Lenoxx CD-52 Operator's manual

QUICK INSTRUCTIONS
MODEL CD-52
POWERING UP
Power your CD player by connecting the AC ADAPTOR or by inserting 2 size AA fresh alkaline
batteries.
AC Adaptor Operation
Insert the Adaptors small connector plug into the DC 4.5V Jack (on the right), and plug the
Adaptor into an AC outlet.
Battery Operation
1. Open the BATTERY DOOR.
2. Insert 2 size AA fresh alkaline batteries as
shown.
NOTE: Player will not work, and batteries will be
drained, if not inserted as shown inside
the Battery Compartment.
3. Close the BATTERY DOOR.
AC OUTLET
TO DC JACK
(4.5V)
2 SIZE AA
BATTERIES
TO PHONES
JACK
1
NOTE: If the symbol   flashes in the display,
your batteries are weak and need
replacement.
BASS BOOST
Slide this switch to ON to give you more low frequency tones.
VOLUME CONTROL
Adjust this VOLUME CONTROL to your preference.
PLUGGING IN
Plug the headphones into the PHONES JACK on the
right side of the player, and put on the headphones.
CD52(22C-0E7)QI022100 NL v.1 E

QUICK INSTRUCTIONS
BASIC FEATURES
PAUSE
Pressing PLAY/PAUSE button while a disc is playing will pause play. (The elapsed playing time will
flash during pause.) Press PLAY/PAUSE again to continue play.
STOP (or POWER OFF)
Press the STOP button once to stop play and once more to shut off the power.
REPEAT
During play, press the REPEAT/RANDOM button once to repeat one song over and over,
 REPEAT 1  will show in the display. That song will play and repeat again and again till you press
STOP.
To repeat all songs, just press the REPEAT/RANDOM button twice,  REPEAT ALL will be steady
on.
Press the STOP button to quit repeat play.
SEARCH ( or )
During play, press and hold the SEARCH buttons or while the disc is playing to search
backward or forward through a particular track (or song).
Press it several times to skip to a later or earlier song, or to get back to the beginning of the song.
PROGRAMMING
To arrange the songs to play in a special sequence (1, 5, 2, 3, etc.) you can program the set to
your taste.
During play, press the PROGRAM button, use the SEARCH buttons ( or ) to select the
track you want, then press the PROGRAM button. Repeat pressing the SEARCH buttons (
or ) and PROGRAM button till you finish programming, then press PLAY.
FOR OTHER FEATURES INCLUDING DETAILED PROGRAMMING INSTRUCTIONS,
RANDOM AND INTRO PLAY INSTRUCTIONS, PLEASE REFER TO THE OPERATING
INSTRUCTIONS MANUAL.
2
PLAYING A DISC
You can play compact discs that have this logo:
1. Slide the OPEN button to open the CD DOOR.
2. Place a disc on the center post with the label facing up, and
then gently push down on the center of the disc until it clicks
in.
3. Close the CD DOOR, press the PLAY button, the display
tells you how many tracks are on the disc and total playing
time on the disc, the disc will play.
CD52(22C-0E7)QI022100 NL v.1 E