Larson Electronics LE-2206-LED User manual

Part # LE-2206-LED
Larson Electronics, LLC Phone: [phone] Fax: [phone] www.larsonelectronics.com
1of 2
LE-2206-LED
Waterproof/Explosion Proof Light
Waterproof/Explosion Proof LED Light
Instruction Manual
Thank you for your purchase of the Waterproof/Explosion Proof LED Flashlight, the following instructions are intended for
this part number only.
Battery Replacement and Operation
•To place/replace your battery, begin by unscrewing the lens ring.
•Next pull out the bulb housing from the light body.
•You can now insert your battery and replace the bulb housing to
begin use.
•Press the switch located on the top of the handle to turn on/off the
light.

Part # LE-2206-LED
Larson Electronics, LLC Phone: [phone] Fax: [phone] www.larsonelectronics.com
2of 2
Safety Warnings and Ratings.
For personal safety, always follow the safety instructions in this manual to ensure safe and long- term use. Failing
to do so can result in damage to the product or serious bodily injury
Warnings
To prevent serious damage to eyesight, never
look into spotlight when light is on. DO NOT
shine light into the face of someone else.
DO NOT touchlensof spotlightwhenlight is on
or if it was recently on. The lens will be hot and
could cause serious burns.
DO NOT allow children to handle or operate
this light.
DO NOT use this product for other than its
intended use.
DO NOT operate in close proximity of
Combustible or flammable materials.
DONOTattempttooperatethislight if cord,
plug, battery, bulb or any part of the light is
damaged or corroded.
Safety Rating:
UL CUL: Class I, Division 1, Groups C & D
Class II, Division 1, Group G
Operating Temp T3B
CSA: Class I, Division 1, Groups C & D
Class II, Division 1, Group G
Operating Temp T3A
ASTM MSHA Approved
For info on warranty and returns please visit our website: www.Larsonelectronics.com