Features
Compatible with PAL DVD (Video CD)
and NTSC DVD (Video CD)
This player can play discs recorded in either
PAL or NTSC format.
A single chip now integrates all major
DVD playback circuit functions including
MPEG2 decoder, video D/A converter,
and audio decoders.
L/R stereo analog audio outputs for
connection to existing head unit aux
inputs. Video output is composite video.
Supplied remote handles multi-function
software (multi-language
audio-track/subtitle, multi-angle,
multi-story, etc.), plus all basic functions.
Use This Product Safely
This set has been designed and
manufactured to assure personal safety.
Improper use can result in electric shock or
fire hazard. The safeguards incorporated in
this unit protect you if you observe the
following procedures for installation, use and
servicing. This unit doesn’t contain any parts
that can be repaired by the user.
When Driving
Keep the volume level low enough to be
aware of road and traffic conditions.
When Car Washing
Do not expose the product to water or
excessive moisture. This could cause
electrical shorts, fire or other damage.
When Parked
Parking in direct sunlight can produce very
high temperatures inside your vehicle. Give
the interior a chance to cool down before
starting playback.
Use the Proper Power Supply
This product is designed to operate with a 12
volt DC, negative ground battery system the
regular system in a North American car).
Protect the Disc Mechanism
Avoid inserting any foreign objects into the
slot of this player.
Failure to observe this may cause malfunction
due to the precise mechanism of this unit.
Use Authorized Service Centers
Do not attempt to disassemble or adjust this
precision product. Please refer to the Service
Center list included with this product for
service assistance.
For Installation
The unit should be installed in a horizontal
position with the front end up at a convenient
angle, but not more than 30
0
.
Protect the Monitor Mechanism
The monitor is operated
automatically. Do not draw the
monitor out or turn it upward or
downward manually. Otherwise, the
mechanism construction may be
harmed to some degree.
When you operate the monitor with
the remote handset, do not touch the
monitor by your hands. It may harm
your fingers.
