LAVAZZA Jolie & Milk User manual

ISTRUZIONI PER L’USO
OPERATING INSTRUCTIONS
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
INSTRUCCIONES DE USO
INSTRUÇÕES DE UTILIZAÇÃO
LEGGERE
ATTENTAMENTE
LE ISTRUZIONI
READ THE
INSTRUCTIONS
CAREFULLY
LIRE
ATTENTIVEMENT
LES INSTRUCTIONS
DIE
BEDIENUNGSANLEITUNG
AUFMERKSAM LESEN
LEER ATENTAMENTE
LAS INSTRUCCIONES
LER ATENTAMENTE
AS INSTRUÇÕES

2
Congratulazioni!
Gentile Cliente ci congratuliamo per aver scelto la macchina da caffè espresso Lavazza A MODO MIO e la ringraziamo
per la fiducia accordataci.
Prima di mettere in funzione la macchina, consigliamo di leggere attentamente le istruzioni per l’uso che spiegano come
utilizzarla, pulirla e mantenerla in perfetta efficienza. Non ci resta che augurarle la preparazione di tanti ottimi caffè grazie
a Lavazza!
Welcome!
Dear Customer thank you for purchasing the Lavazza A MODO MIO espresso coffee machine and for choosing our
company.
Before operating the machine, we recommend you carefully read the operating instructions that explain how to use, clean
and maintain it in perfect working order. We hope you enjoy brewing authentic Italian coffee, thanks to Lavazza!
Félicitations!
Cher Client, vous avez choisi le système espresso Lavazza A MODO MIO et nous vous remercions de votre confiance.
Avant de mettre votre machine en marche, nous vous recommandons de lire attentivement ce mode d’emploi. Il vous
explique comment utiliser, nettoyer et conserver votre machine en parfait état de fonctionnement. Nous vous souhaitons
d’intenses moments de dégustations.
Herzlichen Glückwunsch!
Sehr geehrter Kunde, wir gratulieren Ihnen zum Kauf dieser Espresso-Maschine Lavazza A MODO MIO und wir danken
Ihnen für das Vertrauen, das Sie uns entgegenbringen. Bevor Sie die Maschine in Betrieb nehmen, empfehlen wir Ihnen,
die Gebrauchsanweisung aufmerksam zu lesen, in der der Gebrauch, die Reinigung und die Pflege beschrieben werden.
Nun wünschen wir Ihnen viel Spaß bei der Zubereitung von vielen köstlichen Kaffees mit Lavazza!
¡Enhorabuena!
Estimado cliente, enhorabuena por haber elegido la máquina de café espresso Lavazza A MODO MIO y gracias por
confiar en Lavazza. Antes de poner la cafetera en marcha, le aconsejamos que lea atentamente las instrucciones de uso,
donde se explica cómo utilizarla, limpiarla y mantenerla en condiciones óptimas.
¡Le deseamos que disfrute preparando infinidad de cafés excepcionales gracias a Lavazza!
Parabéns!
Estimado cliente, felicitamo-lo por ter escolhido a máquina de café espresso Lavazza A MODO MIO e agradecemos a
confiança que depositou em nós.
Antes de colocar a máquina em funcionamento, aconselhamos que leia atentamente as instruções de utilização que
explicam como a mesma deve ser utilizada, limpa e mantida de forma perfeitamente eficiente. Só nos resta desejar-lhe a
preparação de muitos óptimos cafés graças à Lavazza!

ITEN
32
Power supply cable:
Do not operate the coffee machine if the power cord is damaged. If the power
cord is damaged, it must be replaced by the manufacturer (or the latter’s techni-
cal service staff) or, in any case, by a person duly qualified to do that, in order to
prevent any risk. Do not pass the power cable for angles and sharp edges, over
very hot objects, and protect it from oil. Do not carry or pull the coffee machine
holding it by the power cord. Do not remove the plug by pulling the power cord,
do not touch it with wet hands. Power cord should not hang loose from tables
or shelves.
Danger of electrocution:
Live parts should never come into touch with water. Do not immerse the ma-
chine.
Protect children under 8 years of age:
Prevent children from playing with the machine. Children are not aware of the
risks related to electric household appliances. Do not leave the machine pack-
aging materials within the reach of children.
Danger of burns:
Do not touch the hot parts (cartridge holder group) of the machine immediately
after use. While dispensing the drink, pay attention to any possible splashes of
hot liquid.
Cleaning:
Before cleaning, unplug the machine and let it cool down. Do not immerse the
machine in water! It is strictly forbidden to tamper with the internal parts of the
machine. Change the water in the tank if not used for 3 days. To prevent dam-
age to the appliance do not use alkaline cleaning agents when cleaning, use a
soft cloth and a mild detergent.
SAFETY

EN
33
Storing the machine:
If the machine remains inactive for a long time, unplug it and store it in a dry
place out of reach of children. Keep it protected from dust and dirt.
Servicing / Maintenance:
In case of failure, problems or a suspected fault resulting from falling of the
machine, immediately unplug the machine. Do not attempt to operate a faulty
machine. Servicing and repairs can only be performed by Authorized Service
Centres. All liability for damages resulting from work not carried out by profes-
sionals is declined.
Water tank:
Fill the tank only with fresh, non-sparkling, drinking water. Do not operate the
machine if the water is not at least above the minimum level indicated on the tank.
Capsule compartment:
This machine can only be used with compatible capsules; do not put your fingers or
any other object in the capsule compartment. The capsules can be used only once.
Machine disposal at the end of its operational life:
INFORMATION FOR THE USER: the symbol of the crossed-out wheeled bin
on the appliance or its packaging indicates that the product must be disposed of
separately from other waste at the end of its operational life.
The user must therefore take the appliance to be disposed of to an appropriate
separate collection centre for electrical and electronic equipment.
Appropriate separate collection for the dismantled appliance being subsequent-
ly sent out for recycling, treatment and for environmentally friendly disposal,
contribute to the prevention of possible negative effects on the environment
and on human health, and encourage recycling of the materials the appliance is
made of.
Specific administrative sanctions provided for by current regulations will be ap-
plied for illicit disposal of the product by the user.
SAFETY

ITEN
34
• Machine
• Welcome kit consisting of 9 assorted
Lavazza A MODO MIO e brochure Lavazza A MODO MIO
MACHINE COMPONENTS
* The characteristics and the package content can vary according to the target market.
PACKAGE CONTENT *
Power supply cable
• Instruction booklet
• Quick guide
• Warranty sheet
Water tank
Water tank cover
Switch-on / Long espresso
supply button
Switch-on / Short espresso
supply button
Capsule insertion space
Capsule loader
lever
Coee
dispensing unit
Used capsule
drawer
Drip tray grill
Drip tray
Label
Cover
Seal
Whisk
Milk frother
Multifunction button
Base connector
Base milk frother

EN
35
No liability is held for damage caused by:
• incorrect use not in accordance with the intended
purposes;
• repairs not carried out by authorized service
centres;
• tampering with the power supply cable;
• tampering with any parts of the machine;
• the use of non-original spare parts and accessories;
• failure to descale;
• storage at temperatures below 4°C (39,2°F);
• use in places with temperature below 10°C (50°F)
or above 40°C (104°F);
• use in places with relative humidity above 95%;
• use of capsules others than indicated.
In these cases, the warranty is not valid.
STARTING THE MACHINE
Place the coffee machine on a flat and stable surface,
far from water and heat sources. Machine damages
due to non-observance of these indications are not
covered by warranty.
Remove any packaging materials and check that all com-
ponents are present.
Lift and remove the cover, then the water tank itself.
Rinse the tank before using it.
Fill the water tank up to the MAX level indicated, using
only fresh drinking water. Fit the tank back into place,
then close by using the cover.
MACHINE SETTING
Hot water and other liquids can damage the tank
and the machine. Do not operate the machine with-
out water: make sure that there is enough water in
the tank.
Max
Min

ITEN
36
The coffee machine starts the heating cycle. The switch-
on/supply buttons will start blinking to a light white.
During the heating cycle, you can book the drink, pressing
one of the switch-on /supply buttons. The drink will be
released after the end of the heating cycle.
The machine will be ready for use when the switch-on/
supply buttons light up to a steady white light white light.
At first power-on, supply at least 0.5 litres of water
without capsule placing a container under the coffee
spout.
STAND-BY FUNCTION
To ensure the energy conservation the machine automat-
ically passes to the stand-by mode after 9 minutes of not
being used. The machine can be set to the stand-by mode
manually, first of the 9 minutes’ time, by keeping both but-
tons pressed down for at least 3 seconds. This mode is in-
dicated by the switching off of the buttons. The machine
can be reactivated by pressing the buttons again.
The machine rear features two outlets that can be used
for the power cord. You should use the most suitable
outlet for your needs.
Fit the supply plug into the power outlet.
Press one of the switch-on/supply buttons to switch
the macchine on.
MACHINE SETTING
> 3SEC

EN
37
This appliance has only been designed to heat and
froth milk. Do not put any other types of liquid or
solid substances in the container, other than those
indicated by Lavazza. Do not leave the milk frother
unguarded when operating. Do not leave the milk
frother unattended when in use.
Make sure the base contact area is clean and dry.
MACHINE SETTING
STARTING THE MILK FROTHER
Before the appliance is used for the first time, or after
extended periods of non-use, it should be thoroughly
cleaned as described in the section “MAINTENANCE
AND CLEANING”.
This appliance can only be operated with original
accessories provided by the manufacturer. No li-
ability will be assumed for any damage caused by
misuse of the milk frother or non-compliance with
the instructions contained in this manual.
The first time you use the milk frother, remove all card-
board and plastic packaging. Insert the milk frother on
the power base, make sure to position it correctly.
When inserting the milk frother on the power base, the
appliance will sound a long acoustic signal.

ITEN
38
MACHINE SETTING
FILLING AMOUNT
Always respect the level marked inside the container.
Do not operate the milk frother with an empty con-
tainer or with a quantity of milk below the MIN level
(60 ml). This can cause the appliance to overheat.
In case of overheating, the appliance will automat-
ically turn off. Do not fill the milk frother over the
MILK level, it may cause hot milk to splash.
To warm and whisk milk, fill the milk frother to max. 120
ml (FOAM level).
To warm and blend milk, fill the milk frother to max. 180
ml (MILK level).
FOAM
MILK
MIN.
INSERT ACCESSORIES
Do not use the milk frother without inserting the
whisk.
Remove the milk frother cover.
Insert the whisk inside the milk frother.
Put the cover on the milk frother.

EN
39
MACHINE SETTING
CLEAN CYCLE FIRST USE
Before using the appliance carry out a preliminary clean-
ing cycle.
Remove the cover and fill the milk frother with fresh,
non-aerated drinking water up to the MILK level mark
(120 ml).
Put the cover on the milk frother.
Press the multifunction button to start the cleaning cycle.
The appliance sounds a double acoustic signal to indi-
cate the end of the cleaning cycle.
Remove the milk frother from the base, empty it and
clean all the components.
1CLICK

ITEN
40
PREPARING THE COFFEE
ESPRESSO DELIVERY
Make sure that the switch-on/supply buttons lights up to
a steady white light.
Never put fingers or objects in the capsule-holder.
Only Lavazza or compatible capsules
must be introduced in the capsule-holder.
Single-dose capsules are prepared to dispense one
coffee/product. DO NOT use the capsules more
than once. Inserting two or more capsules can cause
the machine to malfunction.
Place the cup under the coffee dispenser for a classic
espresso.
Remove the drip tray to use cups of different sizes for
a long coffee.
If power supply is interrupted during the coffee supply
cycle, restore power supply and restart the coffee supply
procedure.
If during the supply cycle, water lacks in the tank, water
lack will be indicated by white steady LED on the selected
button, while the LED on the other button will start flash-
ing, then proceed as follows:
-Fill the water tank up to the MAX level indicated.
-Press the power-on/supply button previously selected.
The button will start flashing and the coffee supply pro-
cedure will restart.
After 5 supplies the switch-on/supply buttons start
blinking fast with white light to indicate that the capsules
drawer is filled. Empty the capsules drawer and press one
of the buttons to reset the machine. Now the machine is
ready for a new supply.

EN
41
PREPARING THE COFFEE
Lift the pod loading lever until it locks into position to
open the pod fitting compartment.
Put a Lavazza capsule into the capsule
fitting compartment.
Lower the pod loading lever to close the pod fitting
compartment.
Press the short espresso (30 cc) or long espresso button
(60 cc) to start delivery. The machine will stop delivery au-
tomatically when the programmed measure is reached.
The switch-on/supply button will light up to a blinking white
light when the product is being supplied. To supply the prod-
uct again, wait for the switch-on/supply button to light up to a
steady white light.

ITEN
42
PROGRAMMING THE MACCHINE
Press and hold one of the two coffee delivery buttons
for at least 3 seconds. The selected key will flash and
the coffee machine will enter the programming mode.
Once the desired amount of coffee has been obtained,
stop supply by releasing the button.
If the programmed measure exceeds the maximum al-
lowed (250 cc) the machine will automatically stop deliv-
ery, the delivery button will blink and the last pro-
grammed measure will be saved in the memory. If there
is a power failure during programming, the last pro-
grammed value remains in the memory. If during a dose
programming, water lack is indicated, the machine stops
the supply and the dose being programmed won’t be
saved. Once filled the water tank, repeat the dose pro-
gramming procedure.
COFFEE DOSE PROGRAMMING
Measures are always programmed using the same button;
any other buttons are ignored. The programmed amount
of brewed coffee can be changed by repeating the pro-
gramming.
Lift the pod loading lever until it locks into position to
open the pod fitting compartment.
Put a Lavazza capsule into the capsule
fitting compartment.
Lower the pod loading lever to close the pod fitting
compartment.

EN
43
HEAT AND FROTH MILK
Remove the milk frother cover and insert the whisk in-
side the milk frother.
Pour milk into the milk frother in an amount between the
MIN level mark and the FOAM level mark.
To get the best results, use cold milk from the fridge.
Do not fill the milk frother beyond the FOAM level
(120 ml), otherwise milk may come out.
For optimal warm milk foam, we recommend using un-
skimmed milk (pasteurized or UHT), refrigerated (4-8°C).
Do not use milk at room temperature.
Put the cover on the milk frother and position the milk
frother on the base.
Make sure the lower side of the milk frother and the
base are dry.
PREPARATION OF MILK-BASED RECIPES
Press the multifunction button once briefly.
The lid must always be inserted during operation.
Do not remove the milk frother from the base be-
fore completing the cycle.
After about 1-2 seconds, the appliance sounds a brief
acoustic signal.
The multifunction button comes on with white light
flashing.
The appliance starts the preparation.
The whisk process stops automatically when milk is
warm enough.
1CLICK

ITEN
44
Open the lid and pour the frothed milk into the cup.
Make sure the whisk is in the milk frother while milk
is poured into the cup.
Ensure the appliance is disconnected from the
power outlet and that it has cooled down before
cleaning. For more detailed information, refer to
“MAINTENANCE AND CLEANING”.
The appliance emits a double beep to indicate the end
of the frothing cycle.
The multifunction button turns off.
Remove the milk frother from the base.
PREPARATION OF MILK-BASED RECIPES

EN
45
Press the multifunction button twice quickly.
The cover must always be inserted during operation.
Press the multifunction button twice quickly. The
second click must be within one second from the
first one.
Do not remove the milk frother from the base be-
fore completing the cycle.
The appliance emits a double beep.
The multifunction button comes on with white light
flashing slowly.
The appliance starts the preparation.
PREPARATION OF MILK-BASED RECIPES
HEAT MILK
Remove the milk frother cover and insert the whisk in-
side the milk frother.
Pour milk into the milk frother in an amount between the
MIN level mark and the MILK level mark.
To get the best results, use cold milk from the fridge.
Do not fill the milk frother beyond the MILK level
(180 ml), otherwise milk may come out.
For optimal result, we recommend using unskimmed
milk (pasteurized or UHT), refrigerated (4-8°C). Do not
use milk at room temperature.
Put the cover on the milk frother and position the milk
frother on the base.
Make sure the lower side of the milk frother and the
base are dry.
2CLICK

ITEN
46
PREPARATION OF MILK-BASED RECIPES
The heating process ends automatically when the milk is
sufficiently hot.
The appliance emits a double beep to indicate the end
of the heating process.
The multifunction button turns off.
Remove the milk frother from the base.
Open the cover and pour the warm milk into the glass.
Make sure the whisk is in the milk frother while milk
is poured into the cup.
Ensure the appliance is disconnected from the power
outlet and that it has cooled down before cleaning.
For more detailed information, refer to “MAINTE-
NANCE AND CLEANING”.

EN
47
FROTHING COLD MILK
It is possible to froth milk without having to heat it up. Pro-
ceed as shown in points to in section “HEAT AND
FROTH MILK”.
For optimal cold milk foam, we recommend using skimmed
milk (pasteurized or UHT), refrigerated (4-8°C). Do not
use milk at room temperature.
Press and hold the multifunction button for at least 3
seconds.
The appliance emits a long sound.
The multifunction button turns on with a quick white
flashing light.
The appliance starts the preparation.
PREPARATION OF MILK-BASED RECIPES
After a minute the frothing process ends automatically.
The appliance emits a double beep to indicate the end
of the frothing cycle.
The multifunction button turns off.
Remove the milk frother from the base.
> 3SEC

ITEN
48
PREPARATION OF MILK-BASED RECIPES
Open the lid and pour the frothed milk into the cup.
Make sure the whisk is in the milk frother while milk
is poured into the cup.
TEMPORARY OR FINAL INTERRUPTION OF
THE CYCLE
To stop preparation, press the multifunction button
again.
To resume preparation, press the multifunction button
again.
If the milk is sufficiently hot at the moment of the inter-
ruption of the process, the appliance will not be able to
be restarted.
The multifunction button will come on with red light
flashing.

EN
49
MAINTENANCE AND CLEANING
CLEANING THE MACHINE
Never use solvents, alcohol or other aggressive sub-
stances or ovens for drying the coffee machine compo-
nents.Washmachinecomponents(electriccomponents
excluded) with cold/lukewarm water and non-abrasive
clothes/sponges. All removable components can be
cleaned by using a dishwasher. Do not leave water in the
tank and water circuit for more than 3 days. If this is the
case, drain the tank and circuit, rinse it and refill it with
fresh water, then carry out a delivery without capsule
before making any coffee or other beverage.
COFFEE DISPENSER CLEANING
To clean the dispenser, perform a weekly COFFEE
BREWING procedure without inserting the capsule.
CLEANING THE POD COLLECTING DRAW-
ER AND THE DROP COLLECTING
Take off the drip tray and remove the drip tray grill.
The used pod collecting drawer and the drop collecting
drawer should be emptied and cleaned after making cof-
fee 4/5 times or every two/three days.
Remove and empty the used pod collecting drawer.
Clean and dry all parts before putting them back.
Regularly verify that the used pod collecting drawer and
the drop collecting drawer will not be full, to avoid ma-
chine malfunctions and damage.