Leick Home 20022 User manual

A
---1---
Allen Bolts
Flat Washers
Wood Screws
Top Assembly
BLegs
1
4
1
2
3
5
8
8
8
4
Item Parts Description Quantity Item Hardware Description Quantity
Parts List Hardware List
Sheboygan,WI 920-451-4060 [e-mail] www.leickhome.com
Thank you for purchasing Leick Furniture products.
Contact customer service for comments or concerns.
C1
41
Allen Wrench
Shelf
Assembly Instructions, #20022
Coastal Side Table with Charging Outlet
Lock Washers

---2---
Assembly Steps
Step 2Step 1
1.1
1.2 Slide the drawer out to access the four fastening blocks located
at the inside corner of Top Assembly. Fit the Shelf (D) on the notch of each Leg with the screw holes
facing toward the tips of Legs, while fastening the remaining
two Legs (B) into the upper facing side of Top Assembly (A)
with four Allen Bolts.
2.1
2.2
Tilt the Top Assembly (A), have it lay on its side with the first
two assembled Legs (B) on lower facing side.
Lay the Top Assembly (1) upside-down on a clean surface.
1.3 Fasten two Legs (B) at one end of the Top Assembly (A) with
four Allen Bolts. Do not tighten.
BB
A
Check to make sure all parts are properly aligned and tighten
all the bolts.
2.3
Step 3
Lay the assembled piece upside-down and fasten the Shelf (C) to
the Legs (B) with four Wood Screws.
5
BB
B
A
C
C
BBB
B
Step 4
Position the assembled piece upright. Unscrew the knob from
the drawer front and invert to make it face outside.
4.1
Push the drawer in.
4.2