Leafield Environmental Envirobin Mini User manual

Cleaning Products should be flushed with
clean water and then washed with a mild
detergent solution using a bristle brush or
sponge. Care should be taken not to apply
undue pressure that may damage labels.
Flush clean with water after washing.
Tools
1 2 3
Turn key anti clockwise to unlock lid. Lift lid from the front end, tilting backwards to
free from rear locator.
With two hands lift the lid clear of the body &
put to one side.
Removing the lid (for non-lockable options ignore steps 1 & 9)
Please Note: Leafield does not operate a refuse collection system. This must be arranged by
the customer.
User guidelines
Mini & Midi Envirobin
LEAFIELD Key
PPE Always wear appropriate PPE
equipment and follow safety guidelines.
Quality Standards All Leafield Environmental
products are certificated to BS EN ISO

5 6
Locate sack around the rear of the body.
Slide the edges of the sack into the gap in the
moulding.
Pull the sack taught and locate around the up
stand at the front of the body
Sack is taught and secured in bin body
Inserting Sack
Replacing lid
7 8 9
Locate the rear peg of the lid under the lip at
the back of the body.
Allow the lid to drop into position ensuring the
front peg locates in the body.
Push the lock firmly fixing the lid in place.
4
[e-mail] www.leafield-environmental.com
Fitting signage
Components shown are per bin
• 1 x sign assembly
•2x Sign support rods
Looking down from the top of the
bin there are two blind holes atthe
back insert into each hole one sign
carrying rod push firmly into place
Once the two sign carrying rods are in place line
the two holes in the bottom of the sign assembly
with the sign rods and push the assembly down
until it stops the sign is now ready for use
7
12
3
4 5