Lenovo smart lock F1 PRO User manual

USER MANUAL

1 : ADMIN SETTINGS
a. Press [*] twice, it will give the voice prompt “Please add 6-digit Administrator Password and press
[#] key to confirm”, user input 6-digit password and press [#] key to confirm.
b. It will give the voice prompts “Please add 6-digit administrator password again, press [#] to
confirm”, then enter the same set of group password.
c. It will give the voice prompts “Add successfully”, the system automatically jumps to the main
menu, and the user can exit or perform other operations according to
the voice navigation.
1.1 : ADD ADMINISTRATOR PASSWORD
1.2 : ENTER THE MAIN MENU
Light up the touch screen and press [*] twice, please use the Administrator Fingerprint or Password
for verification to enter the main menu. Entering the main menu must be verified by entering the
administrator information. After entering the main menu, users can select the operation according
to the menu number and press the corresponding numeric key.
1. Add Face
2. Add Fingerprint,
Password or RFID Card. If
You Add Password, Please
Press [#] to confirm
1. Add Users
2. Delete User
3. System
Settings
1
1. Delete All
2. Verify to Delete
3. Delete by Number
2
1. Volume Settings
2. Network Settings
3. Double Verification
Settings
4. Set The Query Door
Lock Information
5. Face Infrared Settings
6. Installation Settings
Please [#] to Confirm All
Deletions
Press [*] to cancel
1. High Volume Mode
2. Middle Volume Mode
3. Low Volume Mode
4. Mute Mode
1
1. Turn On Dual
Aunthentication Mode
2. Turn Off Dual
Aunthentication Mode
3
1. Turn On The Network
2. Turn Off The Network
2
1. Turn On Face Infrared
2. Turn Off Face Infrared
5
1. Open Direction Settings
2. Lock Time Settings
6
1. Set The Time
2. Check Time
4
1. Smart Distribution
Network
2. Hotspot Distribution
Network
1
1. Open Toward Left
2. Open Toward Right
1
1. Locking 5 seconds
2. Locking 10 seconds
3. Locking 20 seconds
4. Locking 30 seconds
5. Close Locking
2
3
1
1. Enter the Face to be
Deleted
2. Enter the Fingerprint,
Password or RFID Card
to be Deleted
2
1. Delete Password by
Number
2. Delete RFID Card by
Number
3. Delete Fingerprint by
Number
4. Delete Face by Number
3

1. Add Users
2. Delete User
3. System Settings
2 : USER SETTING
CAUTION
CAUTION
Light up the touch screen and press [*] twice, please use the Administrator Fingerprint or Password
for verification to enter the main menu. Entering the main menu must be verified by entering the
administrator information. After entering the main menu, users can select the operation according to
the menu number and press the corresponding numeric key.
The user places a finger on the fingerprint sensor. When hearing the voice prompts “Please enter
fingerprints again”, the user places the same finger on the sensor. It will give you the voice prompts
“Add successfully. If you continue to add, please press the [#] key, and please the [*] key to exit.”
a. To enter a fingerprint, the user needs to record the fingerprint 4-6 times continuously.
b. When collecting fingerprints, try to collect as many times as possible from different locations on
the same finger, so that the subsequent verification of fingerprints is easier to be recognized.
2.1 : ADD FINGERPRINT
a. Press [*] twice to enter Admin Mode, press [1] to add user, and then press [1] to add user's face.
b. Follow the voice prompts to enter the front face, right part of face, left part of face, bottom part
of face and top part of face in the face recognition area, and wait until you hear the voice prompt
“add successfully”, which means the user’s face is added successfully.
2.1 : ADD FACE
The user enter a 6-digit password, press [#] to confirm, and when hearing the voice prompts “Please
enter the same password again”, the user enter the same password. It also supports the dummy
password function. The user can add random numbers before and after the correct password to
achieve password input and verify unlocking.
For verification, it can include up to 32 digits dummy password, only one set of password can be
included which can not be repeated.
2.2 : ADD PASSWORD
The user shall put the induction card close to the antenna receiving area, and it will give the voice
prompts “add successfully”.
2.3 : ADD RFID CARD
1. Add Face
2. Add Fingerprint,
Password or RFID Card. If
You Add Password, Please
Press [#] to confirm
1. Promp: Please Record
Positive Face.
2. Please add Fingerprint,
Password or RFID Card
1
1
2

CAUTION
Press [*] twice on the touch screen to verify with the Administrator’s Fingerprint or Password to
enter the main menu. To enter the main menu, you must enter the administrator information to
verify. After entering the main menu, users can press the corresponding numeric key to select the
operation according to the menu number.
a. When hearing the voice prompt “Delete all”, users can delete all Faces, Passwords, Fingerprints
and RFID Card.
b. When hearing the voice prompt “Confirm the deletion”, press the [#] key to confirm and press the
[*] key to cancel.
2.4 : DELETE USER
2.4.1 : DELETE ALL
a. When hearing the voice prompt “Verify to delete the recorded face”, you need to verify that the
user has recorded the face, and the system will delete the recorded face after passing the verifica-
tion.
b. When hearing the voice prompt “Verify to delete the recorded fingerprint, password or access
card”, you need to verify that the user has recorded the fingerprint/ password/ door card, and the
system will delete the recorded fingerprint/ password/ door card after passing the verification.
The current administrator can not be deleted, the system guarantees at least one administrator can
not be deleted to avoid the lock in the default state, the user can open the lock at will, and the user
will not be able to enter the management menu.
2.4.2 : VERIFY TO DELETE
1. Add Users
2. Delete User
3. System Settings
1. Delete All
2. Verify to Delete
3. Delete by Number
Delete All
Confirm by pressing [#]
Cancel by pressing [*]
2 1
1. Add Users
2. Delete User
3. System Settings
1. Delete All
2. Verify to Delete
3. Delete by Number
1. Verify to delete recorded
face
2. Verify to the Fingerprint,
Password or RFID Card that
have been recorded.
When hearing the voice prompt “Delete Password / RFID Card / Fingerprint / Face by Number”, user
can input 3-digit user number, such as “001”. If the users have been included in the system, it will
give the voice prompts “Delete successfully”, if the users have not been included in the system, it will
give the voice prompts “Operation failed”.
2.4.3 : DELETE BY NUMBER
2 2
1. Add Users
2. Delete User
3. System Settings
1. Delete All
2. Verify to Delete
3. Delete by Number
1. Delete Password by
Number
2. Delete Induction Card
by Number
3. Delete Fingerprint by
Number
4. Delete Face by Number
23

3.1.2 : PINCODE UNLOCK
3.1 : OPERATION IN THE COMMON MODE
Wake up the panel to enter the password + [#] key. After it is verified, the lock can be opened.
3 : METHOD OF USE
3.1.3 : FINGERPRINT UNLOCK
3.1.4 : RFID TAG UNLOCK
Place the induction card in the proximity area to unlock after successful verification.
3.6 : EMERGENCY OPENING METHOD
In case of emergency such as forgetting the password, running out of battery power or the system
cannot operate, you can use the mechanical key to unlock the door. Insert the mechanical key into the
spare mechanical key port under the handle to unlock
3.6.1 : MECHANICAL KEY
When the battery runs out and there is no brass key, you can connect an external rechargeable battery
or 5V1A power supply for emergency power supply, and open the door according to the normal opera-
tion steps. After opening the door with emergency power, please replace the battery in the lock in time.
3.6.1 : MICRO USB POWER SUPPLY
Turn the handle to right to lock the door
3.3 : LOCK THE DOOR INTERNALLY
3.2 : UNLOCK THE DOOR INTERNALLY
3.3.1 : HANDLE LOCK
Turn the handle to left to unlock the door
3.2.1 : HANDLE UNLOCK
Turn the knob which the door can’t unlock
from outdoor
3.3.2 : DOUBLE LOCK
After the door closing sensing tongue is pressed, the main tongue will be automatically released, and
the door will be locked automatically.
3.5 : AUTOMATICALLY LOCK
Press the lock button to lock the door.
3.4 : LOCK BUTTON
Press the button to unlock the door
3.2.2 : BUTTON UNLOCK
3.1.1 : FACE UNLOCK
Make the recorded face close to the lock. When the lock end recognizes the face information, and face
is verified successfully, it will give a voice prompt “verify successfully, and the lock has been opened”.
Press the fingerprint area to open the lock. After it is verified, the lock can be opened

CAUTION
CAUTION
The pictures in the User Manual is for reference only which shall be subject to the product in kind.
4 : FACTORY DATA RESET
After the factory Settings are restored, all user data will be
cleared. Exercise caution when performing this operation.
Press This Key
to Restore Factory
Defaults
5 : PRODUCT INTRODUCTION
Peep Hole Camera
Battery Compartment
Reset Button
Rear Handle
Double Lock Rotary
Knob
Lock Switch Button
Face Recognition Camera
Password Area
Card Reading Area
Doorbell Button
Infrared Detection
Lock Button
Indicator
Hidden Fingerprint Head
Key Hole & Micro USB
Charger Hole

www.lenovosmartlock.com