Leclerc Basinette User manual
Basinette
Instruction Manual
Read all instructions carefully before
assembly and the use of this product.
click
unclick
！WARNING
IMPORTANT: Read the instructions carefully before use and keep for future reference.
WARNING: This product is only suitable for a child who can not sit up unaided.
WARNING: Only use on a firm, horizontal lever and dry surface.
WARNING: Do not let other children play unattended near the product.
WARNING: Do not use it, if any part of is broken, torn or missing.
Only use the replacement parts supplier or approved by the manufacturer.
Do not use the product near heat sources, open flames or dangerous objects that are within reach
of the child.
Do not add any mattresses are not approved by the manufacturer.
Before carrying and lifting, make sure that the handle is in the correct position of use.
It could be dangerous to leave your child unattended.
Assembly and preparation of the item must be carried out by adults.
Before use, make sure that all of the attachment mechanisms are connected properly.
Do not insert the fingers into the mechanisms.
It could be dangerous to use accessories which are not approved by the manufacturer.
This product is designed for the children from birth up to a weight of 9 kg.
Take care when adjusting the mechanisms (handle, backrest) with the child present.
Regularly check the handle (or the handles) and the bottom of the carriage to make sure that
there are no signs of breakage or damage.
Instructions for use
1.OPENING THE CARRYCOT: Turn the handle of carrycot upwards.
2.To open and lock the base in the open position, move the sliders from the centre of the base
towards the two extremities (fig. a) until they click into place (fig. b).
3.HOOD: On the opening zip, a mesh insert allows the parent to monitor the baby (fig. a).
4.COVER: Place the cover over the carrycot; fasten the zip around.
5.HANDLE: The handle is only locked in the vertical position (fig. a). To lower the handle, press the
two side buttons simultaneously and push it downwards (fig. b). The handle is useful to carry the
SPAZIO and fasten it onto the chassis (fig. c).
6.ROCKING POSITION: The base of the carrycot has a shape that allows you to rock your child when
placed on the flat surface.
7.SLEEPING POSITION: To turn the carrycot into a non-rocking cradle, extract the 4 feet positioned
under the base.
8.ADJUSTING THE BACKREST: The backrest can be adjustable into 3 positions. Just open act under
the backrest.
9.CLOSING THE CARRYCOT: The carrycot can be closed to reduce its bulk. Press and push the tabs
of the sliders beneath the base of the carrycot (fig. a) and move them simultaneously towards the
centre of the base (fig. b).
10.Rotate the handle downwards, pressing the two side buttons simultaneously.
Spazio System
11.The carrycot can be fixed on the stroller or chassis.
To fasten the carrycot, position it on the chassis and press down with both hands until it clicks.
Always enable the brake on the chassis before fastening and unfastening the carry cot.
Ensure the carrycot is properly fastened.
To release it, pull the lever out (arrow _a) and lift the carrycot.
Removing the padding
12. To remove the padding of the carrycot:
！WARNING
IMPORTANT: Read the instructions carefully before use and keep for future reference.
WARNING: This product is only suitable for a child who can not sit up unaided.
WARNING: Only use on a firm, horizontal lever and dry surface.
WARNING: Do not let other children play unattended near the product.
WARNING: Do not use it, if any part of is broken, torn or missing.
Only use the replacement parts supplier or approved by the manufacturer.
Do not use the product near heat sources, open flames or dangerous objects that are within reach
of the child.
Do not add any mattresses are not approved by the manufacturer.
Before carrying and lifting, make sure that the handle is in the correct position of use.
It could be dangerous to leave your child unattended.
Assembly and preparation of the item must be carried out by adults.
Before use, make sure that all of the attachment mechanisms are connected properly.
Do not insert the fingers into the mechanisms.
It could be dangerous to use accessories which are not approved by the manufacturer.
This product is designed for the children from birth up to a weight of 9 kg.
Take care when adjusting the mechanisms (handle, backrest) with the child present.
Regularly check the handle (or the handles) and the bottom of the carriage to make sure that
there are no signs of breakage or damage.
Instructions for use
1.OPENING THE CARRYCOT: Turn the handle of carrycot upwards.
2.To open and lock the base in the open position, move the sliders from the centre of the base
towards the two extremities (fig. a) until they click into place (fig. b).
3.HOOD: On the opening zip, a mesh insert allows the parent to monitor the baby (fig. a).
4.COVER: Place the cover over the carrycot; fasten the zip around.
5.HANDLE: The handle is only locked in the vertical position (fig. a). To lower the handle, press the
two side buttons simultaneously and push it downwards (fig. b). The handle is useful to carry the
SPAZIO and fasten it onto the chassis (fig. c).
6.ROCKING POSITION: The base of the carrycot has a shape that allows you to rock your child when
placed on the flat surface.
7.SLEEPING POSITION: To turn the carrycot into a non-rocking cradle, extract the 4 feet positioned
under the base.
8.ADJUSTING THE BACKREST: The backrest can be adjustable into 3 positions. Just open act under
the backrest.
9.CLOSING THE CARRYCOT: The carrycot can be closed to reduce its bulk. Press and push the tabs
of the sliders beneath the base of the carrycot (fig. a) and move them simultaneously towards the
centre of the base (fig. b).
10.Rotate the handle downwards, pressing the two side buttons simultaneously.
Spazio System
11.The carrycot can be fixed on the stroller or chassis.
To fasten the carrycot, position it on the chassis and press down with both hands until it clicks.
Always enable the brake on the chassis before fastening and unfastening the carry cot.
Ensure the carrycot is properly fastened.
To release it, pull the lever out (arrow _a) and lift the carrycot.
Removing the padding
12. To remove the padding of the carrycot:
EN
EN
- Release the cover and remove it
- Inside the carrycot, open the zip all around (fig.a) and open the two zips as shown in figure b
and c, in order to remove the padding.
Padding cleaning instructions
Brush the fabric parts to remove dust and hand wash at a maximum temperature of 30° without
wringing.
Do not use chlorine bleach.
Do not iron.
Do not dry clean
Do not remove stains with solvents and do not tumble dry.
There are five symbols at the end of the manual.
Product cleaning
This product requires a small amount of maintenance.
Cleaning and maintenance must only be carried out by adults.
Keep all moving parts clean and if necessary lubricate them with light oil.
Clean the plastic parts periodically with a damp cloth. Do not use solvents or similar substances.
Brush the fabric parts to remove dust.
Protect the product from atmospheric agents: humidity, rain or snow. Extended exposure to
sunshine can cause color changes in many materials.
Store the product in a dry environment.
Accessories
BAG: Satchel with pad for changing baby’s diaper. Fasten to the chassis.
EN
Instagam:Leclerc Strollers
Website:www.magicfold.com
EN1888-2018
LSC Europe B.V.
Westplein 55, 3016BM Rotterdam, The Netherlands
Phone: +31(0)10-3027086 - support@leclercbaby.com
IG @leclercbaby | FB facebook.com/leclercbaby
Table of contents
Other Leclerc Stroller manuals
