Laser PJT-BYCBL-040 User manual

Laser Backyard Cinema Bundle
PJT-BYCBL-040
User Manual

WHAT’S IN THE BOX
• Inatable screen with built-in blower
• Detachable white movie screen
• Carry Bag
• 6 x tie down ropes
• 6 x tether stakes
• Projector
• Remote
• AC Power Adapter
• Lens cover
• Mini Bluetooth Soundbar
• USB-A to USB-C cable (for power)
SELF-INFLATABLE SCREEN
PROJECTOR
SOUNDBAR

WHAT’S IN THE BOX
LASER BACKYARD
CINEMA BUNDLE
Additional items you may need for
setting up:
1. 2x AAA batteries for the projector
remote control
2. Power extension cord with double
adaptor
3. HDMI cable
4. 3RCA to 3.5mm AV cable (optional to
connect with devices without an HDMI
output)

LASER BACKYARD
CINEMA BUNDLE
For best use, please note the following:
When setting up the screen and projector
outdoors, please be aware of wind
conditions and obstructions. The projector
works best in dark conditions, so other light
sources from street lighting, backyard lights,
and mobile devices may impact the clarity
of the projected image. For an optimal
viewing experience, we recommend a
120-inch image or less, with the projector
placed 3.6 metres from the screen.
A 144-inch screen is possible, however the
projector would need to be 4.4 metres from
the screen, meaning brightness and image
quality may be compromised.
continued...

LASER BACKYARD
CINEMA BUNDLE continued...
LASER BACKYARD
CINEMA BUNDLE
SETTING UP
1. Select an area large enough to erect the
projector screen.
2. Unpack the projector frame and lay it
out on the ground with the front of the
screen facing upwards, and without
blocking the air pump.
continued...

LASER BACKYARD
CINEMA BUNDLE
3. Attach the white movie screen to the
frame.
4. Connect the air pump to power and
inate the screen.
5. Secure the inated screen to the ground
using supplied stakes and ropes.
6. Unpack the projector and connect it
to power. Use the rst illustration on the
previous page as a guide to position the
projector.
7. Reposition the projector to get the best
image on the screen. You can use Focus
and Keystone rotators on the projector to
help you.
continued...

LASER BACKYARD
CINEMA BUNDLE continued...
LASER BACKYARD
CINEMA BUNDLE
9. Connect the mini soundbar to power
using the supplied USB-A to USB-C
power cable. We recommend that you
use a 5V, 1A USB adaptor, however you
can use the USB port on the projector
as well.
10. Turn on the speaker. Bluetooth mode
is the default mode on the speaker. If not,
press and hold the Mode button to switch
to Bluetooth mode.
11. Turn on Bluetooth on the projector by
going to Menu > Option > Bluetooth. Wait
for a list of nearby BT devices to appear.
Select, PJT-BYCBL-040-C and click OK
to connect. Audio played on the
projector can now be heard through the
mini soundbar.
continued...

SELF-INFLATABLE SCREEN
PRODUCT CARE
• Before using and reusing, inspect the
product carefully.
• Do not mount or place near gas or
electric heaters, replaces, candles, or
other similar sources of heat.
• Unplug the product when not in use.
Store neatly in a cool, dry location
protected from sunlight.
• Do not place it where small children
can reach it.
• Do not hang ornaments or other
objects from hooks and ropes.

SELF-INFLATABLE SCREEN
continued...
• Protect the electric fan and power
cord from direct exposure to water.
This precaution will reduce the risk of
electrical shock.
• When the temperature is below 10°F
(-14°C), the motor may temporarily stop
running. The motor will begin functioning
again in higher temperatures.
• Do not attempt to inate the item
during unusually strong winds. If it
becomes too windy for safe operation,
simply allow the item to deate and wait
for better conditions before re-inating.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given

SELF-INFLATABLE SCREEN
continued...
supervision or instruction concerning use
of the appliance by a person responsible
for their safety. Children should be
supervised to ensure that they do not
play with the appliance.
• If the power cord is damaged, it must
be replaced by the manufacturer, its
service agent, or similarly qualied
persons in order to avoid a hazard.

SELF-INFLATABLE SCREEN
continued...
HOW TO INFLATE
Step 1: Remove contents from packaging and
lay out the screen in a clear, at area. Ensure
that the inatable frame is lying so that the
white movie screen is facing up.
Step 2: Find the air blower and place it away
from anything that may obstruct its fan.

SELF-INFLATABLE SCREEN
continued...
Step 3: Plug the power cord into a power
outlet to inate the screen. This process may
take a few minutes. Make sure the air intake is
clear of fabric or other obstructions, and the
zipper is fully closed.
Step 4: Stand the item upright, ensuring that
fans are away from obstructions.
Step 5: For outdoor use, Tie the ropes
through each anchor point (6 points) and lock
with stakes.

SELF-INFLATABLE SCREEN
continued...
HOW TO DEFLATE
Step 1: Switch o power to the air blower and
open zipper to release air.
Step 2: Flatten the screen with white movie
screen cloth facing up to avoid dirtying the
screen.
Step 3: Fold in half 3 times vertically.
Step 4: Place in carry bag.

PROJECTOR
SAFETY PRECAUTIONS
• Read this manual thoroughly before you
start using the Projector.
• This device should only be opened or
repaired by qualied personnel.
• The safety precautions reduce the risk of
re, electric shock, or injury when correctly
complied to.
• This device is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given instructions concerning
the use of the product by a person
responsible for their safety.

• Do not place the projector in the following
conditions:
• On an unstable cart, stand, or table.
• On high furniture without securing both
the furniture and the device to a stable
support.
• In direct sunlight, near heaters or heat
radiating appliances.
• In a dusty, smoky or steamy environment.
• On a sheet of paper, cloth, rug or carpets.
• Do not expose this device to rain or
moisture.
• Ensure that there is sucient ventilation to
prevent the buildup of heat inside this device.
Allow at least 10cm of space between this
device and a wall.
PROJECTOR
continued...

PROJECTOR
• DO NOT look into the lens while the
projector is on. Serious damage to your eye
could result.
• Handle the power adaptor carefully.
• Do not use any power adaptor other than
the one supplied.
• Do not place the power cable under the
projector or any heavy object.
• Do not heat the power cable.
• Do not handle the power adaptor with wet
hands.
• Never unplug the device by pulling on the
power cord. Always grip the plug rmly and
pull straight out from the outlet.
• Turn o and unplug the power adaptor
if the device is not being used for an
an extended period.
continued...

PROJECTOR
INSTALLING YOUR PROJECTOR
DISTANCE FROM THE PROJECTOR
AND SCREEN
continued...
obmi^ `b
obj ls b
i bkp=` ls bo
i bkp=` ls bo
obmi^ `b
obj ls b
i bkp=` ls bo
i bkp=` ls bo
• Remove the lens cover
before using
• Close the lens cover
when not using

VERTICAL ADJUSTMENT
Please follow the below diagram for vertical
adjustment.
PROJECTOR
To reduce image distortion, it is recommended
to move the projector as close to centre of
screen.
If you cannot install the
projector squarely facing
the screen, correct any
resulting keystone
distortion using the
keystone adjustment
control.
continued...

PROJECTOR
The keystone image is created when the
projector image is projected to the screen at
an angle. The keystone correction will restore
the distorted image to a rectangular or square
shape.
ADJUST FOCUS AND KEYSTONE
Adjust the focus by turning the knob while
observing the image near the center of the
screen. Optimal focus is obtained when the
image is visible and sharp. Depending
on the projected screen size, the focus near
the screen edges may be less sharp than the
screen center.
continued...

PROJECTOR
REMOTE CONTROL
continued...
OK
M
FLIP
POWER ON
MENU
OK
MUTE
VOLUME- VOLUME+
FLIP
PLAY/PAUSE
RETURN
HOME MENU
NAVIGATOR
BUTTONS
Power: Press to power ON.
Press twice to power OFF.
Mute: Press to mute volume.
VOL+/VOL-: Press to adjust
audio level.
Arrows/OK: Press to navigate
and conrm selections in
Settings and other menus.
Return/Exit: Press to exit the
projector menu.
Flip: Press to ip display image
180 degrees. Home Press to enter
the home menu.
Menu: Press to access projector
Settings.
Play/Pause: Press to play or pause
an individual chapter or track.