Lenoxx CD-625 Operator's manual

QI-CD625(CDR92C-0L8)-WM-E-121803
QUICK INSTRUCTIONS
MODEL CD-625
1
BASS BOOST
Slide this switch to ON to give you more low frequency tones.
VOLUME CONTROL
Adjust this VOLUME control to your preference.
1. Slide the CD/OFF/RADIO FUNCTION switch to the RADIO position, the POWER
ON indicator will be turned on.
2. Slide the AM/FM/FM STEREO BAND switch to select the desired wave band.
3. Tune to the desired station by rotating the TUNING control.
4. If you tune into an FM stereo station, FM STEREO indicator will light.
5. To turn off the radio, slide the CD/OFF/RADIO FUNCTION switch to CD or OFF
position.
RADIO OPERATION
PLUGGING IN
Plug the headphones into the PHONES JACK
on the left side of the player, and put on the
headphones.
POWERING UP
Power this CD player by connecting an optional (not included) AC ADAPTOR or by
inserting 2 size AA fresh alkaline batteries.
NOTE: Before you buy an AC Adaptor, please note the only AC ADAPTOR suitable for
this player is DC 4.5V 600mA, with polarity , others may damage this
player. Please check voltage and current (mA) before buying an AC ADAPTOR.
BATTERY OPERATION
1. Open the BATTERY DOOR.
2. Insert 2 size AA fresh alkaline batteries as
shown.
NOTE: Player will not work, and batteries will be
drained, if not inserted as shown on the
bottom of the set.
NOTE: If the symbol   shows in the display,
your batteries are weak and need
replacement.
3. Close the BATTERY DOOR.
TO PHONES
JACK
2 SIZE AA
BATTERIES
QI-CD625(CDR92C-0L8)-WM-E-121803.p65 12/20/02, 12:28 PM1

QI-CD625(CDR92C-0L8)-WM-E-121803
QUICK INSTRUCTIONS
BASIC FEATURES
PAUSE
Pressing PLAY/PAUSE button while a disc is playing will pause play (the playing time of
the current track will flash). Press PLAY/PAUSE again to continue play.
STOP AND POWER OFF
Press the STOP button once to stop play, and the set will turn itself off automatically
after 30 seconds.
To shut off the power immediately, press the STOP button twice or slide the CD/OFF/
RADIO FUNCTION switch to OFF position.
SKIP ( or )
During play, press and hold the SKIP/SEARCH buttons ( or ) while the disc is
playing to search backward or forward through a particular track (or song).
Press several times to skip to a later or earlier song, or to get back to the beginning of
the song.
PROGRAMMING
To arrange the songs to play in a special sequence (1, 5, 2, 3, etc.), you can program
the set to your taste.
Press the PROGRAM button, then press either SKIP button ( or ) to select the
track you want. Repeat pressing PROGRAM button and SKIP button ( or ) till
you finish programming, then press PLAY button. The set will play the songs in the
order that you programmed.
2
PLAYING A DISC
You can play compact discs that have this logo:
FOR OTHER FEATURES INCLUDING DETAILED PROGRAMMING,
INTRO AND RANDOM PLAY INSTRUCTIONS, PLEASE READ THE
OPERATING INSTRUCTIONS MANUAL.
1. Slide the CD/OFF/RADIO FUNCTION switch to the
CD position.
2. Slide the CD DOOR OPEN button to open CD DOOR.
3. Place a disc on the center post with the label side
facing up, and then gently push down on the center of
the disc until it clicks in.
4. Close the CD DOOR, press the PLAY button, the
POWER ON indicator will be turned on and the set
starts playing.
REPEAT
During play, press the REPEAT button once,  REPEAT ONE will show in the display. That
song currently playing will play and repeat again and again till you press STOP button.
To repeat all songs, press the REPEAT button twice. 
REPEAT ALL  will show in the
display. All songs will play and then repeat, press the STOP button to quit repeat play.
QI-CD625(CDR92C-0L8)-WM-E-121803.p65 12/20/02, 12:28 PM2