Lasko 5155 User manual

OSCILLATING CERAMIC HEATER
with REMOTE CONTROL
MODEL 5155
Rev. G 5/04 85155ES Rev. G 5/04 15155ES
MODELO 5155
El manual imprimió en la China
NOTAS
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
IMPORTANT INSTRUCTIONS -
OPERATING MANUAL
1. Read all instructions before using Heater.
2. UsethisHeateronlyasdescribed in this manual. Any
otherusenotrecommendedbythemanufacturer may
cause fire, electrical shock, or injury to persons.
3. Make certain that the power source conforms to the
electrical requirements of the Heater.
4. Extreme caution is necessary when any Heater
is used by or near children or invalids and when-
ever the Heater is left operating unattended.
5. This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully in the out-
let, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this
safety feature.
6. Wherepossible,avoid the use ofextensioncordsbe-
cause the extension cord may overheat and cause a
risk of fire. If they must be used, minimize the risk of
overheating by ensuring that they are UL listed, a
minimumNo.14AWG, ratednotlessthan1875watts.
Never use a single extension cord to operate more
than one Heater.
7. Do not operate any Heater with a damaged cord or
plugoraftertheHeater malfunctions,has beendropped
or damaged in any manner. Return Heater to autho-
rized service facility for examination, electrical or me-
chanical adjustment or repair.
8. Unplug power cord before servicing or moving the
Heater. Always unplug Heater when not in use.
WARNING: DO NOT DEPEND ON THE ON/OFF
SWITCH AS THE SOLE MEANS OF DISCONNECT-
ING POWER WHEN SERVICING OR MOVING THE
HEATER. ALWAYS UNPLUGTHE POWER CORD.
9. Do not insert or allow fingers or foreign objects to
enter any ventilation or exhaust opening as it may
causeanelectric shock or fire,ordamagethe Heater.
Do not block or tamper with the Heater in any man-
ner while it is in operation.
10.To prevent a possible fire, do not block air intakes or
exhaust in any manner. Do not place on soft sur-
faces, like a bed, where openings may become
blocked.
11.Always place the Heater on a stable, flat, level surface
when operating, to avoid the chance of the Heater over-
turning. Locate the Power Cord so the Heater or other
objectsare not restingonit. Do not run Power Cordunder
carpeting. Do not cover Power Cord with throw rugs, run-
ners, or the like. Arrange Power Cord away from room
traffic and where it will not be tripped over.
12.This Heater is hot when in use. To avoid burns, do
not let bare skin touch hot surfaces. Always use
handle when moving this Heater. Keep combustible
materials,such as furniture, pillows,bedding,papers,
clothes and curtains at least 3 feet (0.9 m) from the
front of the Heater and keep them at least 1 foot (0.3
m) from the sides and rear.
13.A Heater has hot and arcing or sparking parts inside.
It must NOT be used in potentially dangerous loca-
tions such as flammable, explosive, chemical-laden
or wet atmospheres. This Heater is intended for gen-
eral use ONLY.
14.This Heater is not intended for use in wet or damp
locations. Never locate a Heater where it may fall
into a bathtub or other water container.
15.Do not use Heater outdoors.
WARNING: REDUCE THE RISK OF FIRE OR ELEC-
TRIC SHOCK – DO NOT USETHIS HEATERWITH ANY
SOLID STATE SPEED CONTROL DEVICES.
GENERAL SAFETY INFORMATION
When using electrical appliances,
basic precautions should always be followed
to reduce the risk of fire, electric shock and injury to person,
including the following:
SAVE THESE INSTRUCTIONS

Remote Control (Figure 2)
1. Press the ON-HIGH or ON-LOW button will start the heater on
either HIGH or LOW heat.
2. The OFF, TIMER and SWING buttons function in the exact same
manner as listed in steps 5 through 7 of the operating instructions.
3. The remote control is powered by two AAA batteries supplied.
There is a cover on the back of the remote control that can be
removed for replacement of the batteries as required.
4.Do not mix fresh and old batteries, or batteries of
different specifications.
Rev. G 5/04 25155ES Rev. G 5/04 75155ES
OPERATION
Control Panel (Figure 1)
1. Carefully remove the Heater from the plastic bag and the carton.
2. Place the Heater on a firm and level surface.
3. Plug the cord set into a 120V electrical outlet. Be sure plug fits
tightly in outlet. A loose fit will cause overheating and damage the
plug. Plug and cord set may feel warm during normal usage.
4. When the Heater is plugged in, there will be a “beep” to indicate
that there is power to the unit.
5. ON/FUNCTION button.When this button is pushed, HIGH indicator
light comes on and Heater is in the high heat mode. (1500 watts)
6. Press the ON/FUNCTION button again the HIGH indicator light
goes off and the LOW indicator light comes on and the Heater
is now in the low heat mode. (900 watts)
7. Press the ON/FUNCTION button again and the LOW indicator
lightgoes off and the FAN indicatorlight comes on and theHeater
is in fan only mode.
8. OFF button – Press this button will shut the Heater off.
9. “TIMER” button. Press it once and the light comes on indicat-
ing 1/2 hour of time. Press it again and the light indicates 1
hour. Press it a third time and it indicates 1.5 hours. The total
time that can be indicated at one time is 7.5 hours.Continuing
to press the timer button will cycle through the settings until all
timer lights are off. When the time indicator lights are off, the
Heater will run continuously.
10.The “SWING” button.Press this button and the swing light comes
on and the Heater will oscillate back and forth.Press it again and
the light will go out and the oscillation will stop.
11.The Heater must be placed flat on the floor or the tip-over switch
will shut it off automatically.
12.To disconnect Heater, press “OFF” button, then remove plug
from outlet.
PARA PIEZAS DE REPUESTO:
Para piezas de repuesto, favor de llamar al 1-800-233-0268, DE LUNES AVIERNES, DE 8:00 A.M. a 4:00 P.M., HORA
ESTÁNDAR DEL ESTE.“POR FAVOR, NO ENVÍE EL APARATO AL LUGAR DONDE LO COMPRÓ.”
Mencione el tipo y el estilo del producto (ubicados en la parte inferior del aparato) al llamar.
PARA APOYOTÉCNICOY UBICACIONES DE CENTROS DE SERVICIO:
Para cualquier pregunta o comentario, o para solicitar información sobre el centro de servicio más cercano a su domicilio,
FAVOR DE LLAMAR A NUESTRA “LÍNEA GRATUITA”AL 1-800-233-0268, DE LUNES AVIERNES,
DE 8:00 A.M. A 5:00 P.M., HORA ESTÁNDAR DEL ESTE.”
Mencione el nombre y el número de modelo del producto al llamar.
Appliance Service Dept. 300 Confederate Drive Franklin, TN 37064.
¡POR FAVOR, NO ENVÍE EL PRODUCTO A ESTA DIRECCIÓN!
Para más información,visite nuestro sitio en la Web: www.laskoproducts.com
GARANTÍA LIMITADA
EN CASO DE NECESITAR PIEZAS, COMUNÍQUESE CON EL FABRICANTE PARA PIEZAS DE REPUESTO AMPARADAS
POR LA GARANTÍA. SE DEBE INCLUIR UNA COPIA DEL RECIBO DE COMPRA CON EL TIPO Y ESTILO DEL
CALEFACTOR, UBICADOS EN LA PARTE INFERIOR DEL APARATO.
Este producto está garantizado por tres años a partir de la fecha de compra contra defectos de fabricación y/o de
materiales. A nuestra discreción, las piezas que resulten defectuosas se reemplazarán o se repararán, o bien se
reemplazará el producto entero.
Si se necesita reparación eléctrica o mecánica durante el período de garantía, envíe el producto completo, con porte
pagado, al centro de servicio más cercano. Llame al número que se indica más adelante para encontrar el centro de
servicio más cercano.
Si necesita una pieza de repuesto, debe especificar el tipo y el estilo del aparato. Esta información puede encontrarse en la
parte inferior del aparato. En cualquiera de los casos, es necesario que envíe una copia del recibo de compra.
Esta garantía no tiene validez si el daño se debe a un accidente, manejo o uso indebido, daños de transporte, abuso, mal
uso, reparaciones o intentos de reparación no autorizados, o al uso comercial del producto.
TODAS LAS GARANTÍAS, MANIFIESTAS O IMPLÍCITAS, RIGEN DURANTETRES AÑOS A PARTIR DE LA FECHA DE
COMPRA ORIGINAL. ESTA GARANTÍA NO CUBRE EN NINGÚN CASO RESPONSABILIDAD POR DAÑOS DIRECTOS
O INDIRECTOS POR CAUSA ALGUNA.
En algunos estados no se permiten limitaciones de la duración de una garantía implícita, ni la exclusión o limitación de
daños directos o indirectos, por lo cual las limitaciones y exclusiones anteriores pueden quedar sin vigencia en su caso.
Esta garantía le otorga derechos legales específicos.Usted podría tener otros derechos que varían de un estado a otro.
MODELO 5155
MODEL 5155
+
+
Figure 2
SAFETY FEATURE
1. A thermal overload protector is built in to prevent overheating.
2. When an overheat temperature is reached, the Heater will auto-
matically shut-off. It can only resume operation when the unit is
reset. (See reset instructions below).
To Reset Heater:
1. Unplug the Heater and wait 10 minutes for the unit to cool down.
2. After the 10 minutes, plug the Heater in again and follow the
OPERATIONINSTRUCTIONdescribedinthisinstructionmanual.
TROUBLE SHOOTING TIPS
If your heater shuts off unexpectedly or fails to operate, one of
the above-mentioned safety features may have been activated
to prevent overheating.
1. Be sure the power cord is plugged into a working electrical outlet.
If you have a problem that can not be resolve by the steps listed
above, contact Technical Assistance at 800-233-0268, Monday
through Friday, between the hours of 8am and 5pm EST.
OFF
TIMER
FUNCTION SWING
ON
0.5
124
Fan
LH
CONTROLS
Figure 1
MAINTENANCE
WARNING: ALWAYS UNPLUGTHE CORD BEFORE MOVING OR
SERVICING.
WARNING: DO NOT IMMERSE HEATER IN WATER.
CLEANING: IMPORTANT! Clean the Heater grill with the
vacuum brush attachment of your vacuum cleaner. Clean the body
of the Heater with a soft cloth.
DO NOT ATTEMPTTOTAKE APARTTHE HEATER.
CAUTION:Do not use gasoline, benzine, thinner, harsh clean-
ers, etc., as they will damage the Heater. NEVER use ALCO-
HOL OR SOLVENTS.
SERVICING: All other servicing, with the exception of general
user-maintenance, should be performed by an authorized ser-
vice representative. Call 1-800-233-0268, Monday through Fri-
day, between the hours of 8am and 5pm EST for the location of
your nearest service center.
STORAGE: Store the Heater with these instructions in the original
carton in a cool, dry place.

Rev. G 5/04 65155ES Rev. G 5/04 35155ES
FUNCIONAMIENTO
Tablero de control (Figura 1)
1. Retire cuidadosamente el calefactor de la bolsa plástica y caja.
2. Coloque el Calefactor sobe una superficie firme y plana.
3. Enchufeelcable eléctrico a un tomacorriente de 120V.Asegúrese
que el enchufe quede bien ajustado. Un ajuste suelto puede
causar sobrecalentamiento y dañar el enchufe.
4. Alenchufarel Calefactor se oyeuntono para indicarque la unidad
recibe alimentación eléctrica.
5. Botón ON/FUNCTION. Al oprimirse este botón, la luz indicadora
HIGH se ilumina indicando que el Calefactor se encuentra en el
modo de calor alto.(1500 vatios)
6. Si se oprime de nuevo el botón ON/FUNCTION, la luz indicadora
HIGH se apaga y la luz indicadora LOW se ilumina indicando que
el Calefactor se encuentra en el modo de calor bajo. (900 vatios)
7. Si se oprime de nuevo el botón ON/FUNCTION, la luz indicadora
LOW se apaga y la luz indicadora FAN se ilumina indicando
que el Calefactor se encuentra en el modo de ventilador
solamente.
8. Botón OFF – Al oprimir este botón el Calefactor se apaga.
9. Botón“TIMER”. Oprímalo una vez y se enciende la luz que indica
1/2 hora de funcionamiento.Oprímalo de nuevo y la luz indica 1
hora. Oprímalo por tercera vez y se indica 1.5 horas. El tiempo
total máximo que puede indicarse es de 7.5 horas. Si se sigue
oprimiendo el botón TIMER se avanza por los ajustes hasta que
se apaguen todas las luces del temporizador. Cuando están
apagadas las luces indicadoras del temporizador, el Calefactor
funciona continuamente.
10. Botón“SWING”. Si se oprime este botón la luz SWING se ilumina y el
Calefactor oscila a través de una carrera de 120 grados.Oprímalo de
nuevo para apagar la luz y detener la oscilación.
11. El calefactor debe colocarse plano en el piso; de lo contrario el
interruptor protector encasode vuelco loapaga automáticamente.
12.Para desconectar el Calefactor, oprima el botón “OFF” y retire el
enchufe del tomacorriente.
Control remoto: (Figura 2)
1. Oprima el botón ON-HIGH o el ON-LOW para encender el
calefactor y escoger ya sea calor ALTO o BAJO.
2. Los botones OFF, TIMER y SWING funcionan de la misma
manera explicada en los pasos 5 al 7 de las instrucciones de
uso dadas anteriormente.
3. El control remoto recibe alimentación de las dos baterías AAA
provistas.Hayuna cubiertaen la parte posterior del control remoto
que puede retirarse para sustituir las baterías según se requiera.
4. No mezcle baterías, ni las baterías frescas y viejas de
especificaciones diferentes.
LIMITEDWARRANTY
SHOULD ACCESSORY PARTS BE NEEDED, CONTACTTHE MANUFACTURER FOR IN-WARRANTY REPLACEMENT
PARTS. A COPY OF PROOF-OF-PURCHASE MUST BE INCLUDED ALONGWITHTHE TYPE AND STYLE, WHICH IS
LOCATED ONTHE BOTTOM OFYOUR APPLIANCE.
This product is warranted for three years from the date of purchase against defects in workmanship and/or materials. At our
option, parts that prove to be defective will either be repaired or replaced or the whole product will be replaced.
Should electrical or mechanical repair become necessary during the warranty period, send your complete product, postage or
freight pre-paid to the nearest service center. Call the number below for the service station nearest you.
Should a part need replacement, you must give us the type and style of your appliance. You will find this at the bottom of the
appliance. In either case, a copy of your proof-of-purchase is requested.
This warranty does not apply if the damage occurs because of accident, improper handling or operation, shipping damage,
abuse, misuse, unauthorized repairs made or attempted, of the use of the product for commercial service.
ALLWARRANTIES, EXPRESSED OR IMPLIED, LAST FORTHREEYEARS FROM THE DATE OF ORIGINAL PURCHASE.
THISWARRANTY DOES NOT COVER LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY CAUSE
WHATSOEVER.
Some states do not allow limitations on how long any implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so that the above limitations and exclusions may not apply to you. This warranty gives you specific
legal rights.You may also have rights which vary from state to state.
FOR PARTS:
For Replacement parts please call: 1-800-233-0268, MONDAYTHROUGH FRIDAY, BETWEENTHE HOURS OF 8 AM
and 4 PM EST.“PLEASE DO NOT RETURN PRODUCTTO PLACE OF PURCHASE”
Reference the type and style of product (located on the underside of the product) when you call.
FORTECHNICAL ASSISTANCE AND SERVICE CENTER LOCATIONS:
For any questions, comments or the location of your nearest service center, PLEASE CALL OURTOLL-FREE“HOTLINE”
AT 1-800-233-0268, MONDAYTHROUGH FRIDAY, BETWEENTHE HOURS OF 8 AM and 5 PM EST.
Please reference product name and model no. when you call.
Appliance Service Dept. 300 Confederate Drive Franklin,TN 37064.
PLEASE DO NOT SEND PRODUCT TOTHIS LOCATION!
For more information please visit our website: www.laskoproducts.com
MODELO 5155 MODEL 5155
CONTROLES
Figura 1
OFF
TIMER FUNCTION
SWING
ON
0.5
124
Fan
LH
+
+
Figura 2
CARACTERÍSTICAS DE SEGURIDAD
1. El Calefactor tiene incorporado un protector contra sobrecarga
térmica para evitar que se sobrecaliente.
2. Cuando se alcance una temperatura de sobrecalentamiento, el
calefactor se apaga automáticamente. Sólo puede volverse a
encender después que el usuario reposicione la unidad.
Para reposicionar el Calefactor:
1. Desenchufe el Calefactor y espere de 10 minutos para que el
Calefactor se enfríe.
2. Después que los 10 minutos, tapan la Calefactor en otra vez y
sigue la INSTRUCCION de la OPERACION descrita en este
manual de la instrucción.
MOLESTE PUNTAS QUE DISPARAN
Si su Calefactor apaga inesperadamente o falla de operar, uno
de las características ya mencionadas de seguridad se puede
haber activado para prevenir recalentar.
1. Estéseguro quela cuerdadel poder se tapa en un trabajar salida
eléctrica.
Si usted tiene un problema que no puede ser la resolución por los
pasos listó arriba, contacta Ayuda Técnica 800-233-0268, en el
lunes por el viernes, entre las horas de 8am y 5 p.m. EST.
MANTENIMIENTO
ADVERTENCIA: SIEMPRE DESENCHUFE EL CORDÓN ANTES
DE MOVER O DAR SERVICIO A LA UNIDAD.
ADVERTENCIA: NO SUMERJA EL CALENTADOR EN AGUA
LIMPIEZA: Limpie la rejilla superior del calefactor con el accesorio
de cepillo de su aspiradora.Limpie el exterior del calefactor con un
paño suave.
NO INTENTE DESARMAR EL CALENTADOR.
ADVERTENCIA: NO RETIRE EL PROTECTOR DE REJILLA NI
PERMITA QUE EL CALENTADOR SE USE SIN EL PROTECTOR
DE REJILLA EN SU LUGAR. NUNCA USE ALCOHOL NI
SOLVENTES.
SERVICIO: Cualquier otro servicio, con la excepción de
mantenimiento general por parte del usuario, deberá ser realizado
por un representante de servicio autorizado. Llamar al 1-800 -233-
0268, de lunes a viernes, entre las 8 a.m. y las 5 p.m. (Horario
Estándardel Estede los Estados Unidos), paraaveriguarla dirección
de su centro de servicio más cercano.
ALMACENAMIENTO: Guarde el calefactor, junto con estas
instrucciones, en su caja original y en un lugar fresco y seco.

Rev. G 5/04 45155ES Rev. G 5/04 55155ES
CALEFACTOR DE CERÁMICA
OSCILANTE con CONTROL REMOTO
MODELO 5155
NOTES
MODEL 5155
Manual printed in China
INSTRUCCIONES IMPORTANTES -
MANUAL DE USO
LEA Y GUARDE ESTAS INSTRUCCIONES
LEA CUIDADOSAMENTE LAS INSTRUCCIONES ANTES DE INTENTAR ARMAR,INSTALAR, USAR O DAR
MANTENIMIENTO AL PRODUCTO DESCRITO.
PROTÉJASE A SÍ MISMOY A LOS DEMÁS CUMPLIENDO CON TODA LA INFORMACIÓN DE SEGURIDAD. EL NO
SEGUIR LAS INSTRUCCIONES PODRÍA RESULTAR EN LESIONES PERSONALESY/O DAÑOS A LA PROPIEDAD.
CONSERVE LAS INSTRUCCIONES COMO FUTURA REFERENCIA.
1. Lea todas las instrucciones antes de usar el Calefactor.
2. Utilice este Calefactor únicamente de la manera descrita
en este manual.Cualquier otro uso no recomendado por
el fabricante podría ocasionar un incendio, un choque
eléctrico o lesiones personales.
3. Asegúrese de que la fuente de alimentación cumpla con
los requerimientos eléctricos del Calefactor.
4. Se debe tener sumo cuidado cuando un Calefactor sea
usado por o cerca de niños o personas minusválidas, y
cuando el Calefactor funcione desatendido.
5. Este aparato tiene la clavija polarizada (un diente es más
ancho que el otro). Esta clavija está diseñada para ser
insertada en un tomacorriente polar de una sola forma a
fin de reducir el riesgo de choque eléctrico.Si la clavija no
encaja totalmente en el tomacorriente, dele vuelta. Si aun
así no encaja, consulte a un técnico electricista. No trate
de modificar estas características de seguridad.
6. Evite el uso de extensiones siempre que sea posible, ya
que pueden sobrecalentarse y presentar un riesgo de
incendio. Si es necesario usarlas, reduzca al mínimo el
riesgo de sobrecalentamiento asegurándose de que estén
certificadas por UL, que sean de calibre 14 AWG como
mínimo y que tengan una capacidad nominal de por lo
menos 1875 watts. Nunca use una sola extensión para
conectar más de un Calefactor.
7. No use ningún Calefactor que tenga el cable o la clavija
dañados ni después de que el Calefactor haya presentado
averías, se haya caído o haya sido dañado de cualquier
manera.LleveelCalefactora uncentro deservicioautorizado
para su revisión, ajuste eléctrico/mecánico o reparación.
8. DesenchufeelcableantesdetrasladarodarservicioalCalefactor.
Siempre desenchufe el Calefactor cuando no esté en uso.
ADVERTENCIA: NO CONFÍE ÚNICAMENTE EN EL
INTERRUPTOR DE ENCENDIDO/APAGADO PARA
DESCONECTARLAENERGÍAALTRASLADARODARSERVICIO
AL CALEFACTOR. SIEMPRE DESENCHUFE EL CABLE.
9. No inserte ni permita la introducción de los dedos o de
objetos extraños en cualquier abertura de ventilación o
escape ya podría ocasionar un choque eléctrico o un
incendio, o dañar el Calefactor.No obstruya ni intervenga
en el funcionamiento del Calefactor de ninguna manera
mientras esté encendido.
10.No obstruya las entradas y salidas de aire de ninguna
manerapara evitarla posibilidadde que ocurra unincendio.
No coloque el aparato sobre superficies suaves, como una
cama,endonde las aberturaspudieran quedarobstruidas.
11.Siempre coloque el Calefactor sobre una superficie
plana, nivelada y estable durante el uso para evitar que
se vuelque. Acomode el cable de tal manera que ni el
Calefactor ni ningún otro objeto le pasen por encima.
No pase el cable por debajo de la alfombra. No cubra
el cable con ninguna alfombrilla, tapete, ni cosa
parecida.Coloque el cable lejos de las zonas de mayor
movimiento dentro de la habitación y donde nadie
pueda tropezarse.
12.Este Calefactor se calienta cuando está en uso. No permita
que la piel desnuda entre en contacto con las superficies
calientesparaevitarquemaduras.Siempreusela manijapara
trasladar este Calefactor. Mantenga los materiales
combustibles,talescomomuebles,almohadas,ropadecama,
papeles, ropa y cortinas, por lo menos a 3 pies (0.9 m) de
distancia de la parte delantera del Calefactor y al menos 1
pie(0.3 m)dedistancia delos costadosyde laparteposterior.
13.Los calefactores contienen piezas calientes que generan
arcos voltaicos o chispas. NO deben usarse en lugares
potencialmente peligrosos, tales como atmósferas
inflamables, explosivas, húmedas o que contengan
productos químicos. Este Calefactor está diseñado para
uso general ÚNICAMENTE.
14.Este Calefactor no debe usarse en lugares mojados ni
húmedos.Nunca coloque el Calefactor en un lugar donde
exista el riesgo de que se caiga al interior de una tina u
otro recipiente con agua.
15. No utilice el Calefactor a la intemperie.
ADVERTENCIA: REDUZCA EL RIESGO DE
INCENDIOS O CHOQUES ELÉCTRICOS – NO USE
ESTE CALEFACTOR CON NINGÚN DISPOSITIVO DE
ESTADO SÓLIDO PARA CONTROL DE VELOCIDAD.
INFORMACIÓN GENERAL DE SEGURIDAD
Al usar aparatos eléctricos, las precauciones básicas de seguridad
deberan siempre de seguirse para reducir el riesgo de incendio, choque
eléctrico, y daño a personas, incluyenda las siguientes.
CONSERVE ESTAS INSTRUCCIONES
This manual suits for next models
3
Table of contents
Other Lasko Heater manuals
Popular Heater manuals by other brands

Stelpro
Stelpro AALUX3 Series user guide

Fox Electronics
Fox Electronics GR2015-R instructions

KORADO
KORADO KORALINE LK Assembly instructions

Twin-Star International
Twin-Star International SH-106 manual

Pakole
Pakole ACR 1000W Operation and Maintenance Documentation

Frico
Frico PA2500C Series Assembly and operating instructions

Auerhaan
Auerhaan Verco G5 Series Installation and maintenance manual

Twin-Star International
Twin-Star International CFI-100-1 user manual

Wetekom
Wetekom 802960 instruction manual

Eltra-Termo
Eltra-Termo PRAMOTRONIC-3D-12 Operation manual

Certikin
Certikin MB055 Operating, installation and servicing instructions

Profile
Profile MARIN manual