LENCO PA-260BK User manual

Model:PA-260BK
User Manual-Bluetooth party speaker with disco ball and front lighng
and 2 wireless microphones
Handleiding- Bluetooth-feestluidspreker met discobal en frontverlichng en
2 draadloze microfoons
Bedienungsanleitung- Bluetooth-Partylautsprecher mit Disco-Kugel,
Frontbeleuchtung und 2 Drahtlosmikrofone
Mode d’emploi- Enceinte Bluetooth avec boule disco, éclairage frontal et
2 microphones sans fil
Manual del usuario-Altavoz Bluetooth para fiestas con bola de discoteca e
iluminación delantera y 2 micrófonos inalámbricos

2
Index
English....................................................................................................................3
Nederlands ...........................................................................................................13
Deutsch.................................................................................................................25
Français................................................................................................................37
Español.................................................................................................................49
Version : 1.0

3
English
CAUTION:
Usage of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiaon exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1. Do not cover or block any venlaon openings. When placing the device on a shelf,
leave 5 cm (2”) free space around the whole device.
2. Install in accordance with the supplied user manual.
3. Keep the device away from heat sources such as radiators, heaters, stoves, candles
and other heat-generang products or naked flame. The device can only be used
in moderate climates. Extremely cold or warm environments should be avoided.
Working temperature between 0° and 35°C.
4. Avoid using the device near strong magnec fields.
5. Electrostac discharge can disturb normal usage of this device. If so, simply reset
and restart the device following the instrucon manual. During file transmission,
please handle with care and operate in a stac-free environment.
6. Warning! Never insert an object into the product through the vents or openings.
High voltage flows through the product and inserng an object can cause electric
shock and/or short circuit internal parts. For the same reason, do not spill water or
liquid on the product.
7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near
swimming pools.
8. The device shall not be exposed to dripping or splashing and make sure that no
objects filled with liquids, such as vases, are placed on or near the apparatus.
9. Do not use this device when condensaon may occur. When the unitis used in a
warm wet room with damp, water droplets or condensaon may occur inside the
unit and the unit may not funcon properly; let the unit stand in power OFF for
1 or 2 hours before turning on the power: the unit should be dry before geng
any power.
10. Although this device is manufactured with the utmost care and checked several
mes before leaving the factory, it is sll possible that problems may occur, as with
all electrical appliances. If you noce smoke, an excessive build-up of heat or any
other unexpected phenomena, you should disconnect the plug from the main
power socket immediately.
11. This device must operate on a power source as specified on the specificaon label.
If you are not sure of the type of power supply used in your home, consult your
dealer or local power company.
12. Keep away from animals. Some animals enjoy bing on power cords.
13. To clean the device, use a sodry cloth. Do not use solvents or petrol based fluids.
To remove severe stains, you may use a damp cloth with dilute detergent.
14. The supplier is not responsible for damage or lost data caused by malfuncon,
misuse, modificaon of the device or baery replacement.

4
15. Do not interrupt the connecon when the device is formang or transferring files.
Otherwise, data may be corrupted or lost.
16. If the unit has USB playback funcon, the USB memory sck should be plugged
into the unit directly. Don’t use an USB extension cable because it can cause
interference resulng in failing of data.
17. The rang label has been marked on the boom or back panel of the device.
18. This device is not intended for use by people (including children) with physical,
sensory or mental disabilies, or a lack of experience and knowledge, unless
they’re under supervision or have received instrucons about the correct use of
the device by the person who is responsible for their safety.
19. This product is intended for non professional use only and not for commercial or
industrial use.
20. Make sure the unit is adjusted to a stable posion. Damage caused by using this
product in an unstable posion vibraons or shocks or by failure to follow any
other warning or precauon contained within this user manual will not be covered
by warranty.
21. Never remove the casing of this device.
22. Never place this device on other electrical equipment.
23. Do not allow children access to plasc bags.
24. Only use aachments/accessories specified by the manufacturer.
25. Refer all servicing to qualified service personnel. Servicing is required when the
device has been damaged in any way, such as the power supply cord or the plug,
when liquid has been spilled or objects have fallen into the device, when the
device has been exposed to rain or moisture, does not operate normally, or has
been dropped.
26. Long exposure to loud sounds from personal music players may lead to temporary
or permanent hearing loss.
27. If the product is delivered with power cable or AC power adaptor:
If any trouble occurs, disconnect the AC power cord and refer servicing to
qualified personnel.
Don’t step on or pinch the power adaptor. Be very careful, parcularly
near the plugs and the cable’s exit point. Do not place heavy items on the
power adaptor, which may damage it. Keep the enre device out of
children’s reach! When playing with the powercable, they can seriously
injure themselves.
Unplug this device during lightning storms or when unused for a long period.
The socket outlet must be installed near the equipment and must be easily
accessible.
Do not overload ac outlets or extension cords. Overloading can cause fire or
electric shock.
Devices with class 1 construcon should be connected to a main socket
outlet with a protecve earthed connecon.
Devices with class 2 construcon do not require an earthed connecon.

5
Always hold the plug when pulling it out of the main supply socket. Do not
pull the power cord. This can cause a short circuit.
Do not use a damaged power cord or plug or a loose outlet. Doing so may
result in fire or electric shock.
28. If the product contains or is delivered with a remote control containing coin/cell
baeries:
Warning:
“Do not ingest baery, Chemical Burn Hazard” or equivalent working.
[The remote control supplied with] This product contains a coin/buon
cell baery. If the baery is swallowed, it can cause severe internal burns
in just 2 hours and can lead to death.
Keep new and used baeries away from children.
If the baery compartment does not close securely, stop using the
product and keep it away from children.
If you think baeries might have been swallowed or placed inside any
part of the body, seek immediate medical aenon.
29. Cauon about the use of Baeries:
Danger of explosion if baery is incorrectly replaced. Replace only with
the same or equivalent type.
Baery cannot be subjected to high or low extreme temperatures, low
air pressure at high altude during use, storage or transportaon.
Replacement of a baery with an incorrect type that can result in an
explosion or the leakage of flammable liquid or gas.
Disposal of a baery into fire or a hot oven, or mechanicallycrushing or
cung of a baery, that can result in an explosion.
Leaving a baery in an extremely high temperature surrounding
environment that can result in an explosion or that leakage of flammable
liquid or gas.
A baery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
Aenon should be drawn to the environmental aspects of baery
disposal.
INSTALLATION
• Unpack all parts and remove protecve material.
• Do not connect the unit to the mains before checking the mains voltage and before
all other connecons have been made.

6
REAR PANEL
1. FMAntenna
2. DC INPUT
3. MIC: Wired Mic input socket
4. GUITAR: Guitar input socket
5. LINE-IN: Line-in input socket
6. Charging Light
7. USB: USB input socket
8. POWER SWITCH: Press this switch to turn
the unit ON or OFF
TOP PANEL
1. STANDBY: Press and hold for Standby, ON, and OFF.
2. SOURCE: Press this key to change the sources between USB, BT, FM, LINE.
3. X.BASS: Press the key to turn the extra bass effect ON/OFF.
4. MENU: Press this key to change the menu between MIC, GUITAR, VOLUME, ECHO
VOLUME, BASS, TREBLE.
5. VOLUME -/+: To adjust the levels.
6. LED DISPLAY: To display speaker status.
7. FM auto -scan/ /TWS: InFM mode, press for the fully automatic search. Press to
PLAY/PAUSE a track at USB/BT input mode. Press and hold on to change the TWS (true
wireless stereo) mode on or off.
8. : To play the previous song at USB/BT input mode.
9. : To play the next song at USB/BT input mode.
10. DISCOBALL/LIGHT: Hold this key to DISOBALL on or off. Press to change the front
speaker light mode between LED1,LED2,LED3,LED4,OFF.

7
REMOTE CONTROL
1) SOURCE
Presstochangethesourcebetween
USB,AUX,BT,FM
2) 0~9 NUMERIC KEYS These keys are used to
play a track directly in USB source mode.
Eg:To play 12th track in the USB playlist
press the numeric key"1" followed by"2". In
FM,to select saved channel,or input station
frequency directly
3) BTPresstoenterBluetoothpairingmode.
4) /CH+
Play the next song by pressing " /CH+" at
USB/BT input mode.
Adjust next channel by pressing " /CH+" at
FM input mode.
5) /TU-
Fast rewind a song by pressing " /TU-" at
USBinput mode.
Adjustradio frequencyby pressing " /TU-"at
FM input mode.
6) /CH-
Play the previous song by pressing " /CH-
" at USB BT input mode.
Adjust previous channel by pressing "
/CH-" at FM input mode.
7) GUITER/MIC VOL- To decrease the guiter
and MIC volume.
8) VOL- To decrease the volume.
9) BASS-To decrease the bass effect.
10)TREB-To decrease the Treble effect.
11)ECHO-To decrease the echo effect.
12)ECHO+To increase the echo effect
13)REPEAT
Choose repeat mode by pressing "REPEAT"
at USB input mode.
Repeat random,single, all.
14)TREB+To increase the Treble effect.
15)LED SHOW
To change the light mode
betweenLED1,LED2,LED3,LED4,OFF.
16)BASS+To increase the bass effect.
17)X.BASS
Press this key to turn ON/OFF the extra bass
effect.
18)VOL+ To increase the volume.
19)GUITER/MIC VOL+
To increase the GUITER and MIC volume.
20)MUTE
Press this key to MUTE/UNMUTE the
speaker volume.
21)/TU+
Fast forward song by pressing " /TU+" at
USB input mode.
Adjust radio frequency by pressing "
/TU+" at FM input mode.
22)/AUTO
●Play / pause in USB/BT mode.
●In FM mode press for the full automatic
search.
23)DISCONNECT In BT, Press to disconnect
and pair with a new device.
24)STANDBY
Stand by ON/OFF key.

8
OPERATING
Bluetooth pair and connect
Turn off any Bluetooth devices previously paired (linked) with this unit.
Turn on the Bluetooth feature on your phone or music player.
Turn on and set this unit to Bluetooth mode.The flashing :“bt” on LED display indicates it
is in pairing mode.
Set your phone or music player to search for Bluetooth devices.
Select “Lenco PA-260" from search results on your phone or music player.
Select OK orYES to pair this unit with your phoneor music player.
If protected, enter 0000for passkey steady blue light indicates successful connection.
Hold pair key to disconnect current convection and eater pairing mode.
“This product has a bluetooth receptionfunction, you can not transmit any bluetooth
sound with it: this means that you can receive wirelessly a bluetooth sound signal from an
external source like a smartphone.”
TWS (True Wireless Stereo) mode
1. Turn on 2 PA-260 equipments and select both unit INPUTmode as Bluetooth.
2. Press "TWS" key on speaker setfor 2 seconds, it will show " " on display, TWS is
connecting to another speaker equipment and will connect successfully afterasound
indication or display shows "bt".
3. Turn on your Bluetooth feature on your mobile phone to search Bluetooth devices and
select “Lenco PA-260" from the search result, select OK or YES to pair this unit with your
mobile phones and a steady blue light will indicate the connection is successful and can
play any music from your mobile phones.
4. Press "TWS" key on speaker unit for 2 seconds and it will turn off TWS features after
shows " " on display.
(The "LEFT" channel will be the speakerA, the other speaker will be the "RIGHT" channel.)
FM Radio Operation
1. Before using the radio functions, you must attach the supplied antenna. Adjust the
antenna to obtain optimum reception.
Press [SOURCE] repeatedly to select FM mode.
2. Press the CH+/CH- key on the remote control or Hold the key “ / ” on the top panel
to skip to the preset station.
3. Press the TU+/TU- key on the remote control or press the key “ / ” on the top panel
to adjust the radio frequency manually.
The number key on the remote control can directly select the frequency. Such as enter
“8,8,1” keys for 88.1MHz, “1,0,4,0" keys for 104.0MHz.
4. Press the PLAY key on the remote control or Press the key “ ” on the top panel, the
machine will scan radio channels from low-frequency to high-frequency by itself and
memorize the channels one by one.

9
OPERATING
BATTERY
In AC (power) mode the battery will automatically charge. A slow red flashing light indicates
that the battery is charging. When fully charged a green light will be displayed.
In DC (battery) mode a green light indicates that the battery level is full. If the battery level is
low a red light will be displayed. This indicates that the battery must immediately be charged or
the speaker will turn off.
LINE IN
Power on

10
OPERATING
SPECIFICATION
Frequency Response .....................................................................25Hz-20KHz
Power Source.................................................................................100-240V~, 60/50Hz
Power Consumption.......................................................................120W
Output power..................................................................................150W
Microphone.................................................................................... Wireless 864 & 865MHz
Bluetooth........................................................................................ V5.0
FM radio.........................................................................................87.5-108 MHz
Unit Size (W x D x H) .....................................................................30.5x30x78.5cm
Tweeter size................................................................................... 1 x 1 inch
Woofer size .................................................................................... 1 x 8 inch
Subwoofer size............................................................................... 1 x 8 inch
Unit weight.....................................................................................11kg
Working Temperature .................................................................... 10-40 ºC
The specification presents only as a reference. The value of weight and size are
approximation.
Our product is improved ceaselessly andthe specification and function may be changed
without prior notice.
Power supply adaptor (For EU only)
Manufacturer: GUANGZHOU GUANG ER ZHONG ELECTRONIC TECHNOLOGY CO.,LTD
Model number: GPUSW2003000WD00
Use only the power supply listed in the user instructions
Information Valueandprecision
Manufacturersnameortrademark,commercialregistration
andaddress
ModelIdentifier 20V/3A
InputvoltageAC100-240V,DC20V
InputACfrequency 50/60Hz
Outputvoltage20V
Outputcurrent 3A
OutputPower 60W
Averageactiveefficiency 88%
Efficiencyatlowload(10%) 85%
NoloadPowerconsumption 0.15W