Leica Geosystems Viva Series User manual

Leica Geosystems Ltd
Davy Avenue, Knowlhill
Milton Keynes. MK5 8LB
Technical Support Phone. [phone]
Email: [email protected]
www.leica-geosystems.co.uk
Leica Viva Quick Guide
Creating a New Leica SmartNet Server
This guide will take you through the process of creating a New Leica
Server using a domain name rather than IP Address. This domain name
will allow Leica SmartNet to automatically switch your connection
between the Main and Backup Server if required.
The benefit of this connection means that there is less downtime for
the customer in switching from the Main Server to the Backup Server
if there is a problem with the connection to the Main Server.
This approach uses the same steps for Leica Viva full and Lite modes
1. Creating and Activating the New Leica SmartNet Server

Leica Geosystems
UK Technical Support Group 2/3
Leica Viva – Creating a New Leica SmartNet Server
Leica Viva Quick Guide
▪Creating a New Leica SmartNet Server
Step Instruction Screenshots
1.1
From the Main Menu go
,,
and select .
Select Edit an existing
profile and press Next.
1.2
Highlight the SmartNet RTK
Profile that you use and press
Next.
1.3
Continue to press Next until
you come to the RTK Rover
Wizard Screen.
Select Edit a server and press
Next

Leica Geosystems
UK Technical Support Group 3/3
Leica Viva – Creating a New Leica SmartNet Server
Step Instruction Screenshots
1.4
Select the RTK Server to edit
as SmartNet Main and press
Next
1.5
Change the Address from
217.146.121.50 to the
following :
lgs.ukrtk.co.uk
Your NRTIP user id and
password should not need to be
changed.
Press Next.
1.6
Select continue with the
current mountpoint : MAX-
RTCMv3
Press Next and continue to
press Next through the wizard.
Test your connection and your
RTK profile should now be
updated to use the new access
to Leica SmartNet.