Leick Home 10084 User manual

Thank you for purchasing Leick Furniture products.
Contact customer service for comments or concerns.
Sheboygan, WI 920-451-4060 [email protected] www.leickhome.com
Assembly Instructions, #10084
Double Cross Back 24”Counter Height Stool
1/2
A: Chair Back
B: Seat Frame
C: (2) Side Stretchers L & R
D: Front Stretcher
E: (2) Front Legs
F: Seat Pad
G: Bolt 1/4＂*1-3/4＂
H: (4) Bolts 1/4＂*2-1/4＂
I: (4) Bolts 1/4＂*3-1/4＂
J: (9) Lock Washers
K: (9) Flat Washers
L: (10) Screws 8*1-1/2＂
M: Allen Wrench

Step 1
Fasten the seat frame onto chair back. Make sure the
“UP”sticker on the seat frame is upright. Do not
tighten.
Step 2
Place the chair assembly upside down on a table.
Insert two side stretchers into back leg holes. Make
sure the “L” and “R” stickers on the bottom of
stretcher should be connected to back legs. Also,
make sure the front leg sticker matches the sticker on
the seat frame before attaching two front legs.
Tighten bolts when all stretchers in place and all legs
are properly leveled.
Step 3
Fasten the stretchers and legs with screws. And fasten the seat pad through seat frame holes with screws.
2/2