Lec+ NuWave User manual

NuWave™ Lounger
USER MANUAL
1-400-0105 • Rev C • 08/29/23
© Living Earth Crafts 2022, All Rights Reserved
*chairs shown with oponal accessories and/or nishes
NuWave
NuWave S

© Copyright 2022
Living Earth Cras®
All rights reserved. is document or any
portion thereof may not be reproduced
in any way, including photocopying or
translation to another language without
the prior written permission from Living
Earth Cras.
Living Earth Cras® is a registered trade-
mark of Earthlite, LLC.
Legal Notice
e information provided in this document is intended
for informational purposes only and is subject to change
without notice. e information provided in this docu-
ment should not be construed as a commitment by
Living Earth Cras®.
Living Earth Cras® assumes no responsibility for the
accuracy or suitability of the information contained in
this document. is document may contain technical
inaccuracies or errors. Living Earth Cras® makes no
expressed or implied warranties of any kind concerning
the information contained in this document, including,
but not limited to, the implied warranties of merchant-
ability and tness for purpose.
Living Earth Cras® shall not be liable for incidental or
consequential damages in connection with or arising out
of the product, performance, or use of this document
and the information and material it describes.
Introduction
Congratulaons on your purchase of the NuWave™ Lounger, featuring sleek, zero gravity design
with plush cushioning for the ulmate in style and comfort. With opons like TheraSound
Acousc Resonance Therapy and lighng, you can customize your loungers to be the perfect t
for your clients.
NuWave™ Loungers are designed for licensed therapists and are intended to be used in a
professional spa, massage studio, or similar commercial environment. While no special training
is needed to operate, for safety reasons it is important that the instrucons contained in this
manual are reviewed in detail before the rst use. This manual should be read in its enrety by
each professional who will be using the lounger to ensure the safety of both operator and client.
This manual should be saved for future reference.
The NuWave™ Lounger should not be used in any other manner than described in this manual.
Please read, understand, and follow all safety warnings, labels, and instrucons. Misuse, use of
unnecessary force, or using the product for unintended or unauthorized procedures can result in
injury to operator, client, and/or equipment.
Detailed instrucons for use and maintenance can be found in this user manual. If you have
further quesons, please contact us at [phone] for US customers, or [phone] for
internaonal customers. We can also be reached via e-mail at info@livingearthcras.com
Secon 1: Safety Informaon
Safety Symbols
Warnings
Secon 2: Product Overview
Product Photos
Product Specicaons
Secon 3: Operang Instrucons
Moving Your Lounger
Basic Setup
Electrical Specicaons
TheraSound Instrucons
Mind-Sync Instrucons
Secon 5: Care & Maintenance
Care Instrucons
Troubleshoong
Warranty Informaon
Contact Us
2
2-3
4
5
6
6
6
7-8
9-11
12
13
13
Table of Contents
back cover

READ AND SAVE THESE INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS
23
IMPORTANT SAFETY INSTRUCTIONS - FOR COMMERCIAL USE ONLY
Read all instructions before using this product.
Safety Symbols
Familiarize yourself with the following
Safety & Warning symbols. They are
designed to prevent damage and injury to
you, your clients, and your new Living Earth
Crafts product.
IMPORTANT: The important safety
instructions and warnings in this manual
cannot cover all possible problems and
conditions that can occur. Use common
sense and caution when installing,
operating, or maintaining this appliance.
Indicates an imminently hazardous
situation which could result in serious or
fatal injury.
Indicates a potentially hazardous
situation which could result in serious
injury.
Indicates a potentially hazardous
situation which could result in
equipment damage and/or injury.
These warnings apply for NuWave loungers with optional electrical components:
1) Always unplug this furnishing from the electrical outlet before servicing.
2) Never use this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. Return the furnishing to a service center for examination and
repair.
3) Keep the cord away from heated surfaces.
4) Do not use outdoors.
5) Do not operate where aerosol (spray) projects are being used or where oxygen is being administered.
6) Connect this furnishing to a properly grounded outlet only. See Grounding Instructions.
RISK OF ELECTRIC SHOCK, FIRE, AND EXPLOSION
1) Never use this furnishing on an uneven surface.
2) Never use or store your table in a wet or very humid environment. Water and excessive moisture
can damage the wood cabinet and electrical components. Evidence of exposure to water or
moisture will void your warranty.
3) Never drop or insert any object into any opening.
INTERNATIONAL VERSIONS ONLY
This product is for use on a nominal 220V-240V circuit and has a
grounding plug (plug type varies by country). Make sure that the prod-
uct is connected to an outlet having the same conguration as the
plug. No adapter should be used with this product.
NORTH AMERICA ONLY
Grounded
Outlet Box
Grounded Outlet
Grounding Pin
GROUNDING INSTRUCTIONS:
POWER SUPPLY: (120V AC grounded) Electrical limitations: Do not use extension cord with this product, plug directly
into grounded outlet. This product must be grounded. If it should malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding plug. This three prong grounded plug will only t into
wall outlet one way. If the plug does not t fully in the outlet, contact a qualied electrician to install the proper outlet.
Do not change the plug in any way.
1) Use this furnishing only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
2) Do not operate this equipment unless properly trained.
3) Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled
persons.
4) Do not use this furnishing to support video equipment such as televisions or computer monitors.
To reduce the risk of burns, re, electric shock, or injury to persons:
SECTION 1: SAFETY INFORMATION SECTION 1: SAFETY INFORMATION

SECTION 2: PRODUCT OVERVIEW
*Loungers shown with oponal accessories and/or nishes. Measurements may vary due to natural material variaons.
4
Width Standard: 31” (79 cm)
Length Standard: 73” (185 cm)
Seat Height 15” (43 cm)
SECTION 2: PRODUCT OVERVIEW
Strata™
Memory Foam
Mattress Feature Standard Oponal
Strata® Memory Foam
Maress X
Neck Roll Pillow X
Maple Hardwood Cabinet X
Upholstery Comfort-Flex™ Ultraleather® or
Promessa®
TheraSound System X
Dimmable Reading Lamp X
Mind-Sync™ X*
Relaxor® X*
Included Features
Product Specications
*Measurements may vary due to natural material variaons.
5
Maple hardwood
cabinet
*Not available on NuWave S

6
Your NuWave Lounger comes completely assembled and ready to use.
Once the lounger is unpacked, follow the “Moving Your Lounger” instrucons below.
Moving Your Lounger
Your NuWave Lounger is very heavy - extreme cauon should be used to
avoid injury to yourself, others around you, and your lounger. DO NOT li
or move without using proper safety procedures/equipment.
Basic Setup Instructions
Once your NuWave Lounger is posioned for use, follow these steps:
• If applicable, plug the power cord into a grounded outlet that is properly rated.
• If applicable, arrange and secure the power cord so it will not create a tripping hazard.
Electrical Specications
Spec North America Europe/Asia
Input Voltage 120 VAC 220 VAC
Input Frequency 60 Hz 50 Hz
Consumpon - TheraSound 1A .56A
Consumpon - Lamp .5A .28A
Consumpon - MindSync 1.25A .63A
Consumpon - Relaxor 4A 2A
SECTION 4: OPERATING INSTRUCTIONS SECTION 4: OPERATING INSTRUCTIONS
7
Never force the connecon between your phone/music player and the
TheraSound Amp. The correct cable connecon is standard on most devices,
should never require forced pressure to complete.
The TheraSound Amp is the proprietary amplier used to power your SoundHearts. It has been
specially designed to work with almost any musical device, and to deliver the deep, resonang
tones and harmonies that are so benecial to a relaxing experience.
TheraSound Amp Operating Instructions (Optional)
On/O
switch
Volume/Resonance Control
The resonance knob should not have to be more than half way (11-12:00 o’clock posion) or
distoron will be a problem. The status light will turn green when the system is in distoron
and you will hear a popping sound.
Using a Phone or Player
If you want to use a phone or another player, plug in the 3.5mm male-male cable into
the headphone output of your phone and plug in the other end into the front of the amp
labeled “INPUT”.
Input from
your USB
player
Status
light
Output to
headphones
or powered
stereo
speakers
Resonance
volume
control
Start/stop
USB player
Headphone
volume
control
USB slot
Next
track
Since the TheraSound System uses magnets in the SoundHearts, people with
pacemakers or any other implanted magnecally-sensive medical device
should consult with a doctor before lying on a table with this system.
The TheraSound system has no user-serviceable parts. Never aempt to
open or repair the TheraSound System.

SECTION 4: OPERATING INSTRUCTIONS
1. Basic Troubleshoong
• Ensure that the music source’s volume is turned up and mute is not enabled.
• If you have an internal equalizer on your musical device, ensure that the balance is set equally
between Le and Right,
• Ensure that your mp3 player or music source is plugged into the “INPUT” socket on the front
of the TheraSound Amp (see secon, gure image)
2. I can’t feel the resonaon
• Adjust the le knob on the le side of the Amp to control the vibraon levels of the
SoundHearts.
• Check to see if the blue light is on (front of amp).
• If you have the 3.5mm cable plugged in, you will not hear anything from the USB. Unplug the
cable to hear the music on the USB.
3. I can only feel the resonaon on one side of the lounger
• Check that the balance of your musical device is balanced equally between le and right, and
forward and backward if applicable
4. I can’t hear anything out of my external speakers or headphones
• Adjust the right knob on the right of the Amp to control headphone or external speaker
volume
• Adjust the volume of your external speakers
• Check that the balance of your musical device is balanced equally between le and right.
5. I can hear music through my headphones or speakers, but the vibraon from the lounger is
very weak or distorted
• The bonus music that came with your lounger was specially created to resonate with the
SoundHearts within the plaorm. Due to dierent levels of studio producon and recording
quality, some music that may “sound” good, may not “resonate” as well out of the SoundHearts.
But don’t be dismayed, you may nd that music that you may not normally “listen” to, feels
unbelievable when coming through the SoundHearts.
• Check that the balance of your musical device is balanced equally between le and right, and
forward and backward if applicable
• Adjust the resonance with the le knob on the So Sound Amp
• Try using a non MP3 format. Try using the standard to all Cds (.wav) or a non-compressed
audio format.
• Make sure the output from your player is on high (about 8 out of 10) but not so much as to
distort the sound.
TheraSound Amp - Troubleshooting
Warranty
SoundHearts and Amp – 1 (One) Year Limited
The TheraSound components are not user-serviceable. Opening either the TheraSound Amp or
any of the TheraSound components voids all warranes
8
SECTION 4: OPERATING INSTRUCTIONS
Mind-Sync Initial Setup
1. Put together tablet stand.
2. Locate power cable under the right side of the seat.
3. Connect the cables to the tablet (per diagram).
4. Plug headphones into jack on side of chair.
5. Plug in power cable of chair into 110V outlet.
Mind-Sync Operating Instructions (Optional)
The Mind-Sync system deploys binaural beats, gamma sound waves, and acousc resonance
therapy. Full spectrum sound waves resonate through four channel high delity transducers
mounted strategically in the chair frame to achieve unprecedented levels of stress reducon
and cellular level harmonic synchronizaon.
Sciencally proven Vibro-Acousc Therapy reduces stress and promotes relaxaon – harmonic
resonant waves are directed along the Vagus nerve line, which links to the para-sympathec
control system of the heart, lungs, and digesve tract. Numerous medical studies have proven
the eecveness of this stress reducon treatment.
9

SECTION 4: OPERATING INSTRUCTIONS
Daily Use Instructions
NOTE: Ensure headphones are charged for daily use. Headphones MUST be plugged in
and turned on to operate Mind-Sync™. Refer to headphones user manual for charging
instrucons.
1. Plug headphones into the headphone jack, located on the right side of the chair, below
the armrest.
2. Turn on the tablet by holding down the power buon (top le buon on tablet) unl
a blue light illuminates, and wait 20-30 seconds for the Mind-Sync™ system to load.
When the Mind-Sync™ home screen appears, the system is ready for use.
3. Use the touch screen to choose from the 6 Mind-Sync™ journeys:
NOTE: Once the journey starts by pushing “PLAY”, there is no way to pause, rewind, or fast-
forward the program. To stop the program, press the “HOME” buon in the boom right
corner of the tablet screen.
• Stress Reducon
• Emoonal Reset - 25 min length
Release energy that no long serves you
• Soul Soak - 20 min length
Surrender yourself to the depths of relaxaon
• Enhanced Sleep
• Neo-Nap - 20 min length
The modern nap for bustling professionals
• Delta Dreams - 60 min length
Succumb to the deepest level of dreams through this guided venture inward
• Augmented Meditaon
• Nature’s Journey - 25 min length
Let the wilderness of your heart nd you through these soothing sounds of nature
• Stress Release - 25 min length
Free yourself from tension through leng go
4. Adjust volume by using the knob next to the headphone jack, located on the right side
of the chair, below the armrest.
5. Once you have nished listening to the journey, press the home buon to return to
the home screen. This can be done at any me.
SECTION 4: OPERATING INSTRUCTIONS
Mind-Sync™ Touch Screen Control
The below image shows the menu on the Mind-Sync™ touch screen control. See next page for
descripons of each program and instrucons for daily use.
10 11

SECTION 5: CARE & MAINTENANCE
With proper maintenance, your Wave Lounger is designed to give you years of trouble-free
operaon. To ensure your lounger will connue to funcon properly and keep its appearance,
we recommend the following.
Category Care Recommendation
Upholstery
Remove day-to-day dirt and smudges with a mild soap and water soluon.
For tough stains and to disinfect, use a (100 to 1) water to bleach soluon.
Spray a damp cloth with the soluon to clean.
Aer each cleaning, gently wipe the upholstery with a damp cloth and clean
water, then allow upholstery to air dry before using or storing.
For more dicult stains, please contact your dealer or please call us directly
for guidance. For best results, use only the products suggested above.
Wood To maintain the wood nish and retouch scratches, use a high quality
furniture wax.
Electronics An-stac electronic aerosol dusters can be used to keep the surfaces of
electronic components, power cables, and plugs free of dust.
Cleaning & Ongoing Maintenance
DO NOT USE acetone, “Armor All” type cleaners, citrus-based cleaners,
or industrial cleaners. These can seriously damage the upholstery. Such
damage would not be covered under warranty.
RISK OF ELECTRIC SHOCK
Always unplug this furnishing from the electrical outlet before cleaning.
12
SECTION 5: CARE & MAINTENANCE
This helpful troubleshoong guide will provide you with informaon about how to recognize a
problem with your lounger, determine possible causes, and nd a soluon.
In the event your specic situaon is not covered in this guide, please contact Living Earth Cras
so our technical support department can assist you. Beyond the troubleshoong guide below, do
not aempt to repair the lounger yourself. This can void your warranty.
Unauthorized service will not be covered. Please be sure to contact Living Earth Cras Customer
Service rst at [phone], [phone] Int’l.
Troubleshooting
Issue Solution
Electrical
components not
working
1. Ensure the lounger is plugged in.
2. If using a dimmer switch, ensure it is turned to full power.
3. Ensure the outlet in your room is receiving power. This can be done
by plugging in a small appliance and turning it on.
4. Check the fuse or circuit breaker for blown fuse or tripped breaker.
13
Warranty Information
Living Earth Cras (LEC) oers an industry best one (1) year warranty, worldwide, on all chairs
and accessories. Foam and upholstery covering are warranted for three (3) years. Accessories
and opons are warranted for one (1) year, unless otherwise noted. LEC may repair or replace
defecve components at our discreon. LEC will return the warranted product, standard
shipping pre-paid, to customers in the connental US. Internaonal customers are responsible
for any applicable dues and taxes, as well as all shipping charges inbound and outbound.
Normal wear and tear, and costs associated with maintenance procedures, and damage caused
by accident, misuse, improper maintenance, harsh operang environments or neglect (which
includes tears in the upholstery and damage caused by harsh chemical-based cleaners) are
not covered under this warranty. All warranes are limited to repair or replacement, at LEC’s
discreon, unless otherwise stated.

Contact Us
Living Earth Crafts
990 Joshua Way
Vista, CA. 92081
[phone]
[phone] Int’l
[phone] fax
[email protected]
Hours of operation:
Monday - Friday
8:00 a.m. to 5 p.m. PST
Saturday - Sunday
Closed
Visit us online at: livingearthcrafts.com
Join us on
Facebook
Follow us on
Twitter
Connect with us
on Linked In
Follow us on
Instagram