Lenoxx CD-85 Operator's manual

QI-CD85(21A-60C9)-WM-E-010603
QUICK INSTRUCTIONS
MODEL CD-85
Battery Operation
1. Open the BATTERY DOOR.
2. Insert 2 size AA fresh alkaline batteries as
shown.
NOTE: Player will not work, and batteries will be
drained, if not inserted as shown inside
the BATTERY COMPARTMENT.
3. Close the BATTERY DOOR.
TO PHONES
JACK
1
NOTE: If the symbol   shows or flashes in the
display, your batteries are weak and need
replacement.
BASS BOOST
Slide this switch to ON position to give you more low frequency tones.
VOLUME CONTROL
Adjust this VOLUME CONTROL to your preference.
HEADPHONES PLUGGING IN
Plug the headphones into the PHONES JACK on the
right side of the player, and put on the headphones.
POWERING UP
Power your CD player by connecting an optional AC ADAPTOR or by inserting 2 size AA fresh
alkaline batteries.
NOTE: Before you buy an optional AC Adaptor, please note the only AC ADAPTOR suitable
for this player is DC 4.5V 600mA with polarity , others may damage your player.
Please check voltage and current (mA) before buying an AC ADAPTOR.
2 SIZE AA BATTERIES
QI-CD85(21A-60C9)-WM-E-010603.p65 1/13/03, 12:24 PM1

QI-CD85(21A-60C9)-WM-E-010603
QUICK INSTRUCTIONS
BASIC FEATURES
PAUSE
Pressing PLAY/PAUSE button while a disc is playing will pause play. (The elapsed playing time will
flash during pause.) Press PLAY/PAUSE again to continue play.
STOP (or POWER OFF)
Press the STOP button once to stop play and the power will shut off automatically about 30
seconds later, or press the STOP button twice to shut off the power immediatelly.
REPEAT
During play, press the REPEAT/RANDOM button once to repeat one song over and over,
 REPEAT 1  will show in the display. That song will play and repeat again and again till you press
STOP.
To repeat all songs, just press the REPEAT/RANDOM button twice,  REPEAT ALL will be steady on.
Press the STOP button to quit repeat play.
SEARCH ( or )
During play, press and hold the SEARCH buttons or while the disc is playing to search
backward or forward through a particular track (or song).
Press it several times to skip to a later or earlier song, or to get back to the beginning of the song.
PROGRAMMING
To arrange the songs to play in a special sequence (1, 5, 2, 3, etc.) you can program the set to
your taste.
Press the PROGRAM button, use the SEARCH buttons ( or ) to select the track you
want, then press the PROGRAM button. Repeat pressing the SEARCH buttons ( or )
and PROGRAM button till you finish programming, then press PLAY.
2
PLAYING A DISC
You can play compact discs that have this logo:
1. Slide the OPEN button to open the CD DOOR.
2. Place a disc on the center post with the label facing up, and
then gently push down on the center of the disc until it clicks in.
3. Close the CD DOOR, press the PLAY button, the display
tells you how many tracks are on the disc and total playing
time on the disc, then the disc will play.
NOTE: This CD player will only play NORMAL music CDs (or CD-R
discs). This set will not play CD-RW encoded discs.
ESP
The ESP PLUSTM function will turn on automatically when the PLAY/PAUSE button is pressed.
Your music will not skip or stop when the set is shaken or vibrated for brief periods (after memory
buffer fills).
FOR OTHER FEATURES INCLUDING DETAILED PROGRAMMING INSTRUCTIONS,
RANDOM AND INTRO PLAY INSTRUCTIONS, PLEASE REFER TO THE OPERATING
INSTRUCTIONS MANUAL.
QI-CD85(21A-60C9)-WM-E-010603.p65 1/13/03, 12:24 PM2