Leafield Environmental Envirocup Grande User manual

PPE Always wear appropriate PPE
equipment and follow safety guidelines.
Quality Standards All Leafield Environmental
products are certificated to BS EN ISO
www.leafield-environmental.com
[e-mail]
Envirocup
EnvirocupEnvirocup
Envirocup Grande
GrandeGrande
Grande
.
ey as provided
Tools
ToolsTools
Tools
Standard 18” plastic refuse sack
User Guide
User GuideUser Guide
User Guide
LEAFIELD Recycling Products

Lift out the cup stacker moulding and
place to one side
As you lit out the stacking moulding the
cups will remain in the plastic sack
With the stacking unit removed the cups
can be collected in the plastic sack
Remove the lid and place to one side
www.leafield-environmental.com
[e-mail]
Unlock the cup bin lid
1
11
1
he lock barrel will pop out to show that it
is in the unlocked position.
wist the lid anti-clockwise to disengage
the bayonet fitting
2
22
23
33
3
Removing the
Removing the Removing the
Removing the Lids &
Lids &Lids &
Lids & Liquids liners
Liquids linersLiquids liners
Liquids liners
Unlocking
UnlockingUnlocking
Unlocking
Remove the liquids liner & empty the
contents
5
55
5
Remove the cup lids liner and empty
contents for recycling
6
66
6
7
77
7
Remove the cups
Remove the cups Remove the cups
Remove the cups
8
88
89
99
9

Note the two alignment features on
the cup stacking moulding
Note the position of the lid locating lugs on
the bin body
www.leafield-environmental.com
[e-mail]
Lift the back containing the cups out of the
bin and put to one side for recycling
Replacing the cup holder
Replacing the cup holderReplacing the cup holder
Replacing the cup holder
Collect the Cups
Collect the CupsCollect the Cups
Collect the Cups
Stretch the neck of the sack over the rim
of the bin body
10
1010
10
11
1111
11 12
1212
12 13 1313
13
1
11
1
Push the inside of the bag against the
internal walls of the bin to dispel any
trapped air
15
1515
15 16
1616
16
Place a new plastic sack in the bin body
Replacing the cup holder (Continued)
Replacing the cup holder (Continued)Replacing the cup holder (Continued)
Replacing the cup holder (Continued)
hese can be found below the arrow
indicators on the top of the cup stacker

Replace the empty liquids liner with the
spout located in one of the 5 alignment
indicators
www.leafield-environmental.com
[e-mail]
Photo showing cup stacker alignment
recess and bin body alignment lug in line
Replacing the liquids liner and lids liner & Lid
Replacing the liquids liner and lids liner & LidReplacing the liquids liner and lids liner & Lid
Replacing the liquids liner and lids liner & Lid
Replace the empty lid liner Locate the lock alignment bezel on the bin
body
17
1717
17 18
1818
18
Replacing the cup holder (Continued)
Replacing the cup holder (Continued)Replacing the cup holder (Continued)
Replacing the cup holder (Continued)
Photos showing cup stacker in place in the bin body with screw heads aligned
with arrows
19
1919
19 20
2020
20 21
2121
21
Replacing the Lid
Replacing the LidReplacing the Lid
Replacing the Lid
Locate the lock and the bayonet feature
on the lid
When replacing the lid align the lid
bayonet feature with the body bayonet
feature shown above
wist the lid so that the lock aligns with
the body lock alignment bezel. Push the
lock body to engage lock
22
2222
22
23
2323
23 2
22
2