Led world Wifi-103 User manual

This product is intended to be installed and serviced by a qualied licensed electrician. Install in

accordance with the National Electric Code, and local regulations.

Only power with a regulated (listed) constant voltage Class 2 power supply (12-24V DC).

Ensure applicable wire is installed between driver, xture, and any controls in between. When choosing

wire, factor in voltage drop, amperage rating and type (in-wall rated, wet location rated, etc.).

Inadequate wire installation could overheat wires and cause re.

This product is rated for indoor installation and only for dry locations.

Do not modify this product beyond the instructions in this guide or the warranty will be voided.

Wiring diagrams in this installation guide for basic installations. Please carefully review your installation

before proceeding

Safety & Warnings

Before you begin, read all warnings and installation instructions.

1. Product Parameter:

WiFi-103 is a versatile RGB color control lighting system.

Through WiFi function and mobile devices, the wi-103

can control various types of RGB LED lighting products VIA

iOS or Android.

WiFi-103 lighting control system integrates four functional

controls including; dimming, color temperature adjusting,

and RGB controller. The WiFi-103 can work with the

optional wireless T3 controller and T3-CV Receiving

controller.

Communication Standard

Input Voltage

Max Current Load

Max Output Power

Product Size

Weight(G.W.)

2.4 GHz Wi-Fi, 802.11 b/g/n Protocol

DC12V~DC24V (Use only with Class 2 listed regulated power supply)

4A x 3CH Max 12A

144W/288W (12V/24V)

L128 × W73 × H45 mm

290g

WiFi-103 control system supports direct connection or by router:

In directly connection, mobile phone, IOS and Android can directly control the WiFi-103 controller + T3-CV

wireless control, without any third party of network equipment. Optional remote (T3) is available, if software

is not used.

WiFi Control Distance

Working Temperature

Package Size

100m

-20°C ~ 40°C

WiFi-103 Controller

L135 x W80 x H50mm

WiFi-103 WiFi Lighting Control System

1LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA

Copyright © 2015 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

RGB Color Change Mode 32 xed modes, 8 DIY modes

Scene Mode 9 RGB modes, 3 CT (Color Temperature) modes

WiFi-103 Wi-Controller

2. Conguration Diagram

www.ledworldlighting.com

Working Frequency

Input Voltage

Max Current Load

Max Output Power

Product Size

2.4GHz

DC5V~DC24V (Use only with Class 2 listed regulated power supply)

6A x 3CH Max 18A

90W/216W/432W (5V/12V/24V)

L 178 x W 48 x H 33 mm

T3-CV Receiver

3. Controller Operating Instructions

ANTENNA installation instruction

1). Install / Uninstall ANTENNA

Rotate Antenna clockwise to install. To uninstall rotate

Antenna anti-clockwise

2). Light Indicator Instructions

ŸRUN : It ashes quickly about 25s during the electric

initialization. Flashes once per second after

initialization

ŸLINK: It keeps on when the mobile device

connected with WiFi controller, and turns off when

disconnected

T3 Remote Controller

Wireless Frequency

Input Voltage

Battery Capacity

Remote Distance

2.4GHz

DC5V built-in Lithium Battery

≤30mA

1000mAh

30m

Current

Standby Time

Product Size

Weight(G.W.)

≤6 months

L 145 × W 55 × H 22 mm

200g

2LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA

Power input/LED output

RUN

RX/TX

LINK

EXT KE YSSIDMATCH SCENE

SSID code switch

Indicator Learning ID scene

Manufacturer

interface

127.6mm

44.5mm

73mm

RUN

RX/TX

LINK

EXT KEYSS IDMATCH FUN

Copyright © 2015 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

WiFi-103 Wi-Controller

4. ios/Android application instructions:

1). Download Application:

www.ledworldlighting.com

Channel Color

3). SSID Number Setting

Use code switch to set the controller's SSID Number.

WiFi-103-SSID-X, X is the code switch with numerical

value (from 0 to F). Which means our product could set

16 isolated LAN in the same area. The controller will re-

enter initialization status once the code switch

changes. RUN LED indicator light will ash quickly

about 25 seconds. Search with Mobile device and

connect WiFi again after Initialization nished.

4). MATCH Key and SCENE Key

Short press SCENE to the user-dened

scene modes sequentially, Scene mode

will cycle through scenes 1 to 9, then cycle

back from scenes 9 to 1.

Restore factory settings/Delete password

Long press MATCH key and SCENE key

simultaneously more than 2 seconds, the

m a c h i n e w i l l b a c k t o t h e d e f a u l t

parameter, including the parameters of

changing modes and network parameters.

WiFi-103 controllers will be restored and connection password will be erased to blank..

scan to download android app

scan to download ios app

2). How to operate the Application:

A). Network connection setting :

WiFi-103 support 2 connection modes: Directly

connection as router or connect by additional router.

ŸConnecting WiFi-103 controller as a router

Go to mobile device's WiFi setting, Search the

available WiFi Network. From the list select WiFi

Network, appended with SSID-Number.(As Legend-1),

(no password is set by default).

IOS WiFi connectionAndroid WiFi connection

(Legend-1)

3LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA

ŸRX/TX: The indicator light turns on when the controller receives or transmits the WiFi data. Turns off

in idle time

5

4

6

3

7

2

8

1

9

0

A

F

B

E

C

D

RUN

RX/TX

LINK

EXT KEY SSI DMATCHSCENE

RGB scene interface CT scene interface

MATCH

SCENE

RUN

RX/TX

LINK

EXT KEYSSIDMATCHSCENE

Scene1 Scene2 Scene3

Scene4 Scene5 Scene6

Scene7 Scene8 Scene9

G255255 255

B50

R

Play

DIYScene Mode Device

Long press scene icons to Exchange pictures

WWW 10050

Scene1 Scene2 Scene3

50

Save

12:34 PM 100% 12:34 PM 100%

WLAN settings

WLAN

Connect to WiFi-103-SSID-0

Network notification

Auto Connect

WiFi-103-SSID-0

TP-008

ACW1F

Notify me when an open network is

available

set the way of network’s connection

Connected

Remembered, secured with WPA/

WPA2 PSK

Remembered

WLAN networks

16:07 14:17 PM

Wi-Fi

Settings

Wi-Fi

Other...

Ask t o jin Networks

Known networks will be joined automatically.

if no known networks are available, you will

have to manually select a network.

CHOOSE A NETWORK...

WiFi-103-SSID-0

WiFi-103-SSID-1

100%

Copyright © 2015 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

www.ledworldlighting.com

ŸConnect WiFi-103 with a additional router:

a). Connect to the WiFi-103 controller, as same procedure as (A)

b). Click WiFi-103 application icon to start the app. The app will search and list the working WiFi controller

automatically

WiFi-103 Wi-Controller

c). Click Network key to enter Network interface(as legend-3-1). Turn ON connect to existing LAN option

and app will search the available WiFi SSID list. Choose the available router to connect (Note : Do not

choose WiFi-103 controller)(as legend-3-2 )

Repeat the a-b-c steps if you are connecting multiple WiFi-103 controller to same wireless router.

d). Exit WiFi-103 application, go to mobile wireless network setting, choose the wireless router to connect.

Start WiFi-103 application again, device will list interface as legend-2-2. Complete the same steps to

connect to the additional router.

(Legend 3-1)

Network interface

(Legend 3-2)

Note: In this connection mode, to avoid the mobile device automatically connect to WiFi-103 after

the setting has completed, please click “workable WiFi-103". On dialog box click "Forget this network"

or "Cancel save".

Cancel saved WiFi-103 connection information

4LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA

Version:WiFi-103.0.15

Network

WiFi-103- 02SSID-

32:AA:3C:7E:B4:DA

Disconnected

Device List

WiFi-103-SSID-01

32:AA:3C:7E:B4:DA

Network

Driver

Connect to WiFi WiFi-103...

Driver

RGB

DIM

Version:WiFi-103.0.15

Network

WiFi-103- 02SSID-

32:AA:3C:7E:B4:DA

Connect to TP-LINK1

Device List

WiFi-103-SSID-01

32:AA:3C:7E:B4:DA

Network

Driver

Connect to TP-LINK1

Driver

RGB

DIM

Delete WiFi-103 controller from list

RGB Driver mode

Disconnected WiFi-103 controller

Network interface

RGB/CT/DIM Driver setting

Change the background interface

Connected additional router

Available WiFi-103

14:17 PM 100%

Connect with additional router

WiFi-103 connected as a router

Connected to WiFi-103

Manual searching button for WiFi-103 controller

Network

Back

User setting

Wireless mode

Connect to existing LAN

Change SSID and password

Network

Back

Available wireless LAN networks

TP-LINK1

WiFi-103-SSID-0

WiFi103SSID1- - -

User setting

Wireless mode

Connect to existing LAN

Change SSID and password

WiFi-103-SSID-2

WiFi-103-SSID-3

WiFi-103-SSID-4

12:34 PM 100% 12:34 PM 100%

WLAN settings

WLAN

Connect to WiFi-103-SSID-0

Network notification

Auto Connect

WiFi-103-SSID-0

TP-008

ACW1F

Notify me when an open network is

available

set the way of network’s connection

Connected

Remembered, secured with WPA/

WPA2 PSK

Remembered

WLAN networks

16:07

WiFi-103-SSID-0

Cancel Forget Disconnect

Status

Connected

Signal strength

Excellent

Link speed

65Mbps

Security

Open

IP address

10.10.100.103

14:17 PM

WiFi-103-SSID-0

Wi-Fi

Forget t his Netnwork

IP ADDRESS

100%

DHCP BootP Static

IP Address

Subnet Mask

Router

DNS

Search Domains

10.10.100.103

255.255.255.0

10.10.100.254

Hi_ﬂying

Copyright © 2015 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

www.ledworldlighting.com WiFi-103 Wi-Controller

B). RGB, CT, DIM Driver color wheel interface

C). RGB Linear Toning Interface

Click To modify linear toning interface in the RGB mode color wheel

Click on SCENE Button on the RGB driver interface. 9 scenes available in interface to choose from. The

corresponding scene changing mode will display immediately, the mode parameters are displayed

above the screen. Click Play key to cycle through dynamic change mode.

Click SAVE Button on the interface of RGB color wheel, linear toning, and mode. Select any Scene

from 1 to 9, and click OK, the Scene name dialogue box will displayed. Scene name can be modied

from dialogue box. Click OK to save current changing mode or CANCEL to Cancel the Save

operation.

5LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA

On application front screen, Device List interface is the default one. Click Driver into the Driver selection

screen. Select the RGB/CT/DIM drive and return to the Device List interface. Click the color palette into

the color palette interface, touch the color wheel to change and control the color, CT, brightness,

saturation (RGB mode only) which connected to the controller, drag the brightness bar to adjust the

brightness of the lighting. Click the ON / OFF button to turn off or turn on the controller. Click the save

button to save scene operation.

50

GR 255 B

255 255

Save

DIYScene Mode Device

12:34 PM 100%

W255

50

RGB mode

ON/OFF

RGB Values

Brightness Slider

Selected Color

Color Wheel

Driver interface

changing mode

Linear toning Interface

Scene saving

DIY interface

Select Driver

CT

RGB

DIM

Driver interface

Driver Interface

Driver WWW 10050

Scene1 Scene2 Scene3

50

Save

12:34 PM 100% 12:34 PM 100% 12:34 PM 100%

Scene interface

Dimming mode

CT mode

50

GR 197 B

161 132

Save

DIYScene Mode Device

78% 64% 52%

50

GR 197 B

161 132

Save

DIYScene Mode Device

78% 64% 52%

1 2 3

7 8 9

4 5 6

4

7

5

8

6

9

0

Done

A B C

A B C D E F

D E F

G H I

G H I J K L

J K L M N O

M N O

P Q R

P Q RS

ST U V

T U V W X Y

WX Y Z

Z

12:34 PM 100% 12:34 PM 100%

RGB Slider

Scene Save

Brightness Slider

RGB value adjuster

RGB linear toning interface RGB value adjuster

D). RGB Scene Interface

Scene1 Scene2 Scene3

Scene4 Scene5 Scene6

Scene7 Scene8 Scene9

G255255 255

B50

R

Play

DIYScene Mode Device

Long press scene icons to Exchange pictures

12:34 PM 100%

RGB Parameter Values

Long press changes the background scene

Scene modes

Dynamic scene play Button

RGB scene interface

E). RGB Scene Saving Interface

Copyright © 2015 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

www.ledworldlighting.com WiFi-103 Wi-Controller

F). RGB Mode Interface

6LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA

Device

DIYScene Mode

Save

M1.Static red

M2.Static green

M3.Static blue

M4.Static yellow

M5.Static purple

Mode

Speed 8

Brightness 100%

12:34 PM 100%

Device

DIYScene Mode

Save

M1.Static red

M2.Static green

M3.Static blue

M4.Static yellow

M5.Static purple

Mode

Speed 8

Brightness 100%

12:34 PM 100%

Saved to the Scene

Scene1 Scene2 Scene3

Scene4 Scene5 Scene6

Scene7 Scene8 Scene9

OK

Cancel

Modify the Scene name

Scene saving interface

可修改场景名称

CANCEL

CANCEL OK

OK

Scene1

Please enter the scene name

Saved to the Scene

Scene1 Scene2 Scene3

Scene4 Scene5 Scene6

Scene7 Scene8 Scene9

OK

Cancel

Changing the Scene name

Device

DIYScene Mode

Save

M1.Static red

M2.Static green

M3.Static blue

M4.Static yellow

M5.Static purple

Mode

Speed 8

Brightness 100%

12:34 PM 100%

Mode interface

Changing mode selection

Speed Slider

Brightness Slider

Play/Pause

Scene Saving

Static Red

Static Green

Static Blue

Static Yellow

RGB Skipping

7 Color Skipping

7 Colors Strobe

Red Fade out and Fade in

Static Purple

Static Cyan

Static White

Green Fade out and Fade in

White Strobe

Blue Fade out and Fade in

Mode Description

Adjustable Brightness

Adjustable Brightness/Speed

Yellow Fade out and Fade in

Mode Description

Adjustable Brightness/Speed

Purple Fade out and Fade in

Cyan Fade out and Fade in

White Fade out and Fade in

RGB Fade out and Fade in

Red Green color smooth

Red Blue color smooth

Green Blue color smooth

Red Yellow color smooth

Green Cyan color smooth

Blue Purple color smooth

Green Yellow color smooth

Blue Cyan color smooth

Red Purple color smooth

Color Changing Modes:

Blue White color smooth

Yellow/Purple/Cyan smooth

Adjustable Brightness/Speed

RGB color smooth

Full color gradual alternatively

Copyright © 2015 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

www.ledworldlighting.com WiFi-103 Wi-Controller

G). DIY Interface

The Sequence for 10 color boxes is shown above. If the type of changing mode is jump, carry out the

black, red, black, green, black, blue, black, yellow jump changing mode. That is red, green, blue,

yellow strobe changing mode. If the changing mode is gradual, carry out the black,red, black, green,

black, blue, black, yellow gradual changing mode. That is red fade out and fade in, green fade out

and fade in, blue fade out and fade in, yellow fade out and fade in.

5. WiFi Network SSID Name and Password Setting

In Device list interface, click NETWORK KEY to enter Network interface. Select Change SSID and Password

to enter User Setting interface. New SSID name and password must min 8 characters and consist of 0-9, a-z

and A-Z. Click APPLY button on the top right corner of the interface to save the changes.

7LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA

50

GR 255 B

255 255

DIYScene Mode Device

S6

S7

S5

75%

87%

62%

Jump

Gradual

D3

D4

D2

SPEEDBRTMODEDIY

Delete the color

by long pressing

Save

12:34 PM 100%

DIY interface

Jump/Gradual/Strobe switching

Mode D1-D8

Long press to delete current color

Brightness adjustment

Color select box

Play/Pause

Scene saving

Speed selection

Brightness selection

Color wheel

For example:

H). CT Interface

1). Select Scene:

Select any scene from 1 to 3 on the CT interface,

The corresponding scene changing mode will be displayed immediately. Mode parameters are as

shown on screen above.

2). Save Scene:

On CT (Color Temprature) interface, from the color wheel select color temperature. Click SAVE to

select any scene from 1 to 3, the Scene name prompt box will displayed. Click OK to save current

changing mode as Scene changing mode or click CANCEL to Cancel the Save operation.

Parameter Values

Scene

Save Scene

CT mode Scene name

Modify the Scene Name

Settings

WWW 10050

Scene1 Scene2 Scene3

50

Save

12:34 PM 100%

WWW 10050

Scene1 Scene2 Scene3

50

Save

12:34 PM 100%

可修改场景名称

CANCEL

CANCEL OK

OK

Scene1

Please enter the scene name

Copyright © 2015 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

8

www.ledworldlighting.com WiFi-103 Wi-Controller

LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA

Network

Back

User setting

Wireless mode

Connect to existing LAN

Change SSID and password

14:17 PM 100%

User Setting

SSID

Password

WiFi-103-SSID-0

Ent the new Password

Back

Restore factory settings

Change the SSID name and password Apply

14:17 PM 100%

User Setting

Accoun

Change the account name and password

SSID

Password

Ltech-WiFi-103-0

Ent the new Password

Admin

Password

Restore factory settings

Change the SSID name and password

Cancel OK

Change the SSID password

Ent the NEW Password

Ent the NEW Password again

Back

14:17 PM 100%

Device List

234

567

1

8

10 11 12

9

WiFi-103-SSID-0

32:AA:3C:7E:B4:DA

Network

Zone

Connect to WiFi-103-SSID-1

14:17 PM 100%

1.Device List interface 2.Network interface 3.Change SSID name interface 4.Change SSID password interface

Note: In direct connection of the WiFi-103 as a router, please close application after changing the

SSID name and the password, then enter the mobile device system setting to reconnect the WiFi-

103. In additional wireless router connection, it only needs to search again the WiFi-103 controller.

Note: To reset WiFi network password, simultaneously press : and more than 2s.It will delete

the WiFi network password. More details in page 3 [Restore factory settings/Delete password].

MATCH SCENE

6. Remote Control Operating Instructions

1). Learning method of T3 to WiFi-103

Learning ID:

Short press learning key MATCH on WiFi-103 (buzzer sound), then short press any key on Remote within 5

seconds until the green LED indicator or the white one ashes 3 times (Long buzzer sound) means the

controlling between remote and WiFi-103 is activated.

Cancelling ID:

long press “MATCH” on WiFi-103 over 5 seconds (until long buzzer sound) means the conection between

remote and WiFi-103 is cancelled.

2). T3 Remote Control Function Overview

T3

Color Circle

On/Off

Speed Control Buttons

Mode Control Buttons

Pause Key

Sync Indicator Light

Brightness Control Buttons

Saved Scenes

Copyright © 2015 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

www.ledworldlighting.com WiFi-103 Wi-Controller

9LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA

7. Conjunction Diagram

1). Wireless branch control connection:

Can add branch control with T3-CV

The method of synchronization for the WiFi-103 controller and T3-CV:

Learning ID: Long press the SCENE key on the WiFi-103 controller more than 2 second until the long buzzer

sound. Then short press the ID on the T3-CV until the long buzzer sound. During the synchronization RUN

light will ash quickly.

Cancelling ID: Long press the SCENE Key on the WiFi-103 controller untill long buzzer sound twice. It will

cancel the synchronization between the WIFi-103 and T3-CV.

50

G

R255 B

255 255

Save

DIY

Scene Mode Settings

12:34 PM 100%

50

G

R197B

161 132

Save

DIY

Scene Mode Settings

78% 64%52%

12:34 PM 100%

T3-CV

Router

50

GR 255 B

255 255

Save

DIYScene Mode Device

12:34 PM 100%

Mobile phone

WiFi-103

T3-CV

WiFi-103

T3-CV

Copyright © 2015 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

www.ledworldlighting.com WiFi-103 Wi-Controller

10 LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA

2). Remote Distance Reference

Router

50

GR 255 B

255 255

Save

DIYScene Mode Device

12:34 PM 100%

Mobile phone

WiFi-103

T3-CV

WiFi-103

T3-CV

3). LED Strip Connection

Warning: Input voltage must be identical to output voltage of the LED Fixture!

Exposed wire should not be more than 6- 8 mm long & solder tip (tinned). Do not allow

Wires to cross and insure all exposed wire is fully inserted into the screw terminals. Hand

tighten screw terminals. Use 22 to 16 AWG gauge wire for output terminals.

WIRE 6-8 MM (0.25-0.30")

RGB mode

CT mode

121

RGB three-in-one LED strip

+

B

R

G

+

B

R

G

121

Two- in -One color temperature led strip

121

w ww

511

331

511

331 331

121

511

331

511

331 331

+

B

R

G

+

B

R

G

WiFi-103

DIM mode

121

+

single color LED strip

121

WiFi-103

Class 2 Low Regulated Power Supply

L

N

AC Power

50/60Hz

G

N

L

t

u

p

n

I

t

u

p

t

u

O

V+

V-

Class 2 Low Regulated Power Supply

L

N

AC Power

50/60Hz

G

N

L

t

u

p

n

I

t

u

p

t

u

O

V+

V-

Class 2 Low Regulated Power Supply

L

N

AC Power

50/60Hz

G

N

L

t

u

p

n

I

t

u

p

t

u

O

V+

V-

+-

Make sure that

wires cannot

cross

+-

Make sure that

wires are screwed tight

and fully inserted

wrong correct

Copyright © 2015 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

www.ledworldlighting.com WiFi-103 Wi-Controller

11 LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA

8. Limited Warranty

We provide lifelong technical assistance with this product

A 1-year Limited factory warranty from the date of purchase. The warranty is for free repair or

replacement and covers manufacturing faults only.

Copyright © 2015 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

LED World WiFi-103 User manual

Popular Controllers manuals by other brands