Lefroy Brooks Mackintosh MK 4660 User manual

MK 4660
MACKINTOSH GRAB BAR
INSTALLATION GUIDE

DIMENSIONS
TOOLS REQUIRED
282mm centres
90mm 60mm
centres
82mm
342mm
Powered drill with Ø6mm drill bit Flat blade screwdriver Spirit level

INSTALLATION
1 Mark the hole positions on the mounting
surface. Use a spirit level to ensure the grab
bar is level.
2 Drill holes using a Ø6mm drill bit.
3 Insert the wall plugs into the holes then secure
the grab bar using the screws supplied.

CUSTOMER SUPPORT
[phone]
LEFROYBROOKS.CO.UK
Whilst every effort is made to ensure the accuracy of these, they are subject to change without notice as part
of the company’s product development process. The use of trademarks, product design and artwork is subject to
licence or agreement with LBIP Ltd. The design registrations, trademark registrations and copyrights are protected
by law and the use or reproduction outside the terms of an agreement is prohibited. The right to modify designs
and dimensions is reserved. LBIP Ltd is a member of ACID (Anti Copying in Design).
© LBIP Ltd 2016
20.065.208A / JANUARY 2016