Laserpecker 4 User manual

User Manual

Rotary Extension

LaserPecker 4

此页不印刷内容

List of Included Parts

Single-step

Jaw * 3

Double-step

Jaw * 3

Stud

Component * 3

Riser Add-on*1

M3x6 Screw *6 M3x10 Screw *4

Elevation Pad * 1After-Sales Services

Online User Community

Technical support for this product is available globally.

Please contact us if you encounter any problem with

your LaserPecker 4 and we will get back to you as soon

as possible.

LaserPecker’s huge online global community

connects our diverse group of dedicated users and

offers support, inspiration, and a showcase for

sharing creativity.

Email：[email protected]

Facebook：LaserPecker 4

LaserPecker 4

VIP Group

Rotary Headstock Head Support Module

Rotary Headstock Baseplate

Hex Key

1m USB-A Cable *1

Component Overview & Descriptions

LED Indicator

USB-A Power Output/Input

Angle Adjustment Knob

Tailstock Stand Knob

Lock key

Ball Holder

USB Output Port for Safety Shield

USB Output Port for Rotary Extension

DC Power Cable Input

Component Overview & Descriptions

Rotary Extension USB-A

Power Input/Output

Electric Stand USB-C Power Input

*If the cable of the electric stand is connected to the accessory output port, the lifting button in the APP will not be able to control the electric stand, and the user needs to manually adjust the lifting button of the host to adjust the height.02

Quick Installation

1Assemble the Riser Add-onTighten the two screws to assemble Riser Add-on between LaserPecker 4 Laser Unit and Electric Stand.

*Make sure the Safety Shield is assembled before this step.For details, please refer to LaserPecker 4 User Manual.

2Assemble the Rotary HeadstockAttach Rotary Headstock Head to Headstock Baseplate with 4 pcs of M3x10 screws and the Hex Key.04

Headstock Assembly

①Double-step Jaws Installation

Tightening

screws

Attach three double-step jaws to the rotary chuck using the wrench and 6 pcs of M3x6 screws.

②Single-step Jaws Installation

Tightening screwsAttach three single-step jaws to the rotary chuck using the wrench and 6 pcs of M3x6 screws. 06

③Stud Component Installation

Tightening screwsAttach three stud components to the rotary chuck.

4Rotary Extension Assembly

Slide the tailstock into the base

of the headstock along the track 08Lock the

tailstock stand knob

Put the Elevation Pad under the Rotary Headstock to make it more table.

5Stabilize the Rotary Extension

Quick Start Guide

Turn on Mode Settings>Rotary Extension on the app, adjust the height and angle of the rotary.

Choose an image, set its size and position, start previewing, set the engraving power and depth

parameters, and start engraving.

Turn on the Rotary Extension button.

Turn the knob on the tailstock stand clockwise

or counterclockwise to adjust height.

Turn the knob10

When the diameter of the carved object is too large, press the lock key.Turn the chuck to adjust the gripper to the appropriate size.After the engraving material is ﬁxed, the lock key needs to be released, Otherwise, the Rotary Extension will not turn properly when previewing the engraving.Press the lock keyRelease the lock keyTurn the chuck11

Product Specification

WeightAppearanceEngraving diameter range (Double-step Jaw)Engraving diameter range(Single -step Jaw)Engraving diameter range (Stud Component） Operating system Power inputPrecise control308*108*99mm1.7kg52mm-80mm200mmAnodic oxidation of aluminum alloy0mm-128mm66mm-145mm13mm- 78mmSupport iOS 9.0+，Android 6.0+，MacOS 10+，Windows 10+5V/1A0.014°140.625 degrees/secondV= 360/200/128/0.00012=117.1875 degrees per secondV= 360/200/128/0.00012=117.1875 degrees per secondIdling movement speedSlowest engraving speedSizeChuck diameter rangeEngraving maximum diameterFastest engraving speed12