LAZBOY Sawyer Recliner User manual

Page 1 of 6
Sawyer Recliner
Owner’s Manual
If you have any problems with this product, DO NOT RETURN IT TO THE STORE.
CALL OUR CUSTOMER SERVICE HOTLINE AT
[phone]
8am-5pm (EST), Monday - Friday
La-Z-Boy® is a registered trademark of La-Z-Boy Incorporated and is used under license to
BJI,Inc. © 2017 La-Z-Boy Incorporated.

Page 2 of 6
For warranty and other helpful information, please visit www.lazboyoutdoor.com or call 1-877-592-7514,
Monday-Friday, 8AM-5PM (EST) or email us at [e-mail].
Care and Maintenance
Be careful to never allow water to build up in frames as this will cause corrosion and freeze damage in cold
climates. Wash all frames with a solution of mild soap and water. Rinse with clean water and dry with a soft
absorbent cloth towel. Frames can be treated with a liquid wax for maximum protection against UV rays and/or
salty damp air. If your set includes cushions, slings, and/or an umbrella they may be cleaned by hand with a
solution of soap and water with a clean water rinse. (Never machine wash cushions, slings or umbrella covers
as this will result in shrinkage or damage).
After cleaning cushions tip on end and allow to drip dry. (Never use a commercial or home dryer to tumble dry
fabric goods).
Do not use bleach or solvents to clean any product! This will void the warranty.
Lack of original receipt will void warranty!
CAUTION: Read all the instructions before assembly. Failure to do so may result in faulty assembly and
potential injury!
Assemble product on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging the item.
Seek assistance to assemble bulky or heavy items. After final alignment, make sure all bolts and nuts are
securely tightened with screw head covers pressed in place.
Note: Do not allow children to play with plastic wraps or small parts to prevent potential choking hazard.

Page 3 of 6
Important Safety Instructions:
Important: Read these instructions thoroughly before using
WARNING
•Do not operate the unit until the back is installed and locked.
•Closely supervise children and disabled persons using this product.
•Sit down in the unit slowly. To avoid tipping, do not throw weight against the back of the unit. Move the
unit into or out of the reclining position slowly, making sure that no children or pets are in close proximity.
•This product has many moving parts, serious injury can occur if not used properly. Keep hands, fingers
and body parts away from the mechanism. To reduce the risk of head entrapment and other injuries, keep
children and pets away from openings and moving parts in and around furniture.
•Only the occupant should operate the unit. Never attempt to open the leg rest by pulling on it.
•Do not stand, sit or place extra weight on the arms, back or leg rest.
•To safely exit the unit and prevent a tripping hazard, bring the back upright and close the leg rest.
•Do not use this product if it is damaged. Do not use attachments or substitute parts.
•Provide a clear path for operation of the back and leg rest. Place tables and area rugs at a distance to
allow the leg rest to fully extend without rubbing or interference.
•This product is not intended for use as a health care device.
•Use care when moving the product, before lifting the product, secure the mechanism to prevent
unexpected opening or movement. Never move the product by the mechanism, leg rest or reclining back.
Disconnect modular units. Securely grip non-moving parts only.
•Keep hands away from the internal frame parts. (See Figure 1 and Figure 2)
Figure 1 Figure 2
•This product is not intended for use as a health care device.
•Always keep open flame and lit cigarettes away from outdoor furniture. Outdoor furniture may
burn rapidly with toxic gas and thick smoke.

Page 4 of 6
PARTS LIST
PART#
DESCRIPTION
PICTURE
Q’TY
A
Body
1
B
Back
1
C
Seat Cushion
1
D
Back Cushion
1
E
Toss P i llow
1

Page 5 of 6
Assembly Steps:
Step 1. Lay the chair back (B) across the arms of the chair body(A). Lift the chair back (B) at a
slight angle and align the brackets on the chair back (B) with the brackets on the chair body(A).
See Figure 3.
Figure 3
Step 2. Lower the chair back (B) onto the chair body (A) ,making sure the chair back (B) and the
chair body (A)are completely engaged. To make sure the chair back (B) is properly installed with
both sets of back and body brackets engaged, stand behind the chair and pull the chair back(B).
If one or both sides move out of position, the brackets are not engaged. Remove the chair back
(B) and repeat the steps. See Figure 4.
Figure 4
Step 3. Put the seat cushion (C), back cushion (D) and toss pillow (E) on the recliner frames.
See Figure 5.
Figure 5

Page 6 of 6
Recliner Chair Operating Instructions
To Operate the Leg Rest:
1.The recliner chair is equipped with a two-position locking leg rest for customized seating
comfort. Simply put physical strength on the back and armrest to extend the recliner
mechanism. You may stop in any one of two positions. The closed position is for relaxing
reading (Figure 6). The 1st position is slightly inclined for comfortable viewing (Figure 7). The 2nd
position is slightly more inclined for comfortable sleeping (Figure 8).
2.Bring the back upright by closing the leg rest before getting out of the unit.
Figure 6 (the closed position) Figure 7 (the 1st position)
Figure 8 (the 2nd position)