lavatools javelin User manual

QUALITY THERMOMETERS
CALIFORNIA USA
javelin

Javelin
° F
01
03 04
02
YOUR JAVELIN

01
PROBE
18/8 food grade
stainless steel
02
LCD
large readout
display
03
MAGNET
for easy
storage
04
LANYARD
hole for quick
attachment

Javelin
GETTING STARTED
Extend the probe and the Javelin is ready
for use.
Sleep Mode
If you leave the Javelin on and idle for more
than 60 minutes, the device will automatically
go to sleep. To get it going again, simply retract
and extend the probe.

MODEL: PT12 LAVATOOLS. CALIFORNIA Assembled in China Javelin
C
R
2
0
3
2
CHANGING THE BATTERY
When the display shows “ERROR” and the
icon, it’s time to switch out your battery.
Fully retract the probe and twist open the
battery door with a coin.
Carefully remove existing battery and insert
a new CR2032 with the positive (+) pole up.

SWITCHING BETWEEN C°/F°
Personalize your Javelin using the C°/ F° switch found inside the
battery bay. Simply twist open the battery door and tap out the
battery to access the switch.
F
C

ADDITIONAL INFORMATION
Magnetic Backing
The Javelin has a built-in magnetic backing to allow for convenient
storage. Magnetic backing may not work on stainless steel surfaces.
Splash Resistant
The Javelin is rated at IP65 splash resistance. This means that it is
protected against low pressure jets if water, such as splashes from a tap.

Tapered Sensor Tip
The ultra-sensitive thermistor sensor is located at the tip of the probe,
requiring a minimum insertion distance of 0.25” (5mm).
Antimicrobial Coating
Silver-based antimicrobial additive is impregnated into the plastic shell to
inhibit the growth of pathogens. Ecacy is rated at 99% or greater.

ACCURACY TEST
To check the accuracy of your thermometer, we recommend
using an ice bath test. To create an iced bath, fully pack a large
cup with crushed ice. Next, fill 3/4 of the cup with purified water.
Let the slurry sit for a brief moment and give it a quick stir to
allow the temperature to equalize throughout. Insert the tip of
the probe into the very center of the cup and stir gently. In 3 to
4 seconds, the display will read within 1°F (0.5°C) of 32°F (0°C).

TROUBLESHOOTING
WON’T SWITCH
ON
retract and extend
probe or change
battery
DISPLAYING
“ERROR”
battery is running low,
change batteries
DEVICE
ASLEEP
retract and extend
probe to wake

USE & MAINTENANCE
• Do not insert the probe all the way to the plastic collar
• Always measure at the center of the meat, avoid hitting bone or hard cartilage
• Prevent bacterial growth by wiping down the probe after each use
• Clean the body with soft damp cloth. Do not use solvents or scouring agents
• Do not put the device in the dishwasher
This device is exclusively intended for the field of application described
in this manual. It should only be used as described within these
instructions. Abuse, water damage, modification, or accidental breakage
to the product will void all warranty.

SAFETY WARNING
• Never leave the device in the oven
• Never place probe directly over fire
• Never immerse the device in liquid for any period of time
• Keep the device and battery out of reach of children
• Do not subject the device to extreme temperature, vibration, or shock
• Batteries must not be thrown into the fire, short-circuited, taken apart or recharged

LAVATOOLS.CO
come visit us for more info