Lenovo V130-20IGM AIO Owner's manual

V130–20IGM AIO User Guide and Hardware
Maintenance Manual
Energy Star Machine Types: 10RX

Note: Before usin this information and the product it supports, be sure to read and understand the
Important Product Information Guide and Appendix A “Notices” on pa e 51.
First Edition (April 2018)
© opyright Lenovo 2018.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services
Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-
35F-05925.

Contents
hapter 1. Overview. . . . . . . . . . . 1
Front view . . . . . . . . . . . . . . . . . . 1
Rear view . . . . . . . . . . . . . . . . . . 2
System board . . . . . . . . . . . . . . . . 3
Machine type and model label . . . . . . . . . . 5
hapter 2. Specifications . . . . . . . . 7
hapter 3. omputer locks . . . . . . . 9
Attachin a Kensin ton-style cable lock . . . . . . 9
hapter 4. Replacing hardware . . . . 11
Before replacin hardware . . . . . . . . . . 11
Knowin FRUs (includin CRUs) . . . . . . . . 11
Locatin FRUs (includin CRUs) . . . . . . . . 12
Adjustin the computer stand . . . . . . . . . 14
Replacin the power adapter . . . . . . . . . 15
Replacin the tilt-only monitor stand base . . . . 17
Removin the front cover . . . . . . . . . . . 17
Replacin the tilt-only monitor stand. . . . . . . 19
Replacin the optical drive . . . . . . . . . . 20
Replacin the 2.5-inch stora e drive. . . . . . . 24
Replacin the power button board . . . . . . . 25
Replacin the system board shield . . . . . . . 27
Replacin the internal speakers . . . . . . . . 28
Replacin the coin-cell battery . . . . . . . . . 29
Replacin the M.2 stora e drive . . . . . . . . 32
Replacin the memory module . . . . . . . . . 34
Replacin the Wi-Fi card . . . . . . . . . . . 35
Replacin the system board and heat sink . . . . 39
Replacin the system board bracket. . . . . . . 42
Replacin the computer stand bracket . . . . . . 43
Replacin the Wi-Fi antennas . . . . . . . . . 44
Replacin the inte rated camera . . . . . . . . 46
Replacin the LCD panel . . . . . . . . . . . 46
Completin the parts replacement . . . . . . . 49
Appendix A. Notices. . . . . . . . . . 51
Appendix B. Trademarks . . . . . . . 53
© Copyri ht Lenovo 2018 i

ii V130–20IGM AIO User Guide and Hardware Maintenance Manual

hapter 1. Overview
This chapter provides basic information to help you et familiar with your computer.
Front view
Note: Your computer model mi ht look sli htly different from the illustration.
Figure 1. Front view
1 Inte rated camera activity indicator (optional) 2 Inte rated camera (optional)
3 Inte rated microphone 4 Power button
5 Headset connector 6 Card reader slot
7 USB 3.1 Gen 1 connector 8 USB 2.0 connector
9 Internal speakers (2)
1 Integrated camera activity indicator
Used to indicate the inte rated camera status. When the indicator is on, the camera is in use.
2 Integrated camera
Used to take pictures or hold a video conference.
3 Integrated microphone
Used to record sounds or use speech-reco nition software without usin a microphone..
4 Power button
© Copyri ht Lenovo 2018 1

Used to turn on your computer. When you cannot shut down the computer from the operatin system, press
and hold the power button for four or more seconds to turn off the computer.
5 Headset connector
Used to connect a headset or a set of headphones to your computer. You can use the headset to record
sounds, use speech-reco nition software, and listen to the sounds from your computer without disturbin
anyone. You can use the headphones only to listen to the sounds from your computer.
6 ard reader slot
Used to hold a card-shaped stora e medium and make the data read by the card reader.
7 USB 3.1 Gen 1 connector
Used to connect a USB-compatible device. For optimal data transfer, connect a USB 3.1 Gen 1 device to a
USB 3.1 Gen 2 or USB 3.1 Gen 1 connector instead of a USB 2.0 connector.
8 USB 2.0 connector
Used to connect a device that requires a USB 2.0 connection.
9 Internal speaker
Used to listen to the sounds from your computer without usin a set of headphones or a headset.
Rear view
Note: Your computer model mi ht look sli htly different from the illustration.
Figure 2. Rear view
1 Optical drive eject/close button (optional) 2 Optical drive activity indicator (optional)
3 Security-lock slot 4 Power adapter connector
2V130–20IGM AIO User Guide and Hardware Maintenance Manual

5 HDMITM 1.4 out connector 6 Ethernet connector
7 USB 2.0 connectors (3) 8 USB 3.1 Gen 1 connector
1 Optical drive eject/close button
Used to eject the tray of the optical drive out of the drive. After you insert a disc into the tray, press the eject/
close button to close the tray.
2 Optical drive activity indicator
When the optical drive activity indicator is on, the optical drive is in use.
3 Security-lock slot
For information, see “Attachin a Kensin ton-style cable lock” on pa e 9.
4 Power adapter connector
Used to connect the power adapter to your computer for power supply.
5 HDMI 1.4 out connector
Used to send audio and video si nals from the computer to another audio or video device, such as a hi h-
performance monitor.
6 Ethernet connector
Used to connect an Ethernet cable for network access.
7 USB 2.0 connector
Used to connect a device that requires a USB 2.0 connection.
8 USB 3.1 Gen 1 connector
Used to connect a USB-compatible device. For optimal data transfer, connect a USB 3.1 Gen 1 device to a
USB 3.1 Gen 2 or USB 3.1 Gen 1 connector instead of a USB 2.0 connector.
System board
Note: See “Front view” on pa e 1 and “Rear view” on pa e 2 for additional component descriptions.
Chapter 1.Overview 3

Figure 3. System board
1 LCD panel connector 2 M.2 Wi-Fi card slot
3 Memory slot 4 Inte rated camera connector
5 Optical drive connector 6 Power button connector
7 Coin-cell battery 8 M.2 stora e drive slot
9 Internal speaker connector 10 Microprocessor
4V130–20IGM AIO User Guide and Hardware Maintenance Manual

Machine type and model label
The machine type and model label identifies the computer. When you contact Lenovo for help, the machine
type and model information helps support technicians to identify the computer and provide faster service.
The machine type and model label is attached on the rear side of the computer as shown.
Figure 4. achine type and model label
Chapter 1.Overview 5

6V130–20IGM AIO User Guide and Hardware Maintenance Manual