Lean Kiosk Systems LKS-TM001 User manual

LKS-TM001 LKS-TM001A LKS-TM001A-X LKS-TM001K LKS-TM001T LKS-TM001W
User Manual
Temperature Measurement and Face Recognition
Machine

Temperature Measurement and Face Recognition Machine User Manual
2
Contents
Part 1: Product Warranty.................................................................................................................................................. 3
Warranty description..................................................................................................................................................... 3
Warranty Period.............................................................................................................................................................3
Disclaimer..................................................................................................................................................................... 4
Part 2: Product Introduction............................................................................................................................................. 4
Product Overview..........................................................................................................................................................5
Product Specifications...................................................................................................................................................5
Port description............................................................................................................................................................. 6
Electrical Performance..................................................................................................................................................6
Work Environment........................................................................................................................................................ 6
Body Temperature Display........................................................................................................................................... 6
Application Scenarios................................................................................................................................................... 7
Installation Modes.........................................................................................................................................................8
Part 3: Functions and Operations on the Client Interface........................................................................................... 13
Introduction to the main interface...............................................................................................................................13
Login Interface............................................................................................................................................................ 15
Setting Interface.......................................................................................................................................................... 15
User List Interface.......................................................................................................................................................17
Part 4: Service Platform Operations...............................................................................................................................18
Overview.................................................................................................................................................................... 18
1.1. Terminology.................................................................................................................................................... 18
1.2. System Requirements......................................................................................................................................18
1.3. Multilingual Support.......................................................................................................................................18
1.4. System Login.................................................................................................................................................. 18
1.5. Description of the Main Interface...................................................................................................................19
1.6. Device Access Process....................................................................................................................................20
1.7. Rights Management Model.............................................................................................................................20
SaaS Management Functions......................................................................................................................................20
1.8. SaaS Management Functions..........................................................................................................................21
1.9. SaaS Customer Management.......................................................................................................................... 21
1.10. Device Registration.....................................................................................................................................24
Customer Management Functions.............................................................................................................................. 25
1.11. System Management.......................................................................................................................................25
1.12. Device Management................................................................................................................................... 32
1.13. Staff Management.......................................................................................................................................34
1.14. Alarm Management.................................................................................................................................... 36
1.15. Record Management................................................................................................................................... 37

Temperature Measurement and Face Recognition Machine User Manual
3
Temperature Measurement and Face Recognition Machine
Part 1: Product Warranty
■ Warranty description
The temperature measurement and face recognition machine is guaranteed by LKS for its defects in
workmanship and materials. The warranty period is one year from the date of original purchase. Parts
that prove to be defective within one year shall be repaired or replaced at LKS's discretion.
If the customer returns the parts to LKS for repair or replacement, please call LKS after-sales
technical support at 4006905904 to inform the part model and obtain the return address. LKS shall
carefully and strictly test the repaired or replaced parts before returning them to the customer, and
deliver the parts to the destination by reasonable commercial means.
LKS after-sales office service telephone: [phone] (office hours: 8:30 a.m. to 9:00 p.m. Beijing
time from Monday to Sunday):
No warranty under the following conditions: rust or corrosion caused by humans, damage caused by
accidents, inappropriate handling or operation, improper maintenance, transportation damage, abuse,
misuse, unauthorized repair or attempted repair, intentional damage or "natural disaster". In addition, the
use of unauthorized paper or other unauthorized components and/or supplies will void the warranty.
■Warranty Period
Parts shall be warranted and replaced free of charge for one year. The freight free shall be paid by the sender. If you
require on-site service from LKS technicians, you shall pay the travel expenses.
For parts out of the one-year free warranty period, you shall bear all the costs, including the round-trip freight and
Remote thermometer
Temperature measurement and face recognition machine
Sheet metal bracket
Decorative light bar
Base

Temperature Measurement and Face Recognition Machine User Manual
4
miscellaneous duties for shipping parts.
■Disclaimer
LKS shall not assume patent liability for the use of the information contained herein, and shall not be liable for
any damages arising from the use of the information contained herein.
LKS shall not be liable for any loss or consequence caused by the misuse, abuse or unauthorized modification,
repair or change of LKS temperature measurement products purchased by users, or failure to strictly abide by the
operation and maintenance instructions of LKS products.
Part 2: Product Introduction
Model
Date
Revision Description
LKS-TM001
LKS-TM001A
LKS-TM001K
LKS-TM001T
LKS-TM001W
LKS-TM001A-X
April 2020
Temperature Measurement Machine
Installation Manual 20.20.01
Temperature
measurement
Face
recognition
Alarms
Mask
detection

Temperature Measurement and Face Recognition Machine User Manual
5
■Product Overview
▶High-performance, high-reliability, and high-stability Android system
▶Cutting-edge deep learning algorithm used as the core
▶Standard local 20,000 faces database, face recognition accuracy > 99.97%, recognition speed < 100 ms
▶Binocular living anti-counterfeiting, preventing photo and video deceptions
▶8-inch A-gauge LCD, projected and capacitive touch screen technology, and full-screen operation interface
▶Adopt 2 million intelligent wide dynamic sensor face recognition camera
▶2 million intelligent wide dynamic sensor, which supports strong light, backlight, and dark complex light
environments
▶Body temperature measurement, temperature display, and automatic alarm generation for abnormal
temperatures
▶Infrared and TGB double light compensation, and weak light identification without interference
▶Optional wired/Wi-FI/4G communication
▶Multi-language broadcasting
■Product Specifications
Model
LKS-TM001 LKS-TM001W LKS-TM001A LKS-TM001K LKS-TM001T
LKS-TM001A-X
Operating system
Android 7.1.2
Camera
2 million wide dynamic, live dual cameras, strong backlight resistance
Touch screen
Capacitive touch screen, 8-inch A-gauge LCD (16:10)
Display resolution
1280 x 800
Camera resolution
1280 x 720
CPU
Quad core RK3288
ARM-A17 1.8GH，GPU:Mail-T764
Storage
Memory: 2G Storage: 8G
Authentication
mode
Face recognition, temperature measurement, optional IC card, ID card
Measurement range
35.5℃—42℃（Non-medical product features）
Temperature
measurement
accuracy
Accuracy：0.5℃Face Distance：30CM—50CM
Storage capacity
20,000 faces database and 150,000 records
External interface
USB RJ45 RS232 TTL reset switch, Wi-Fi antenna interface, Brake machine interface
Operating voltage
12 V DC ±20%
Communication
mode
Wired network, Wi-Fi, optional 4G
Type
Wall-mounted type, desktop type, vertical type for adults, vertical type for kids

Temperature Measurement and Face Recognition Machine User Manual
6
Installation mode
Wall-mounted bracket, vertical bracket, desktop bracket, gate installation
Warning:the function of measuring temperature of this product is not a medical
product, it is only used by quick checking of human body temperature! After the machine starts
up, the temperature measurement module needs to be preheated for 15 minutes before it can enter
the normal temperature test!
■Electrical Performance
Input power
110–240VAC
Output power
12 V, 5 A DC
Standby power consumption
< 0.5 W
Speaker power
8 ohm, 1 W
Rated power consumption
< 20 W
■Work Environment
Operating temperature
10°C–30°C
Operating humidity
0%–90% RH
Storage temperature
–10°C to +60°C
Storage humidity
0%–65% RH
■ Port description

Temperature Measurement and Face Recognition Machine User Manual
7
■Body Temperature Display
Normal temperature
Abnormal high temperature
Abnormal low temperature
■Application Scenarios
▶The machine is used for quick temperature reading and face recognition in schools, cinema, communities,
supermarkets, checkpoints, subway stations, customs ports, airports, stations and other places.

Temperature Measurement and Face Recognition Machine User Manual
8
■Installation Modes
Model: LKS-TM001W
Model: LKS-TM001T
Wall-mounted

Temperature Measurement and Face Recognition Machine User Manual
9
Models: LKS-TM001K (for kids); LKS-TM001A (for adults)
Notes
1. When using the product to measure temperature, the personnel should pay attention to: the forehead of the
person is dry without water, and the forehead has no hair and no clothes and hats to cover; The product
should be placed in an indoor environment with no wind or bright sunlight, and away from air conditioning,
electric heating and other temperature control equipment.
2. The equipment shall not be placed in a humid environment. Outdoor equipment shall be equipped with a
damp proof cover. Wet use environment will accelerate the rapid aging of electronic components, thus
reducing the service life of the product, resulting in damage of components with damp
Desktop
Vertical

Temperature Measurement and Face Recognition Machine User Manual
10
3. Do not place the equipment under the environment of strong ultraviolet ray and direct sunlight. When the
temperature is higher than 30℃, ultraviolet and high temperature irradiation of the screen will accelerate
the deflection of liquid crystal molecules, the screen will accelerate the aging, when the outdoor
temperature is higher than 30℃to move to the indoor or sunshade treatment
4. When the air temperature is lower than 10°C, the screen may not work properly due to the deflection of
liquid crystal molecules. It is recommended not to use this machine below 10°C.
The recommended ambient temperature of this product is 10-30 ℃and the humidity is
10%-80%.
Part 3: Product Installation Operation Instruction
Installation Guide
Introduction
Temperature measurement, face recognition all-in-one machine is a convenient and fast system for
face recognition + human body temperature measurement, with small size, easy to put, simple
installation, fast detection speed and other characteristics.
Attention ：This installation guide is to guide the installation according to the standard
installation order and method. If you have any questions or problems during the installation process,
please contact lean technician. TEL：[phone]
Installation Step
Please evaluate and check the following environmental factors before installing the temperature
measuring face recognition all-in-one machine：
Attention
▶Security:As the overall structure of the temperature measurement face recognition machine is
sheet metal, the connection between the bracket and the base must be firmly installed.
▶Location Reasonable: The installation location should be selected reasonably. The vertical
temperature measuring all-in-one machine is only suitable for indoor environment.
▶Power Supply: The input voltage of the equipment in normal operation is "single-phase
100v-240v ac voltage"; The power adapter 12V power supply line and network line are connected by the
bottom of the machine bracket.
Machine Installation Instructions
Schematic Diagram of Machine Structure

Temperature Measurement and Face Recognition Machine User Manual
11
Tool：
Cross Screwdriver
Electrical insulation tape
Accessories：
Temperature measurement, face recognition all-in-one machine host
Body sheet metal bracket
Power line
12V power adapter
Cable
All-in-one machine tool kit
Base
Remote Thermometer
The Host of the Machine
Body Sheet Metal Bracket
Decorate Light Bar

Temperature Measurement and Face Recognition Machine User Manual
12
The method of connecting the host and the support bar of the temperature measuring, face
recognition all-in-one machine
1. ZRemove the top cover plate of the main sheet metal bracket and install the reserved USB extension cable
head and DC power cord head inside the bracket.
2. Remove the waterproof washer, corrugated elastic pad and nut from the temperature measuring all-in-one
machine host and insert them into the top cover of sheet metal bracket. Then restore the waterproof washer,
corrugated elastic pad and nut in order and tighten the nut.
3. Connect the USB cable, network cable and DC power cord, and fasten the connector with electrical tape to
prevent it from falling off.

Temperature Measurement and Face Recognition Machine User Manual
13
4. Tie the connected wire into the body of the sheet metal bracket, close the body of the sheet metal top cover plate
lock screw.
5. Insert 12V DC power cord and network cable equipment from the bottom of the temperature measuring
all-in-one machine to start the machine.
f there is any problem that cannot be solved by the temperature measuring face recognition
all-in-one machine, please contact the operation and maintenance manufacturer
TEL：[phone]
Part 4: Functions and Operations on the Client Interface
■ Introduction to the main interface

Temperature Measurement and Face Recognition Machine User Manual
14
(1) Interface:
The main interface provides all the measurements and most useful information.
(2) Interface elements
①Temperature measurement icon: orange when temperature measurement is enabled, and gray when temperature
measurement is disabled.
②Mask detection icon: blue when mask detection is enabled, and gray when mask detection is disabled.
③Helmet detection icon: orange when helmet detection is enabled, and gray when helmet detection is disabled.
④Time: regional network time set by the system.
⑤Company name (can be set on the setting interface.)
⑥Network mode and IP address
⑦Number of registered users and maximum number of faces (Click 10 times quickly within 2 seconds to display
the user list interface.)
⑧Device number
⑨App version and name
⑩After the recognition is successful, the registered picture is displayed (Click 10 times quickly within 2 seconds
to display the setting interface.)
(3) Exit the main interface: Connect a mouse and right-click the mouse 10 times to exit the main interface and
display the Android desktop.

Temperature Measurement and Face Recognition Machine User Manual
15
■Login Interface
(1) Interface:
This is the login interface. Login is required for displaying the setting and user list interface. The initial password
is 123. After successful login, you can change the password on the setting interface.
(2) Interface elements:
The login procedure is not repeated here. If you forget your login password, restore the initial password 123 by
clicking ①5 times quickly within 2 seconds and then clicking ②5 times quickly within 2 seconds.
■ Setting Interface

Temperature Measurement and Face Recognition Machine User Manual
16
(1) Interface:
The interface is the setting interface, setting server IP, company address and a series of checks
⑵Introduction to the interface elements:
1. Login password
2. Company name. Used to display 3 server IP addresses on the main interface
3. Voice prompt setting. This setting has text to grasp the voice and prompt ring tone 2, default all, can not be
selected
4. Access control. Face, safety helmet, mask, temperature 4 options, default all options, at least 1 option
5. Access control time. Relay control time, that is, the opening time. The customer can choose to enter the control
time
6. Relay mode: normally open, normally closed 2 choose 1. This is the hardware option, the sales need and the
customer to determine the type of need.
(often open: in the case of power on the door, face machine power off, access control is effective can not enter at
will. Normally closed: in the case of power on the door, the face machine power off, access control invalid can
enter and exit at will.）
7. Software initialization (Use this function with caution! Before the device is delivered, all parameters
are set and the platform is bound. After initialization, all settings of the app are cleared, and the platform
cannot be connected. Use this function only when you build and bind your own platform.)

Temperature Measurement and Face Recognition Machine User Manual
17
8. Whether to turn on face detection
9. Whether to upload a face photo
10. Whether to detect a helmet
11. Whether to detect a mask
12. Whether to measure body temperature
13. Temperature unit. Select Fahrenheit or Celsius.
14. Set the high temperature alarm threshold
15. Temperature calibration (Use this function with caution! Each hardware of temperature measurement
modules has their hardware characteristics. Therefore, we cannot ensure that all the modules have consistent
measurement results. The device is calibrated before delivery. Do not use this function unless your measurement
results are obviously inconsistent.)
Note: For functions 3 and 8, prompts and instructions are provided on the code.
■User List Interface
(1) Interface:
This interface provides a list of registered users, as well as the user details.

Temperature Measurement and Face Recognition Machine User Manual
18
Part 5: Service Platform Operations
■Overview
This platform is a cloud platform system in the SaaS management architecture. It allows multiple customers to
use and manage their data and functions independently in the same system without interfering with each other.
1.1. Terminology
Operator: refers to the enterprise responsible for the management of the entire cloud platform. The enterprise
has the functions of ordinary customers on the cloud platform and the rights of the super administrator for the platform.
Customer: refers to a virtual company account created by the operator for the specific enterprise on the cloud
platform after the device is purchased from the operator.
User: refers to an account that can log in to the web management system of the cloud platform for related
operations; each user belongs to a specific customer; all accounts are unique on the cloud platform.
Super administrator: the first built-in user who can log in to the cloud platform after the cloud platform is
established. This user is the operator's customer by default, and has the highest management rights of the entire system.
System administrator: When a virtual company account is created for each customer, a system administrator
account and password will be requested. If the account passes the uniqueness verification on the platform, it becomes
the customer's system administrator.
Staff: the staff to be included in customer management, and face recognition and body temperature detection;
staff and users are two completely independent concepts.
1.2. System Requirements
The system uses Google browser. If other browsers are used, some features may not be displayed and used properly.
1.3. Multilingual Support
The platform supports Chinese and English by default. It supports multiple languages for extended design, but the
support for other languages requires communication with business personnel.
In principle, multi-language support is charged. The customer provides the local language translated from
Chinese, and our technical staff integrates it into the platform to support localization.
Local languages written from right to left are not supported.
1.4. System Login
Enter http://Server IP address:8080/cwaac/login.html in the browser address bar. On the login interface, enter
the user name and password to log in.
You can select the supported local language on the right of the login interface.

Temperature Measurement and Face Recognition Machine User Manual
19
1.5. Description of the Main Interface
The main interface consists of three parts: comprehensive information area on the top, menu bar area on the left,
and the main operation area on the right.
Comprehensive information area:
Left 1: cloud platform system name
Left 2: current login customer name
Right 1: current login user
Right 2: link for changing the password of the current user
Right 3: link for exiting the login link
Right 4: platform software version number
Menu area: The menu is a two-level menu. The level-2 menus are function menus. The operator user can view
SaaS management menus and customer menus, while the customer user can only view the customer menus.

Temperature Measurement and Face Recognition Machine User Manual
20
Main operation area: allows you to complete specific operations.
1.6. Device Access Process
To connect a device to the cloud platform, perform three steps: registration > activation > addition.
Registration: Register the terminal in the system by using the terminal's hardware code and hardware code type.
The hardware code is shown on the following interface of the terminal.
Activation: Add the registered device. On the terminal, set the access IP address and port number of the cloud
platform, and click OK to activate the device. After activation, you can see a 6-digit terminal number on the terminal,
as shown the following figure.
Add: The activated terminal belongs to the operator's customer on the server by default. You need to add the
terminal to a specific customer on the server so that the customer can see and manage the terminal under their account.
1.7. Rights Management Model
This system provides three-level management rights. The three levels include the functions, roles, and users.
Functions: operations in the system, mainly involving the viewing (list and specific information) and editing
(addition, deletion, modification, and check).
Roles: the type of user created in the system who can perform a certain type of operation. Each role has an
editable range of functions. A role can be assigned to a user, and the user automatically has all the functions of the role.
User: an account that can log in to the system and perform corresponding operations. Each user can have only
one role.
■SaaS Management Functions
SaaS management functions are provided for the SaaS operator, not for the customer. The SaaS management