Leick Home 10084DS/CH User manual

Thank you for purchasing Leick Furniture products.
Contact customer service for comments or concerns.
Sheboygan, WI 920-451-4060 [e-mail] www.leickhome.com
Assembly Instructions, #10084DS/CH
Double Cross Back 24” Counter Height Stool
1/2
A: Chair Back
B:Seat Frame
C:(2) Side Stretchers L & R
D:Front Stretcher
E: (2) Front Legs
F:Seat
G: Bolt 1/4＂x 1-3/4＂
H:(4) Bolts 1/4＂x 2-1/4＂
I: (4) Bolts 1/4＂x 3-1/4＂
J: (9) Lock Washers
K: (9) Flat Washers
L: (10) Screws 8 x 1-3/4 ＂
M: Allen Wrench

Step 1
Fasten the seat frame onto chair back. Make sure the
“UP” sticker on the seat frame is upright. Do not
tighten.
Step 2
Place the chair assembly upside down on a table.
Insert two side stretchers into back leg holes. Make
sure the “L” and “R” stickers on the bottom of
stretcher should be connected to back legs. Also,
make sure the front leg sticker matches the sticker on
the seat frame before attaching two front legs. Fasten
bolts when all stretchers in place and do not tighten
bolts.
Step 3
Place the chair right side up on an even surface. Now
tighten all bolts when all legs are properly leveled.
Step 4
Fasten the stretchers and legs with screws. And
fasten the seat through seat frame holes with screws.
2/2