Larson Electronics ATEX-EHL-1123-LED-50-EPP User manual

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Operating instructions
EN
Inspection Light LED
ATEX-EHL-1123-LED-50-EPP

2Inspection Light LED
ATEX-EHL-1123-LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Contents
1 General Information ............................................................................................3
1.1 Manufacturer .......................................................................................................3
1.2 Information regarding the operating instructions .................................................3
1.3 Conformity with standards and regulations .........................................................3
2 Explanation of the symbols .................................................................................3
2.1 Symbols in these operating instructions .............................................................3
2.2 Warning notes .....................................................................................................4
2.3 Symbols on the device ........................................................................................4
3 Safety notes ........................................................................................................4
3.1 Operating instructions storage ............................................................................4
3.2 Safe use ..............................................................................................................5
3.3 Modifications and alterations ..............................................................................5
4 Function and device design ................................................................................5
5 Technical data .....................................................................................................6
6 Transport and storage .........................................................................................7
7 Mounting and installation ....................................................................................8
7.1 Dimensions / fastening dimensions ....................................................................8
7.2 Mounting / dismounting, operating position ........................................................9
7.3 Installation ...........................................................................................................9
8 Commissioning .................................................................................................10
9 Maintenance and repair ....................................................................................10
9.1 Maintenance .....................................................................................................10
9.2 Repair ...............................................................................................................11
9.3 Returning the device .........................................................................................11
10 Disposal ............................................................................................................11
11 Accessories and Spare parts ...........................................................................11

Larson Electronics, LLC.
[phone] | [email protected]
www.LarsonElectronics.com
General Information
3
Inspection Light LED
ATEX-EHL-1123-LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
1 General Information
1.1 Manufacturer
1.2 Information regarding the operating instructions
ATEX-EHL-1123-LED-50-EPPID-No.:
The original instructions are the English edition.
They are legally binding in all legal affairs.
1.3 Conformity with standards and regulations
See certificates and EC Declaration of Conformity.
2 Explanation of the symbols
2.1 Symbols in these operating instructions
Larson Electronics, LLC.
9419 US-HWY 175
Kemp, Texas 75143
U.S.A.
Phone:
Fax:
Internet:
E-mail:
800-369-6671
903-498-3364
www.larsonelectronics.com
[email protected]
Symbol Meaning
Tips and recommendations on the use of the device
General danger
Danger due to explosive atmosphere
Danger due to energised parts

Safety notes
4Inspection Light LED
ATEX-EHL-1123-LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
2.2 Warning notes
Warning notes must be observed under all circumstances, in order to minimize the risk
due to construction and operation. The warning notes have the following structure:
• Signalling word: DANGER, WARNING, CAUTION, NOTICE
• Type and source of danger/damage
• Consequences of danger
• Taking countermeasures to avoid the danger/damage
2.3 Symbols on the device
3 Safety notes
3.1 Operating instructions storage
• Read the operating instructions carefully and store them at the mounting location of
the device.
• Observe applicable documents and operating instructions of the devices to be
connected.
DANGER
Danger to persons
Non-compliance with the instruction results in severe or fatal injuries to
persons.
WARNING
Danger to persons
Non-compliance with the instruction can result in severe or fatal injuries to
persons.
CAUTION
Danger to persons
Non-compliance with the instruction can result in light injuries to persons.
NOTICE
Avoiding material damage
Non-compliance with the instruction can result in material damage to the device and / or
its environment.
Symbol Meaning
05594E00
CE marking according to the currently applicable directive.
02198E00
According to marking, device approved for hazardous areas.
Larson Electronics, LLC.
[phone] | [email protected]
www.LarsonElectronics.com

Function and device design
5
Inspection Light LED
ATEX-EHL-1123-LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
3.2 Safe use
• Read and observe the safety notes in these operating instructions!
• Observe characteristic values and rated operating conditions on the rating and data
plates!
• Observe additional information plates on the device!
• Use the device in accordance with its intended and approved purpose only!
• We cannot be held liable for damage caused by incorrect or unauthorized use or by
non-compliance with these operating instructions.
• Before installation and commissioning, make sure that the device is not damaged!
• Work on the device (installation, maintenance, overhaul, repair) may only becarried
out by appropriately authorized and trained personnel.
3.3 Modifications and alterations
4 Function and device design
The device can be used in hazardous areas of Zones 1, 2, 21, 22 and in the safe area.
The inspection light 6149 is designed for use as a portable workplace light. The optional
mounting brackets allow the inspection light to also be used as a machine light.
DANGER
Explosion hazard due to modifications and alterations to the device!
Non-compliance results in severe or fatal injuries.
• Do not modify or alter the device. No liability or warranty for damage
resulting from modifications and alterations.
WARNING
Danger if used in aggressiv ambient conditions!
The explosion protection is impaired!
• Do not use when exposed to kerosene, ammonia and phosphorus
vapour.
• The enclosure can be damaged.
DANGER
Explosion hazard due to improper use!
Non-compliance results in severe or fatal injuries.
• Use the device only according to the operating conditions described in
these operating instructions.
Larson Electronics, LLC.
[phone] | [email protected]
www.LarsonElectronics.com

Technical data
6Inspection Light LED
ATEX-EHL-1123-LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
5 Technical data
Explosion Protection
Global (IECEx)
Gas and dust IECEx PTB 07.0018
Ex d IIC T* Gb
Ex tb IIIC T* °C Db
*temperature classes and surface temperatures see below
Europe (ATEX)
Gas and dust PTB 07 ATEX 1009
EII 2 G Ex d IIC T* Gb
EII 2 D Ex tb IIIC T* °C Db
*temperature classes and surface temperatures see below
Certifications and certificates
CertificatesIECEx, ATEX, Brazil (INMETRO), Kazakhstan (TR), Russia (TR), Belarus (TR)
Surface temperature and temperature class
Technical Data
Electrical data
Version
Rated operational
voltage
(110 ... 240 V) 110 ...
240 (± 10 %) V AC /
DC, 50 / 60 Hz
Nominal operational
current
Luminous
characteristics
Version 6149/2-5 (110 ... 240 V)
Lamps LED
Luminous flux approx. 1,000 lm
Luminous Intensity285 lux in 1 m distance
VersionTemperature class Surface temperature
ATEX-EHL-1123..-....T4 100 °C
110 V 0.13 A
240 V 0.07 A
Larson Electronics, LLC.
[phone] | [email protected]
www.LarsonElectronics.com

Transport and storage
7
Inspection Light LED
ATEX-EHL-1123-LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
6 Transport and storage
• Transport and store the device only in the original packaging.
• Store the device in a dry place (no condensation) and vibration-free.
• Do not drop the device.
Ambient conditions
Ambient temperature
The luminaire must be switched on above -40 °C.
Mechanical data
Degree of protection IP66 / IP67
Protection class II
Material
Enclosure tube Polycarbonate
GripAluminium
Sealing cap Aluminium
Rubber grip NBR / PVC (EPDM)
Suspension hook NBR / PVC (EPDM)
Mounting / Installation
Cable glands CMP cable gland for rubbercase-, Thermflex- and wire mesh lead
Connection line
Technical Data
Cable 6149/2-2
(12V)
6149/2-3
(24 ... 48 V)
6149/2-5
(110 ... 240 V)
H07RN-F;
2 x 1,5 mm2
T4
T6
-40 ... +40 °C -40 ... +60 °C
-40 ... +40 °C
-30 ... +60 °C
-30 ... +40 °C
HXSLHXÖ-J;
2 x 1,5 mm2
T4
T6
-40 ... +40 °C -40 ... +60 °C
-40 ... +40 °C
-30 ... +60 °C
-30 ... +40 °C
(N)SSHÖU 1kV;
2 x 1,5 mm2
T4
T6
-40 ... +40 °C -40 ... +60 °C
-40 ... +40 °C
-30 ... +60 °C
-30 ... +40 °C
RADOX, MFH-S B;
2 x 1,5 mm2
T4
T6
-40 ... +40 °C -40 ... +60 °C
-40 ... +40 °C
-30 ... +60 °C
-30 ... +40 °C
Designation Application
H07RN-F, d8.8 ... 11 mm, 2 x 1.5 mm2Standard
Gifas Thermflex cable, HXSLHXÖ-J, d7.7 ... 10 mm,
2 x 1.5 mm2
(N)SSHÖU 1kV, d8.7 ... 9 mm, 2 x 1.5 mm2Voltage-proof up to
1kV
RADOX, MFH-S B, d6 ... 7 mm, 2 x 1.5 mm2Offshore
Larson Electronics, LLC.
[phone] | [email protected]
www.LarsonElectronics.com

Mounting and installation
8Inspection Light LED
ATEX-EHL-1123-LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
7 Mounting and installation
7.1 Dimensions / fastening dimensions
DANGER
Explosion hazard due to incorrect installation of the device!
Non-compliance results in severe or fatal injuries.
• Carry out installation strictly according to the instructions and national
safety and accident prevention regulations to maintain the explosion
protection.
• Select and install the electrical device so that explosion protection is not
affected due to external influences, i.e. pressure conditions, chemical,
mechanical, thermal and electric impact such as vibration, humidity and
corrosion (see IEC/EN 60079-14).
• The device must only be installed by trained qualified personnel who is
familiar with the relevant standards.
Dimensional Drawings (All Dimensions in mm [inches]) - Subject to Alterations
03714E0004925E00
Inspection light without wire guard Inspection light with wire guard
00E7294000E62940
Mounting bracket Mounting bracket and
magnet
595 23,43[ ]
302 11,89[ ]
Ø
04
Ø[
]75,1
Ø
25
Ø[
]50,2
180 [7,09]
Ø
62
[Ø
2,44]
302 11,89[ ]
Ø
04
Ø[
]75,1
Ø
25
Ø[
]50,2
595 23,43[ ]
180 [7,09]
Ø
62
[Ø
2,44]
4
Ø
54,50 [2,15]
]51,3[08 07,21
]05,0[
15 [0,59]
[ 0,16]
Ø
54,50 [2,15]
]64,3[88
Ø 25
[Ø 0,98]
07,21
]05,0[
Larson Electronics, LLC.
[phone] | [email protected]
www.LarsonElectronics.com

Mounting and installation
9
Inspection Light LED
ATEX-EHL-1123-LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
7.2 Mounting / dismounting, operating position
7.2.1 Wire Guard Assembly
7.2.2 Wall mounting
7.3 Installation
7.3.1 Electrical connections
• Installation of the plugs should be performed in accordance with the corresponding
operating instructions.
05337E00
• remove the suspension hook (4) from
the enclosure tube (2).
• push the wire guard (3) over the
enclosure tube.
• push the first coil of the wire guard
over the lip of the grip (1)
• push the suspension hook back onto
the enclosure tube and push the last
coil of the wire guard over the lip of
the suspension hook when doing so.
• wire guard is now fitted.
05342E00
• fix the mounting brackets to the
wall at a spacing distance of
360 mm.
• clip the inspection light into the
mounting brackets.
• wall mounting is complete.
WARNING
Danger due to wrong plugs!
The explosion protection is impaired!
• Only use plugs, which are approved for use in the relevant zone.
The light is delivered with a connection cable. A standard CE connector must
be used for operation. When selecting the connector observe the IP level of
protection!
All versions can be operated with a cable length of up to 100 m.
It is not permitted to extend the connection cable.
1
2
3
4
360 mm / 14,17 "
Larson Electronics, LLC.
[phone] | [email protected]
www.LarsonElectronics.com

Commissioning
10 Inspection Light LED
ATEX-EHL-1123-LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
8 Commissioning
• Make sure that the plug is fitted correctly.
• Check that the cable is clamped properly.
• Inspect cable glands for damage.
• Check the light for visible damage.
9 Maintenance and repair
9.1 Maintenance
• Determine the type and extent of inspections in compliance with the relevant national
regulations.
• Adapt inspection intervals to the operating conditions.
The following tests and measures must be carried out during regular maintenance.
DANGER
Explosion hazard due to incorrect installation!
Non-compliance results in severe or fatal injuries.
• Check the device for proper installation and function before
commissioning.
• Comply with the national regulations.
WARNING
Risk of electric shock or malfunctioning of the device due to unauthorized
work!
Non-compliance can result in severe injuries and material damage.
• Work performed on the device must only be carried out by appropriately
authorized and qualified electricians.
Observe the relevant national regulations in the country of use.
Check Measures
the permissible ambient temperature If exceeding the permissible ambient
temperature or falling below the device
must be taken out of operation.
the enclosure components for formation of
cracks and damage.
Replace the exchangeable enclosure
components. If the enclosure components
are non-exchangeable, the device must be
taken out of operation.
siecivedehtfIesudednetnisti not used according to its
intended use, it must be taken out of
operation.
Larson Electronics, LLC.
[phone] | [email protected]
www.LarsonElectronics.com