Laser SPK-BTF440 User guide

QUICK OPERATION GUIDE
SPK-BTF440
MAIN CONTROL BUTTONS
Key
Name
Function
Key
Name
Function
1 Mode
button
SHORT press
to change
modes
3 Up Button
LONG
press to
increase
volume
SHORT
press to
go to next
song / radio station
2 Down
Button
LONG
press
to decrease
volume
4 Play/Pause
button
SHORT press to
Play/Pause music playback
SHORT press
to go to
previous song
/ radio station
(Radio mode)
SHORT
press
to auto-search and store
all available radio stations
(
Bluetooth mode
)
Press to
answer, or hang-up from a
phone call
1 2 3 4

QUICK OPERATION GUIDE
SPK-BTF440
BLUETOOTH MODE – HOW TO CONNECT
1) Turn your radio and other Smartphone/tablet on
2) Turn the Bluetooth function on, on your Smartphone/tablet and search for new
Bluetooth devices.
3) Once the device named “SPK-BTF440” is found, connect to it modes
(If a password is required, simply enter “0000” (four zeros)).
BACK PANEL CONNECTIONS
1
USB Socket
3
On / Off Button
2
Micro SD Card Slot
4
Micro USB socket (for charging)
SPECIFICATIONS
Indicator Lamp
Blue:
I
ndicates music
playback
Red: Indicates charging mode. This red indicator
will turn off when charging is complete.
USB Socket
S
upport
s
up to
32G
B
flash drive
s
Compatible with MP3 music files only
Micro SD Card Slot
S
upport
s
up to
32G
B
Compatible with MP3 music files only
Charging Alarm
An audio low
-
battery alarm will sound when your
radio needs charging. Please connect your radio to
any standard 5V USB charging port to charge.
Charging
V
oltage
Input:
5V,
1A
Dimensions
112
x
82
x 4
0mm
Package includes: USB Charging Cable, Quick Guide (this document)
For further product information and instructions please visit our product web page at
www.laserco.com.au or email www.laserco.com.au/supports/email.php
Please note: As continuous improvements are made to this product, slight operational differences
may occur. For the most up-to-date user manual, please visit our web site.
1
2
3
4
RADIO MODE
Note: The USB cable acts
as an antenna in this
mode. Please make sure it
is plugged in while in use.

QUICK OPERATION GUIDE SPK-BTF440
Warranty Against Defects
Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in materials and workmanship for 12 months,
from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions
where provided. The benefit of this warranty is in addition to your rights under the Australian Consumer Law and to other rights and
remedies of the consumer under a law in relation to the goods or services to which the warranty relates.
Through a network of retailers and resellers, Laser will provide you with your choice of a repair, exchange (where possible) or refund
(within Dead on Arrival period) for this product if it becomes defective within the warranty period.
This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse, normal wear and tear, neglect or
improper storage.
Please retain your receipt as proof of purchase.
How to make a product warranty claim: Step 1: Find your receipt which proves the date of purchase. Where the date of purchase
cannot be verified, your place of purchase or Laser will make an assessment based on the date of manufacture, the condition of the
Laser product and the type of defect.
Step 2a): Contact your place of purchase. They will assess the nature of the fault and repair, replace or refund the product as per their
store refund or warranty policy.
Step 2b): If your place of purchase cannot be contacted, then you can contact Laser Customer Service with details of your defective
Laser Product Phone [phone]; or Email: serv[email protected] or online www.laserco.com.au/warranty (click on “Consumers
(End Users)”). Our business address is: Unit 1/6-8 Byfield Street, North Ryde, NSW 2113
Step 3: Laser will issue you with a Return Authorisation (RA) number within 48 hours. When requested, send us the defective product
and a copy of your receipt. Laser will cover the cost of the return delivery.
Step 4: Wait for us to contact you. Once we have received your defective Laser product for inspection, we will inform you of our
assessment of your claim within 7 days. When we contact you, we will firstly let you know whether you have a valid claim under this
Warranty, and if so, we will inform you whether your defective Laser product will be replaced or repaired, together with the number of
days you can expect to wait to receive your replaced or repaired Laser product.
Step 5: For further details on warranty cover and returns, please check Terms and Conditions for Warranty Returns section at
www.laserco.com.au/warranty (Consumers Section).
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or
refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.