Lasertec CL3 HYBRID User manual

CL3 HYBRID
MULTI-LINE LASER
INSTRUCTION MANUAL

2
SAFETY
Read the following safety instructions before
attempting to operate this product.
Keep these instructions in a safe place or store
in the carry case for future reference.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
WARNING: Read and understand all
instructions.
▪Use the laser only with the specically
designated batteries.
▪Store the laser out of reach of children and
other untrained persons. Lasers are dangerous
in the hands of untrained users.
▪Use only accessories that are recommended
for your model.
▪Tool service must be performed only by
qualied repair personnel. Repairs, service
or maintenance performed by unqualied
personnel will void the warranty. Only
approved and authorised service technicians
can carry out warranty repairs.
▪Do not use optical tools such as a telescope
or transit to view the laser beam. Serious eye
injury could result.
▪Do not place the laser in a position which
may cause anyone to intentionally or
unintentionally stare into the laser beam.
Serious eye injury could result.
▪ Do not position the laser near a reective
surface which may reect the laser beam
toward anyone’s eyes. Serious eye injury
could result.
▪Do not use optical tools to view the laser
beam.
!

3
▪Do not set up the tool at a position where
the laser beam can cross any person at head
height.
▪Do not let children come in contact with the
laser.
▪ Turn the laser o when it is not in use. Leaving
the laser on increases the risk of staring into
the laser beam.
▪Do not operate the laser around children or
allow children to operate the laser. Serious eye
injury may result.
▪Do not remove or deface warning labels.
▪Position the laser securely on a level surface.
Damage to the laser or serious injury could
result if the laser falls.
WARNING: DO NOT DISASSEMBLE
THE LASER. There are no user serviceable
parts inside. Disassembling the laser will
void all warranties on the product. Do not
modify the product in any way. Modifying
the tool may result in hazardous laser
radiation exposure.
CAUTION: Class 3 Laser Product
▪Never look into the laser beam directly and
intentionally.
▪Do not use optical tools to view the laser
beam.
▪Do not set up the tool at a position where
the laser beam can cross any person at
head height.
▪Do not let children come in contact with
the laser.
!
!

4
Carry case
4x AA alkaline batteries
Lasertec CL3 Hybrid
ITEM CHECKLIST
Please ensure the following items are included with your laser level.
If anything is missing please contact your retailer.
2x laser targets
INCHES CM
1
1
2
3
4
5
6
7
2
3
INCHES CM
1
1
2
3
4
5
6
7
2
3
The carry case contains a cut
out for an optional multi-purpose
mount which can be purchased
from your retailer.
i

5
LASER OVERVIEW
Vertical laser port
Horizontal laser port
1/4” tripod thread
Control panel
Power / locking switch
Battery door cover

6
LASER OVERVIEW: CONTROL PANEL
Line mode
Battery indicator
Pulse mode
Pulse mode indicator

7
DETECTOR OVERVIEW
Line mode
The detector is an optional accessory which
can be purchased from your retailer.
It is recommended that a hybrid line detector is
used with this instrument for compatiblity with
both the red and green laser beams.
ii
Speaker
Sound on / off
LED speaker indicator
Laser sensor
Power
Bubble vial
LED power indicator
LED direction indicator
LED direction indicator
LED centre indicator
Bubble vial

8
SET UP
POWER SUPPLY
BATTERY REPLACEMENT
▪Select a place as close as practical to
the work site. Ensure the location is clear
of traffic.
▪Place the instrument on a level surface
such as a bench or mount.
▪The instrument is powered by four AA
alkaline batteries.
▪Remove the battery cover door and the
batteries.
▪Insert the batteries according to polarity
and replace the battery door.
USING YOUR LASER

9
OPERATION
▪ To turn the instrument on, slide the power
/ locking switch to the “on” position. Self
levelling will commence and the horizontal
beam will activate.
▪If the instrument is outside the self
levelling range the instrument will not level
causing the laser beam to switch off and
emit a beeping sound repeatedly. If this
occurs, reposition the instrument onto a
level surface until the instrument can level
off.
▪Press the line mode button on the control
panel to cycle through the active beams.
▪ To lock the beams in place, slide the power
/ locking switch to the ‘lock’ position. The
instrument can now be tilted to the desired
angle.
When in the locked position the
instrument will not self level and correct
for vibrations and/or disturbances.
i

10
▪Press the pulse mode button on the top of
the instrument to enter into pulse mode.
▪Switch the detector on by pressing the power
button. The speaker will beep indicating the
instrument is operating.
▪Move the detector into the path of the laser
beam.
▪Press the detection mode button to alternate
between fine and course detection.
▪Hold the detector upright for horizontal
beams. Rotate the detector 90° for vertical
beams.
▪The LED direction indicators will indicate the
position of the laser beam. The centre LED will
indicate alignment with the beam.
USING A DETECTOR
The detector is an optional accessory
which can be purchased from your retailer.
i
Detector position for horizontal beams
Detector position for vertical beams

11
Error Cause & Solution
Laser does not turn on
▪Check the batteries. They may be in the wrong way or need
replacing.
▪Check the battery compartment for signs of damage.
Ensure they are clean and not bent.
Laser does not remain on
for long periods of use.
▪Check the batteries.
▪Check the battery compartment for signs of damage.
Ensure they are clean and not bent.
Laser does not level off
▪Instrument may be outside its self levelling range.
Adjust the instrument or tripod so it is level.
▪Instrument may have low power.
▪Instrument may have impact damage.
TROUBLE SHOOTING

12
CARE AND MAINTENANCE
▪This is a precision measuring instrument
and should always be handled with care and
transported within the carry case provided.
▪Always slide the locking switch to the “off”
position when transporting the instrument
or moving around the job site.
▪ Whenever possible, store the instrument
in a dry, shady location.
▪Calibration of the instrument is
recommended: every six months, if ongoing
accurate levelling is required, or an impact
has occurred.
▪The operator should check the accuracy
of the instrument before precision levelling
is attempted. Failure to do so may result in
inaccurate measurements.
▪ Clean the instrument with a dry, soft cloth
after use in dusty, damp or wet conditions
before storing.
▪Smudges and fingerprints may be
removed with a damp tissue or a soft, lint-
free cloth.

13
WARRANTY
AUSTRALIA
“Our goods come with guarantees that
cannot be excluded under the Australian
Consumer Law. You are entitled to a
replacement or refund for a major failure
and for compensation for any other
reasonably foreseeable loss or damage.
You are also entitled to have the goods
repaired or replaced if the goods fail to be
of acceptable quality and the failure does
not amount to a major failure.”
For more information please visit
consumerlaw.gov.au
The Lasertec CL3 Hybrid comes with a 3 (three) year manufacturers warranty.
NEW ZEALAND
For more information please visit
consumerprotection.govt.nz

14
To assist you with any queries or technical
questions please contact customer support
Australia: 1300 658 338
New Zealand: 0800 367 527
CUSTOMER SUPPORT

15
SPECIFICATIONS
Specications Lasertec CL3 Hybrid
Product code 91220
Warranty 3 Years
Accuracy ±2mm at 10m
Operating range 50m (with optional detector)
Levelling range ±4°
Laser class 2 Red / 3 Green
Battery life 10 hours
Battery type 4x 1.5v AA
Vertical lines 2
Horizontal lines 1
IP rating 54
Weight (kg) 0.59
Dimensions (mm) 110 x 65 x 115

www.spoton.com.au