Lenovo LJ2206W User manual

Unpack the machine and check the components
Read the Product Safety Guide first, then read this Quick Setup Guide for the
correct installation procedure.
NOTE:
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 metres (6 feet) long.
Remove the packing materials and install the toner cartridge
Load paper in the paper tray
Connect the machine to your computer/mobile device
Connect the power cord and turn on the machine
Inbox/Starter Toner Cartridge A5 Long Edge Paper Input
Support
CD‑ROM
USB Interface Cable Quick Setup Guide Product Safety Guide
3
2
4
1
• Windows®PC with a CD-ROM drive, go to step 4A
• Windows®PC without a CD-ROM drive, go to step 4B
• Macintosh, go to step 4B
• Mobile device users with a WPS/AOSS™-supported access point/router, go to step 4C
Back Front
POWER OFF READY SLEEP
DEEP SLEEP
WARMING UP
COOLING DOWN
RECEIVING DATA
DATA REMAINING TONER LOW REPLACE TONER PAPER JAM DRUM END SOON REPLACE DRUM
Dimmed 1 second interval 0.5 second interval
Printer LED Indications Blinking: or ON: OFF:
Adjust the paper guides to fit
the paper being used.
To use A5 Long Edge paper.
NOTE:
Before pull off the protective cover, please gently shake the cartridge from side
to side several times to spread the toner evenly inside the cartridge.
For Network Machines: Machine Secure Network Access
Your machine’s Administrator default password is on the label on the back
of the machine (preceded by “Pwd:”).
Attention: We strongly recommend you change it immediately to protect
your machine from authorized access.
Quick Setup Guide
LJ2206W
The latest manuals are available at our website:
https://www.lenovoimage.com/.
Version 3.0

Configuration using the CD-ROM (Windows®)
Follow the on-screen instructions
until the Connection Type
screen appears.
Finish
4A
You can download the latest device driver for free from our website, enabling you to use your Lenovo machine as a printer.
Visit us at https://www.lenovoimage.com/.
After you download the driver and software package, follow the on-screen instructions until the Connection Type screen appears. Refer to 4A Configuration using the CD-ROM
(Windows®).
If your wireless LAN access point/router supports automatic wireless (one-push) setup (WPS/AOSS™), you can set up your machine without using a computer.
Connection Type
For USB Connection
For Wireless Network Connection
We recommend preparing a USB cable
to use temporarily during the wireless
setup.
Follow the on-screen
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
One-push wireless setup for mobile devices
Wireless Network Connection
[Recommended]
Select this option if you have a USB cable to
use temporarily for wireless setup.
Select this option if you do not have a USB cable.
Follow the on-screen
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
Configuration without using the CD-ROM (Windows®without CD-ROM drive or Macintosh)
4C
4B
Wireless setup is now complete.
Finish
Press the WPS or AOSS™ button on your
wireless LAN access point/router.
Press and hold the WiFi button on your
machine for about 2 seconds. The WiFi
button will light up when connected.
NOTE:
If the Lenovo screen does not appear automatically, go to Computer (My Computer).
(For Windows®8: click the (File Explorer) icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then double-click start.exe.