
PremierWave EN User Guide 13
Additional Documentation
Visit the Lantronix Web site at www.lantronix.com/support/documentation for the latest
documentation and the following additional documentation.
Document Description
PremierWave EN Integration
Guide Information about the PremierWave hardware, testing the PremierWave using the demonstration board, and integrating the
PremierWave into your product.
PremierWave EN Command
Reference Instructions for accessing Command Mode (the command line interface) using a Telnet connection, SSH connection or through the
serial port. Detailed information about the commands. Also provides
details for XML configuration and status.
PremierWave EN Eval Board
Quick Start Guide Instructions for getting the PremierWave up and running.
PremierWave Eval Board User
Guide Information needed to use the PremierWave on the evaluation board.
DeviceInstaller Online Help Instructions for using the Lantronix Windows-based utility to locate the
PremierWave and to view its current settings.
Com Port Redirector Quick Start
and Online Help Instructions for using the Lantronix Windows-based utility to create virtual com ports.

PremierWave EN User Guide 14
2: Introduction
The PremierWave EN embedded Ethernet Device Server is a complete network-enabling solution
in a 30 (1.181) X 55 (2.165) X 6.45 (0.248) package. This miniature device server empowers
original equipment manufacturers (OEMs) to go to market quickly and easily with Ethernet and/or
wireless networking and web page serving capabilities built into their products. [DIMS = mm (in.)]
XSO21A200-01-S
XSO21R200-01-S
Key Features
Power Supply: Regulated 3.3V input required. There is a step-down converter to 1.5V for the
processor core and 1.8V for the memory subsystem. All voltages have LC filtering to minimize
noises and emissions.
Controller: 32-bit ARM9 microprocessor running at 400 megahertz (Mhz) with 32 KB Data
Cache and 32 Kilobytes (KB). Instruction Cache
Memory:Up to 64 MB SDRAM, 256 MB and Flash, and (Default 64 MB each). Up to 16 MB
serial SPI Flash (Default 8 MB).
Ethernet: 10/100 megabits per second (Mbps) Ethernet transceiver.Wireless: Dual Band
802.11 a/b/g/n with an on-board antenna and option for external antennas and diversity.
Serial Ports: Two high speed RS232/RS422/RS485 serial ports with all hardware
handshaking signals. Baud rate is software selectable (300 bps to 921600 bps). One
emulated serial port on the USB Device Port (up to Full Speed 12 Mbps), using standard CDC-
ACM protocol.
USB Ports: Two USB 2.0 full speedOne USB 2.0 Full Speed (12 Mbps) host device port
Master/Slave high speed SPI interface
I2C interface
Configurable I/O Pins (CPs): Up to nine pins are configurable as general purpose I/Os if no
DTR or DCD is used on serial ports. Not 5V tolerant.
Interface Signals: 3.3V-level interface signals.
Configuration via CLI, XML and HTTP
Ethernet to wireless tunneling
Lantronix SmartRoam technology
Temperature Range:Operates over a temperature range of -40°C to +85°C (-40°F to 158°F).
The storage temperature range is -40°C to 85°C (-40°F to 185°F).

2: Introduction
PremierWave EN User Guide 15
Applications
The PremierWave EN device server connects serial devices such as those listed below to
Ethernet networks using the IP protocol family.
ATM machines
CNC controllers
Data collection devices
Universal Power Supply (UPS) management unit
Telecommunications equipment
Data display devices
Security alarms and access control devices
Handheld instruments
Modems
Time/attendance clocks and terminals
Patient Monitoring Devices
Glucose Analyzers
Infusion Pumps
Protocol Support
The PremierWave EN device server contains a full-featured IP stack. Supported protocols include:
ARP, SNMP v1/v2c/v3, IP, UDP, TCP, ICMP,BOOTP, DHCP, Auto IP, Telnet, FTP, FTPS,
DNS, TFTP, SSH, SSL/TLS, and Syslog for network communications and management.
TCP, UDP, SSH, SSL and telnet tunneling to the serial port.
TFTP for uploading/downloading files.
FTP and HTTP/HTTPS for firmware upgrades and uploading/downloading files.
SMTP AUTH, HTTP/HTTPS Post, FTP/FTPS Put and SNMP Traps
Troubleshooting Capabilities
The PremierWave EN offers a comprehensive diagnostic toolset that lets you troubleshoot
problems quickly and easily. Available from the CLI or Web Manager, the diagnostic tools let you:
View memory and IP socket information.
Perform ping and traceroute operations.
Conduct forward or reverse DNS lookup operations.
View all processes currently running on the PremierWave EN, including CPU utilization.
View system log messages.

2: Introduction
PremierWave EN User Guide 16
Configuration Methods
After installation, the PremierWave EN requires configuration. For the unit to operate correctly on
a network, it must have a unique IP address on the network. There are four basic methods for
logging into the PremierWave EN and assigning IP addresses and other configurable settings:
Web Manager: View and configure all settings easily through a web browser using the
Lantronix Web Manager. (See “Configuration Using Web Manager” on page 20.)
DeviceInstaller: Configure the IP address and related settings and view current settings on
the PremierWave EN using a Graphical User Interface (GUI) on a PC attached to a network.
You will need the latest version of DeviceInstaller. (See “Using DeviceInstaller” on page 18.)
Command Mode: There are two methods for accessing Command Mode (CLI): making a
Telnet or SSH connection, or connecting a PC or other host running a terminal emulation
program to the unit’s USB port. (See the PremierWave EN Command Reference Guide for
instructions and available commands.)
XML: The PremierWave EN supports XML-based configuration and setup records that make
device configuration transparent to users and administrators. XML is easily editable with a
standard text or XML editor. (See the PremierWave EN Command Reference Guide for
instructions and commands.)
Addresses and Port Numbers
Hardware Address
The hardware address is also referred to as the Ethernet address, physical address, or MAC
address. Sample hardware address:
00-80-A3-14-1B-18
00:80:A3:14:1B:18
IP Address
Every device connected to an IP network must have a unique IP address. This address references
the specific unit.
Port Numbers
Every TCP connection and every UDP datagram is defined by a destination and source IP
address, and a destination and source port number. For example, a Telnet server commonly uses
TCP port number 23.
The following is a list of the default server port numbers running on the PremierWave EN:
TCP Port 22: SSH Server (Command Mode configuration)
TCP Port 23: Telnet Server (Command Mode configuration)
TCP Port 80: HTTP (Web Manager configuration)
TCP Port 21: FTP
UDP Port 30718: LDP (Lantronix Discovery Protocol) port
TCP/UDP Port 10001: Tunnel 1 (see note below)

2: Introduction
PremierWave EN User Guide 17
UDP Port 1900 and TCP Port 30179: UPnP
Note: Additional TCP/UDP ports and tunnels will be available, depending on the product
type. The default numbering of each additional TCP/UDP port and corresponding tunnel
will increase sequentially (i.e., TCP/UDP Port 1000X: Tunnel X).
Product Information Label
The product information label on the unit contains the
following information about the specific unit:
Bar code
Product Revision
Part Number
Hardware Address(MAC Address)
Manufacturing Date Code
Figure 2-1 PremierWave ENProduct Label
Note: The hardware address on the
label is also the product serial number.
The hardware address on the label is the
address for the Ethernet (eth0) interface.
The WLAN (wlan0) interface uses the
Ethernet address "+1". For example, if
the product label hardware address is
00-80-A3-14-1B-18, then the Ethernet
address is 00-80-A3-14-1B-18 and the
WLAN address is 00-80-A3-14-1B-19.
Bar Code
MAC Address
Part Number
Country of Origin
& Manufacture
Revision
Manufacturing
Date Code

PremierWave EN User Guide 18
3: Using DeviceInstaller
This chapter covers the steps for locating a PremierWave EN unit and viewing its properties and
device details. DeviceInstaller is a free utility program provided by Lantronix that discovers,
configures, upgrades and manages Lantronix Device Servers.
Notes:
For instructions on using DeviceInstaller to configure the IP address and related
settings or for more advanced features, see the DeviceInstaller Online Help.
Auto IP generates a random IP address in the range of 169.254.0.1 to
169.254.255.254, with a netmask of 255.255.0.0, if no BOOTP or DHCP server is
found. These addresses are not routable.
Accessing PremierWave EN Using DeviceInstaller
Note: Make note of the MAC address. It is needed to locate the PremierWave EN using
DeviceInstaller.
To use the DeviceInstaller utility, first install the latest version from the downloads page on the
Lantronix web site www.lantronix.com/downloads.
1. Run the executable to start the installation process and respond to the installation wizard
prompts. (If prompted to select an installation type, select Typical.)
2. Click Start -> All Programs -> Lantronix -> DeviceInstaller -> DeviceInstaller.
3. When DeviceInstaller starts, it will perform a network device search. To perform another
search, click Search.
4. Expand the PremierWave folder by clicking the + symbol next to the folder icon. The list of
available Lantronix PremierWave EN devices appears.
5. Select the PremierWave EN unit by expanding its entry and clicking on its IP address to view
its configuration.
6. On the right page, click the Device Details tab. The current PremierWave EN configuration
appears. This is only a subset of the full configuration; the full configuration may be accessed
via Web Manager, CLI or XML.
Device Detail Summary
Note: The settings are Display Only in this table unless otherwise noted
Current Settings Description
Name Shows PremierWave”.
DHCP Device Name The name associated with the PremierWave’s current IP address, if the IP
address was obtained dynamically.

3: Using DeviceInstaller
PremierWave EN User Guide 19
Group
Configurable field. Enter a group to categorize the PremierWave. Double-
click the field, type in the value, and press Enter to complete. This group
name is local to this PC and is not visible on other PCs or laptops using
DeviceInstaller.
Comments
Configurable field. Enter comments for the PremierWave. Double-click the
field, type in the value, and press Enter to complete. This description or
comment is local to this PC and is not visible on other PCs or laptops using
DeviceInstaller.
Device Family Shows the PremierWave device family type as “PremierWave ”.
Short Name Shows ”premierwave_en” by default
Long Name Shows ”PremierWave EN” by default
Type Shows the device type as “PremierWave””.
ID Shows the PremierWave ID embedded within the unit.
Hardware Address Shows the PremierWave hardware (MAC) address.
Firmware Version Shows the firmware currently installed on the PremierWave.
Extended Firmware Version Provides additional information on the firmware version.
Online Status Shows the PremierWave status as Online, Offline, Unreachable (the
PremierWave is on a different subnet), or Busy (the PremierWave is
currently performing a task).
IP Address Shows the PremierWave current IP address. To change the IP address,
click the Assign IP button on the DeviceInstaller menu bar.
IP Address was Obtained Appears “Dynamically” if the PremierWave automatically received an IP
address (e.g., from DHCP). Appears “Statically” if the IP address was
configured manually.
If the IP address was assigned dynamically, the following fields appear:
Obtain via DHCP with values of True or False.
Obtain via BOOTP with values of True or False.
Subnet Mask Shows the subnet mask specifying the network segment on which the
PremierWave resides.
Gateway Shows the IP address of the router of this network.
There is no default.
Number of Serial Ports Shows the number of serial inputs on the PremierWave.
Supports Configurable Pins Shows True, indicating configurable pins are available on the PremierWave.
Supports Email Triggers Shows True, indicating email triggers are available on the PremierWave.
Telnet Supported Indicates whether Telnet is enabled on this PremierWave.
Telnet Port Shows the PremierWave port for Telnet sessions.
Web Enabled Indicates whether Web Manager access is enabled on this PremierWave.
Web Port Shows the PremierWave port for Web Manager configuration (if Web
Enabled field is True).
Firmware Upgradable Shows True, indicating the PremierWave firmware is upgradable as newer
versions become available.
Current Settings Description

PremierWave EN User Guide 20
4: Configuration Using Web Manager
This chapter describes how to configure PremierWave EN using Web Manager, the Lantronix
browser-based configuration tool. The unit’s configuration is stored in nonvolatile memory and is
retained without power. All changes take effect immediately, unless otherwise noted. It contains
the following sections:
Accessing Web Manager
Web Manager Components
Navigating Web Manager
Accessing Web Manager
Note: You can also access the Web Manager by selecting the Web Configuration tab on
the DeviceInstaller window.
To access Web Manager, perform the following steps:
1. Open a standard web browser. Lantronix supports the latest version of Internet Explorer,
Mozilla Suite, Mozilla Firefox, Safari, Chrome or Opera.
2. Enter the IP address or hostname of the PremierWave EN in the address bar. The IP address
may have been assigned manually using DeviceInstaller (see the PremierWave EN
Evaluation Board Quick Start Guide) or automatically by DHCP.
3. Enter your username and password.The factory-default username is “admin” and the
password is “PASS”. The Device Status web page displays configuration, network settings,
line settings, tunneling settings, and product information.
Note: The Logout button is available on any web page. Logging out of the web page
would force re-authentication to take place the next time the web page is accessed.