Maverick Redi Chek ET-11 User manual

Thank you for selecting Maverick’s Redi Chek ET-11
Direct+Connect Roasting Thermometer. Turn your iPhone,
iPad, Android or Tablet into a roasting thermometer by
following these simple instructions.
ET-11 Redi Chek
Direct+Connect
Roasting
Thermometer

Step 2:
Slide off the Redi Chek ET-11 Thermometer battery cover as
directed by the arrow. Insert the CR2032 battery (included),
plus side up. Slide the battery cover back in place until
it clicks.
Back of the Redi Chek ET-11
Direct+Connect Roasting Thermometer (shown here)
2
GETTING STARTED
Step 1:
Preheat the oven to your desired
roasting temperature.
C
R
2
0
3
2
3 VOLT
BATTERY
Suction
Cup
Smart Device
Jack
Probe Jack
Battery
Cover
White
Plastic
Probe Tip
Protector
Probe
Holder
Battery Goes Here

3
Front of the Redi Chek ET-11
Direct+Connect Roasting Thermometer (shown here)
White Plastic
Probe Tip Protector
Smart Device
Jack
Probe
Jack
Probe
Holder

4
Step 3:
On your iPhone, iPad, Android or Tablet, go to the Apple App
Store or Google Play Store to download the Free RediCheck
ET-11 app.When searching for the app, make sure to type
RediChek as one word. Once you have successfully
downloaded the RediChekET-11 app, open it.
RediChekET-11 app icon
Step 4:
Plug the smart device jack securely into the port of your
smart device. Now plug the probe jack securely into the port
of the Thermometer base unit.

5
Step 5:
Now you are on the Redi Chek ET-11 monitor screen (A). Press
Settings in the upper right corner. Now you are on screen (B).
Step 6: (Preset Doneness Temperature Option)
Tap 0Cor 0Fto set desired Temperature mode. You are now
in Preset mode. Scroll down the left side of the screen to
select the food to be cooked. Scroll down the right side of the
screen to set temperature doneness. The Temperature Set
will appear in the center of the screen. Tap Done in the top
right corner.
(A) (B)

Step 7: (Manual Doneness Temperature Option)
Tap 0Cor 0Fto set desired Temperature mode. Tap Manual
which brings you to screen (C). Now press Peak. Under
Temperature Set, scroll to set the desired doneness
temperature. Tap Done in the top right corner.
(C)
6
(B)

Step 8:
Tap Settings in upper right corner of screen (A). You are now
on screen (B). Tap Sound.
7
(A) (B)

8
Step 9:
You are now on screen (E). Scroll through the preset Sound
Settings. You can tap the arrow on the lower left side to listen
to each sound. Select your preferred alert sound, then tap
Done at the top right corner. To record your own voice as the
alert, scroll down to Customize 1 and tap the Microphone
Icon on the lower right side. Press OK then unplug the probe
from your device. Tap the arrow to record your message,
then press Done at the top right corner. Re-insert the probe
securely into your device.
(E)

9
Step 10:
Now you are back on screen (B). Tap Pre-Alert to select the
optional Time or Temp Pre-Alert signal.
You are now on the Pre-Alert screen (F). Tap Time then scroll
to set hours / minutes you want to be alerted in advance of
the finished set temperature.
(B) (F) Time

10
Now Tap Temp, then scroll to select how many degrees in
advance of the set finished temperature you want to be
alerted. Press Done. This will return you to Preset (screen B).
(F) Temp (B)
Note: To change or adjust the Time or Temperature settings,
press the arrow on top left of screen to return to the Home
Screen. Press Cancel in the center circle. Press Settings at
top right corner to reset options.